Keyestudio RJ11 Capacitive Touch Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the Keyestudio RJ11 Capacitive Touch Sensor Module in Pakistan for touch-based digital input in compatible EASY Plug electronics projects. It detects finger or conductive touch without a mechanical button.

  • Brand: Keyestudio
  • Model: KS0113
  • Sensor Type: Capacitive Touch
  • Output: Digital HIGH/LOW
  • Operating Voltage: 3.3V–5V DC
  • Connector: RJ11 6P6C EASY Plug
  • Dimensions: 45 × 20 × 18mm
  • Weight: Approx. 4.9g
  • Use: Touch switches, Arduino learning and interactive projects

₨1,760.00

15 in stock

15 in stock

Description

The Keyestudio RJ11 Capacitive Touch Sensor Module is a digital touch-input module for adding button-free interaction to compatible Keyestudio EASY Plug electronics projects. It detects a finger or conductive touch through capacitive sensing and sends a HIGH/LOW signal to the control board, making it useful for interactive displays, touch switches, STEM learning and DIY automation.

Key Features

Capacitive Touch Detection

Detects touch without requiring a traditional mechanical push button.

Digital Output

Provides a HIGH/LOW logic signal that a compatible controller can read as a touch input.

3.3V–5V Operation

Designed for a low-voltage electronics setup within the manufacturer’s specified supply range.

EASY Plug RJ11 Interface

Uses an RJ11 6P6C connector for connection to compatible Keyestudio EASY Plug control boards.

Touch Through Thin Materials

Can detect touch through some cloth or paper; sensitivity decreases as the insulating layer becomes thicker.

Compact Form Factor

A small sensor board for educational experiments and embedded interactive projects.

Technical Specifications

Brand Keyestudio
Module Type EASY Plug capacitive touch sensor
Model / Documentation KS0113
Detection Technology Capacitive sensing
Output Digital HIGH/LOW signal
Operating Voltage 3.3V–5V DC
Connector RJ11 6P6C EASY Plug
Dimensions 45 × 20 × 18mm
Weight Approximately 4.9g

Compatible Devices and Controllers

  • Keyestudio EASY Plug control boards with an RJ11 6P6C sensor interface.
  • Arduino-based projects when used through a compatible Keyestudio EASY Plug control board.
  • Other microcontrollers only when the connector pinout, supply voltage and digital signal connection have been independently confirmed and correctly adapted.

Applications

  • Touch-activated switches and interactive controls.
  • Arduino and STEM classroom experiments.
  • Touch-controlled LEDs and simple electronic demonstrations.
  • DIY interactive panels and creative prototypes.
  • Basic touch input for compatible automation projects.

Connection and Setup Guide

  1. Connect the module to a compatible Keyestudio EASY Plug control board using the correct RJ11 6P6C cable.
  2. Connect the control board to your computer and provide the required power.
  3. In your sketch, configure the controller’s corresponding digital input pin as INPUT.
  4. Read the digital input with digitalRead() and use the HIGH/LOW state to control an LED or another suitable output.
  5. Test the touch area and adjust your project design if an insulating cover is used.

Important Before Buying

  • Check the connector pinout: An RJ11 plug fitting physically does not guarantee electrical compatibility. Keyestudio specifies this sensor for its own EASY Plug control boards; other brands may use a different internal wire sequence.
  • Controller/cable: The product listing is for the sensor module. Do not assume a control board or RJ11 cable is included unless separately stated in the order details.
  • Touch sensitivity: Detection through cloth or paper is possible, but thicker insulating material can reduce sensitivity.
  • Voltage: Keep the supply within 3.3V–5V DC and confirm the controller’s input requirements before connecting.

Frequently Asked Questions

What does the Keyestudio RJ11 Capacitive Touch Sensor do?

It detects a finger or conductive touch using capacitance and provides a digital signal that a compatible controller can read.

Does this module need a physical button press?

No. It detects touch electronically, so it can be used to create button-free input controls.

What is its operating voltage?

The manufacturer’s KS0113 documentation specifies a 3.3V to 5V DC supply.

Can I connect it directly to any RJ11 port?

No. RJ11 describes the connector shape, not a universal pinout. Keyestudio warns that other brands may wire their RJ11 ports differently.

Is it compatible with Arduino Uno?

It can be used in an Arduino project through a compatible Keyestudio EASY Plug control board. Do not connect it to an unrelated RJ11 port without confirming the electrical pin mapping.

Can it sense touch through paper or cloth?

Yes, the manufacturer describes detection through some cloth and paper. Sensitivity decreases as the material becomes thicker.

Does it provide an analogue output?

No. This KS0113 EASY Plug version is documented as a digital sensor that outputs HIGH/LOW logic levels.

Is the control board or RJ11 cable included?

This listing is for the sensor module. Check the order contents or contact PcGuy Computers to confirm whether any cable or controller is supplied separately.

Why Buy from PcGuy Computers?

  • Shop electronics and STEM components from one place.
  • Product information focused on practical compatibility and setup.
  • Local order assistance for customers in Pakistan.
  • Support with product selection before you place an order.

Buy Keyestudio RJ11 Capacitive Touch Sensor Module in Pakistan

Order the Keyestudio RJ11 Capacitive Touch Sensor Module from PcGuy Computers for touch-controlled Arduino learning, interactive electronics and compatible EASY Plug projects. Check your controller’s RJ11 pinout before purchasing to ensure a correct connection.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio RJ11 Capacitive Touch Sensor Module”

Your email address will not be published. Required fields are marked *