Keyestudio RJ11 CCS811 CO2 Air Quality Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Keyestudio RJ11 CCS811 CO2 Air Quality Sensor Module is a digital indoor air-quality module for compatible Arduino and Keyestudio EASY Plug projects. The CCS811 sensor reports calculated equivalent CO2 (eCO2) and TVOC values over I2C for environmental monitoring and data logging.
- Brand: Keyestudio
- Sensor IC: CCS811 digital gas sensor
- Outputs: eCO2 and TVOC
- eCO2 Range: 400–8192ppm (calculated estimate)
- TVOC Range: 0–1187ppb
- Communication: I2C (SDA/SCL)
- Connector: Keyestudio RJ11-style EASY Plug
- Applications: Indoor air-quality monitoring, ventilation projects, data logging and STEM
Important: eCO2 is not direct CO2 measurement. This module is not a certified CO2/CO safety detector.
₨1,980.00
6 in stock
6 in stock
Description
The Keyestudio RJ11 CCS811 CO2 Air Quality Sensor Module is a digital indoor air-quality sensor module for Arduino, Keyestudio EASY Plug systems and compatible microcontrollers. Built around the CCS811 gas sensor, it reports equivalent CO2 (eCO2) and total volatile organic compounds (TVOC) over an I2C interface.
Use it for indoor air-quality experiments, smart-room displays, ventilation monitoring and environmental data logging. Important: eCO2 is an estimate derived from gas-sensor readings, not a direct carbon dioxide measurement.
Key Features
CCS811 Digital Gas Sensor
Provides processed digital readings for indoor air-quality monitoring projects.
Equivalent CO2 (eCO2)
Reports calculated eCO2 values across an output range of approximately 400–8192ppm.
TVOC Measurement
Provides total volatile organic compound readings from approximately 0–1187ppb.
I2C Communication
Uses SDA and SCL signals to communicate digital sensor readings to compatible controllers.
EASY Plug Connection
RJ11-style Keyestudio connector simplifies wiring with compatible EASY Plug hardware.
Indoor Environment Projects
Suitable for air-quality displays, ventilation experiments, smart rooms and data logging.
Understand eCO2 and TVOC Readings
The CCS811 provides two primary outputs:
- eCO2: Equivalent carbon dioxide, an estimated value generated by the sensor’s processing algorithms.
- TVOC: Total volatile organic compounds, representing the sensor’s estimate of VOC levels in the surrounding air.
Important distinction: The CCS811 does not directly measure CO2 using an NDIR infrared sensing method. It detects gases associated with volatile organic compounds and calculates an equivalent CO2 estimate. Use a dedicated CO2 sensor when your project requires direct CO2 concentration measurement.
Output Ranges
| eCO2 Output | Approximately 400–8192ppm |
|---|---|
| TVOC Output | Approximately 0–1187ppb |
These are sensor output ranges, not a guarantee of laboratory-grade accuracy or certified indoor-air assessment. The readings are best used within the intended capabilities of the CCS811 and to observe changes over time.
I2C Digital Communication
The CCS811 communicates using I2C. The two main bus signals are:
- SDA: Serial Data
- SCL: Serial Clock
A compatible microcontroller reads the processed eCO2 and TVOC values through the I2C bus. Check the module pinout, supply voltage and logic-level requirements before connecting it to your controller.
Keyestudio RJ11-Style EASY Plug Interface
This module uses Keyestudio’s RJ11-style EASY Plug connector for connection to compatible Keyestudio controllers and expansion boards. The connector is an electronics interface, not a telephone or Ethernet connection. Only connect it according to the appropriate Keyestudio pinout; do not plug it into ordinary network or telephone equipment.
Indoor Air Quality and Ventilation Projects
A compatible controller can read the sensor periodically and show eCO2 and TVOC values on an LCD, OLED or other suitable display. Measurements can also be logged to observe changes associated with room occupancy, ventilation and indoor activities.
In a ventilation prototype, software can compare readings with user-defined thresholds and trigger an alert or control output. Fans and other powered equipment must be operated through an appropriately rated relay, MOSFET or driver, not directly from a microcontroller GPIO pin.
Environmental Compensation and Sensor Stabilisation
The CCS811 supports environmental compensation using temperature and humidity information supplied by the host controller. A suitable temperature and humidity sensor can therefore be added to a more complete monitoring project, provided the selected software library supports this function.
Gas-sensor readings need suitable operating and stabilisation time. Do not assume readings immediately after power-up are fully stabilised. For consistent trend monitoring, follow the sensor manufacturer’s operating, conditioning and baseline-management recommendations. Baseline handling depends on the software library and project design.
Data Logging and Display Ideas
- Record eCO2 and TVOC readings over time.
- Add temperature and humidity from compatible external sensors.
- Use a real-time clock to associate readings with date and time.
