Keyestudio APDS-9930 Altitude Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Keyestudio APDS-9930 Module is a digital ambient light and infrared proximity sensor for detecting brightness and nearby objects. Its I²C interface makes it suitable for compatible Arduino, robotics, automation and STEM electronics projects. Note: despite the store listing name, it does not measure altitude.
- Reference Module: KS0267 (verify PCB marking)
- Sensor IC: APDS-9930
- Functions: Ambient Light + IR Proximity Detection
- Light Sensitivity: Approximately 0.01 lux
- Proximity Range: Up to approximately 100mm
- Communication: I²C, up to 400kHz
- I²C Address: 0x39 (7-bit)
- Working Voltage: 3.3V–3.8V (KS0267 documentation)
- Additional Feature: Programmable interrupt output
- Applications: Smart Lighting, Proximity Alerts, Automation and Robotics
₨1,540.00
9 in stock
9 in stock
Description
The Keyestudio APDS-9930 Altitude Sensor Module is actually an ambient light and infrared proximity sensor module, not an altitude sensor. Built around the APDS-9930 optical sensor, it detects surrounding light levels and nearby objects without physical contact. Its I²C interface makes it useful for Arduino-compatible projects, smart lighting, automatic display control, proximity alerts and interactive electronics.
Key Features
Ambient Light Sensing
Measures surrounding light, including low-light levels down to approximately 0.01 lux.
Proximity Detection
Detects nearby objects at distances up to approximately 100mm under suitable conditions.
I²C Interface
Communicates with a compatible controller using the I²C bus at up to 400kHz.
16-Bit Resolution
Supports up to 16-bit ambient-light data resolution.
Interrupt Support
Programmable upper and lower thresholds can trigger an interrupt when conditions change.
Low-Power Modes
Includes configurable wait and sleep modes for low-power sensing applications.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Reference Module | KS0267 (verify PCB marking) |
| Sensor IC | APDS-9930 |
| Sensor Type | Digital ambient light and infrared proximity sensor |
| Light Sensitivity | Down to approximately 0.01 lux |
| Ambient Light Resolution | Up to 16-bit |
| Proximity Detection | Up to approximately 100mm |
| Communication | I²C, up to 400kHz |
| Typical I²C Address | 0x39 (7-bit) |
| Module Working Voltage | DC 3.3V–3.8V (Keyestudio KS0267 documentation) |
| Output | Digital sensor data over I²C |
| Interrupt | Dedicated INT pin |
| Operating Temperature | -40°C to +85°C (Keyestudio module documentation) |
Applications and Project Ideas
- Automatic screen control: Detect nearby objects to trigger display dimming or screen-off actions.
- Smart lighting: Adjust lighting behavior according to ambient brightness.
- Proximity alerts: Trigger an LED, buzzer or notification when an object approaches.
- Interactive electronics: Build touch-free controls and presence-responsive prototypes.
- Robotics: Add short-range object proximity detection to suitable robot projects.
- STEM learning: Explore optical sensing, I²C communication and programmable interrupts.
Wiring and Setup
The Keyestudio KS0267 documentation shows a six-pin connection header. Check the printed labels on your actual board before wiring.
| Module Pin | Connection / Function |
|---|---|
| 3.3V / VCC | 3.3V-compatible supply |
| GND | Ground |
| SDA | I²C data |
| SCL | I²C clock |
| INT | Optional interrupt signal to a suitable digital input |
- Power the documented KS0267 module within its 3.3V–3.8V working range.
- Connect SDA and SCL to the matching I²C pins on your controller.
- Connect INT only if your project uses interrupt notifications.
- Use a compatible APDS-9930 library or I²C driver to read ambient-light and proximity data.
- Do not connect the module directly to 5V logic or assume it is 5V tolerant. Use suitable level shifting where required.
Important Product Clarification
Although this store listing uses the name “Altitude Sensor Module,” the APDS-9930 does not measure altitude, atmospheric pressure or elevation. It is an ambient light and proximity sensor. Its proximity range is specified up to approximately 100mm; actual performance can depend on target material, surface, lighting and installation.
Frequently Asked Questions
Is the APDS-9930 an altitude sensor?
No. APDS-9930 is a digital ambient light and infrared proximity sensor. It does not measure altitude or atmospheric pressure.
What does this module detect?
It measures ambient light and detects nearby objects using an infrared proximity system.
What is its maximum proximity range?
The sensor is specified for proximity detection up to approximately 100mm. Real-world results depend on the target and environment.
Does it use I²C communication?
Yes. It uses an I²C interface supporting speeds up to 400kHz. The commonly used 7-bit address is 0x39.
What voltage does the Keyestudio module require?
Keyestudio specifies a 3.3V–3.8V working supply for the KS0267 module. Do not assume it is compatible with direct 5V logic.
Can I use it with Arduino?
It can be used with a compatible Arduino setup through I²C. Ensure the supply and signal levels are suitable; a 5V Arduino may require level shifting.
What is the INT pin used for?
The INT pin can signal programmable threshold events, allowing a controller to respond when light or proximity conditions meet configured limits.
Can it work in low-light conditions?
Yes. The ambient light sensing system is designed for low-light measurements, with sensitivity down to approximately 0.01 lux.
Why Buy from PcGuy Computers?
PcGuy Computers provides product information and assistance to help customers select suitable electronics and STEM development modules. Confirm the exact board revision, package contents and applicable warranty terms with the store before ordering.
Keyestudio APDS-9930 Sensor Module – Summary
The Keyestudio APDS-9930 is a compact I²C ambient light and proximity sensor for smart lighting, object detection, automation and interactive electronics projects. It offers low-light sensing, proximity detection up to approximately 100mm and programmable interrupt support. Remember to use a compatible 3.3V-level setup.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.