DHT11 Temperature Humidity Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the DHT11 Temperature Humidity Sensor Module in Pakistan for Arduino, ESP32 and DIY environmental monitoring. This digital sensor measures ambient temperature and relative humidity through a simple single-bus data interface.
- Sensor Model: DHT11
- Operating Voltage: 3.3V–5.5V DC (sensor specification)
- Temperature Range: 0°C to 50°C
- Temperature Accuracy: ±2°C
- Humidity Range: 20%–90% RH
- Humidity Accuracy: ±5% RH
- Output: Digital Single-Bus
- Read Interval: At least 2 seconds
- Applications: Weather Stations, Room Monitoring, IoT and STEM Projects
Note: DHT11 is an entry-level sensor, not a precision measurement device. Check module pin labels before wiring.
₨660.00
47 in stock
47 in stock
Description
The DHT11 Temperature and Humidity Sensor Module measures ambient temperature and relative humidity and sends the readings to a microcontroller through a digital single-bus interface. It is a beginner-friendly option for Arduino weather stations, room-condition monitoring, greenhouse experiments and basic smart-home prototypes.
Key Features
Measures ambient temperature across the standard DHT11 range of 0°C to 50°C.
Reads relative humidity from approximately 20% to 90% RH.
Sends temperature and humidity data over one digital data line using the DHT11 protocol.
The DHT11 sensor operates from 3.3V to 5.5V DC, subject to the supplied module’s circuit.
The sensor provides calibrated digital readings without requiring an external analogue measurement circuit.
Works with common microcontrollers and widely available DHT sensor libraries.
Technical Specifications
| Sensor Model | DHT11 |
|---|---|
| Sensor Type | Digital temperature and relative humidity sensor |
| Operating Voltage | 3.3V–5.5V DC (sensor specification) |
| Temperature Range | 0°C to 50°C |
| Temperature Accuracy | ±2°C |
| Temperature Resolution | 1°C |
| Humidity Range | 20%–90% RH |
| Humidity Accuracy | ±5% RH |
| Humidity Resolution | 1% RH |
| Interface | Digital single-bus (DHT11 protocol) |
| Recommended Read Interval | At least 2 seconds |
| Module Pinout | Check the supplied board markings; breakout layouts may vary |
Compatible Devices and Controllers
- Arduino Uno, Nano and other compatible Arduino boards
- ESP32 and ESP8266 development boards with suitable 3.3V logic connections
- Raspberry Pi GPIO projects using a compatible DHT11 software interface
- Other microcontrollers that support the DHT11 single-bus timing protocol
Applications
- DIY digital thermometers and humidity monitors
- Arduino weather station projects
- Indoor room-condition monitoring
- Greenhouse and plant-growing experiments
- Basic smart-home and IoT prototypes
- STEM learning and environmental sensing demonstrations
Connection and Setup Guide
- Identify the VCC, DATA and GND labels on your supplied module. Do not rely on pin position alone because board layouts can differ.
- Connect VCC to a supported 3.3V or 5V supply and GND to the controller ground.
- Connect DATA to a suitable digital GPIO pin on your controller.
- Check whether the breakout board includes a DATA pull-up resistor. If not, add a suitable pull-up resistor between DATA and VCC as required by the sensor circuit.
- Install a compatible DHT library and select the DHT11 sensor type in your code.
- Allow the sensor to initialise and request readings no more frequently than once every 2 seconds.
Important Before Buying
- DHT11 is an entry-level sensor with modest accuracy. It is not intended for precision laboratory, medical or industrial measurement.
- The standard DHT11 sensing range is 0°C to 50°C and 20% to 90% RH. Do not confuse it with the wider range of other DHT models.
- Allow at least 2 seconds between measurement requests; faster polling may return stale or unreliable readings.
- Keep the sensing element away from direct water, condensation, heat sources and strong airflow that could distort readings.
- Check the module’s pin labels and whether a pull-up resistor is already fitted before wiring.
- The exact breakout-board layout, dimensions and included accessories are not confirmed for this listing.
Frequently Asked Questions
What does the DHT11 sensor measure?
It measures ambient temperature and relative humidity, then sends the readings digitally to a compatible microcontroller.
What is the temperature range of DHT11?
The standard DHT11 temperature range is 0°C to 50°C, with a typical stated accuracy of ±2°C.
What humidity range can it measure?
The standard DHT11 relative humidity range is approximately 20% to 90% RH, with a typical stated accuracy of ±5% RH.
Can I use DHT11 with Arduino Uno?
Yes. Connect its data pin to a digital input, provide the correct supply and ground, and use a DHT11-compatible Arduino library.
Can it work with ESP32 or ESP8266?
Yes, with a suitable GPIO connection and correct logic-level wiring. Check the breakout circuit and keep the data signal within the controller’s permitted voltage range.
How often should I read the sensor?
Allow at least 2 seconds between readings. The DHT11 is not designed for rapid, continuous high-frequency sampling.
Does the DHT11 provide analogue output?
No. It uses a digital single-bus interface. Temperature and humidity values are transmitted as digital data over the DATA line.
Is DHT11 suitable for accurate weather or industrial monitoring?
It is suitable for basic learning and general-purpose prototypes, but its limited range and accuracy make it unsuitable for precision or demanding industrial monitoring.
Why Buy from PcGuy Computers?
- Pakistan-based ordering and customer support
- Product information to help select compatible electronics components
- Assistance with basic product and project queries
- Convenient online ordering through PcGuy Computers
Buy DHT11 Temperature Humidity Sensor Module in Pakistan
Order the DHT11 Temperature Humidity Sensor Module from PcGuy Computers for Arduino, ESP32, weather station and environmental monitoring projects. It is a practical entry-level sensor for learning digital temperature and humidity measurement.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.