- Display current values on an LCD or OLED screen.
- Build educational experiments to compare readings under different indoor conditions.
CCS811 vs Dedicated CO2 Sensors
The CCS811 estimates eCO2 from gas-sensing information; it does not directly measure carbon dioxide concentration. A dedicated NDIR CO2 sensor uses infrared absorption to measure CO2 directly. Choose a dedicated CO2 sensor for projects that require direct CO2 readings rather than an equivalent estimate.
CCS811 vs MQ-Series Gas Sensors
Many MQ-series modules provide analogue outputs that vary with the sensing element’s response. The CCS811 offers an integrated digital approach with I2C output for eCO2 and TVOC. Neither type should automatically be treated as certified gas-detection or life-safety equipment.
Important Safety Limitations
This module is intended for electronics development, indoor air-quality experiments, education and environmental monitoring. It is not a certified safety gas detector and should not be used as the sole device for hazardous-gas alarms, fire detection, occupational exposure monitoring or other life-safety applications.
The eCO2 output is not a carbon monoxide (CO) reading. This module is not a replacement for an approved household carbon monoxide alarm, nor should it be relied on as safety-critical direct CO2 monitoring equipment.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Product Type | Digital Air Quality Sensor Module |
| Sensor IC | CCS811 |
| Measured Outputs | eCO2 and TVOC |
| eCO2 Output Range | 400–8192ppm |
| TVOC Output Range | 0–1187ppb |
| Communication | I2C |
| Bus Signals | SDA and SCL |
| Connector | Keyestudio RJ11-style EASY Plug interface |
| Sensor Type | Digital metal-oxide gas sensor |
| CO2 Measurement | Calculated equivalent CO2 (eCO2); not direct NDIR CO2 |
| Applications | Indoor air quality, environmental monitoring, data logging and automation |
Package Contents
- 1 × Keyestudio RJ11 CCS811 CO2 Air Quality Sensor Module
Controller board, EASY Plug cable, display, power supply and other project hardware are not confirmed as included unless specifically listed with the supplied package.
Frequently Asked Questions
Does the CCS811 directly measure CO2?
No. It calculates an equivalent CO2 (eCO2) value from gas-sensing measurements. It is not a direct NDIR carbon dioxide sensor.
What does eCO2 mean?
eCO2 means equivalent carbon dioxide. It is an estimated value generated by the CCS811 algorithms, not a direct measurement of CO2 molecules.
What does TVOC mean?
TVOC stands for Total Volatile Organic Compounds. It represents the sensor’s estimate of volatile organic compound levels in the surrounding air.
What is the eCO2 output range?
The stated eCO2 output range is approximately 400 to 8192ppm.
What is the TVOC output range?
The stated TVOC output range is approximately 0 to 1187ppb.
How does the module communicate?
The CCS811 uses I2C digital communication, with SDA (data) and SCL (clock) signals.
What is the RJ11 connector for?
It is Keyestudio’s RJ11-style EASY Plug electronics interface for compatible controllers and expansion boards. It is not a telephone or Ethernet connection.
Can I use it for indoor air-quality monitoring?
Yes. It can report eCO2 and TVOC values for indoor monitoring projects, displays and trend logging within the sensor’s intended capabilities.
Does the sensor need time to stabilise?
Yes. Allow appropriate operating and stabilisation time, and follow the manufacturer’s guidance for conditioning and baseline management. Initial readings may not represent stable operation.
Can I combine it with a temperature and humidity sensor?
Yes. A compatible temperature and humidity sensor can provide environmental information for compensation where supported by the CCS811 software library, and can add more readings to your monitoring display.
Can it control a ventilation fan?
The sensor only provides measurements. A microcontroller can make control decisions, but a fan must be driven through a suitably rated relay, MOSFET or motor driver and appropriate power supply.
Can I use it as a carbon monoxide alarm?
No. The CCS811 is not a certified CO detector and must not replace an approved household carbon monoxide alarm.
Is it suitable for safety-critical CO2 monitoring?
No. It reports calculated eCO2 rather than directly measured CO2 and should not be relied upon for safety-critical CO2 monitoring.
Why Buy from PcGuy Computers?
| Pakistan-focused support | Product and project guidance for customers in Pakistan. |
|---|---|
| Pakistan-wide shipping options | Delivery options can be selected according to destination and service availability. |
| Related electronics range | Explore Arduino-compatible boards, Keyestudio modules, environmental sensors and project components. |
| Practical product guidance | Clear product information to help check interface and project compatibility. |
PcGuy Computers offers electronics modules and components for Arduino projects, STEM learning, IoT, monitoring and automation across Pakistan.
Buy the Keyestudio RJ11 CCS811 CO2 Air Quality Sensor Module in Pakistan for eCO2 and TVOC trend monitoring, indoor air-quality displays, environmental data logging and compatible EASY Plug projects.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.