Keyestudio ATmega 32U4P PRO MICRO Development Board
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Keyestudio ATmega32U4 Pro Micro is a compact 5V / 16MHz Arduino-compatible development board with native USB, making it suitable for custom keyboards, macro pads, USB HID controllers, robotics and embedded projects.
- Microcontroller: ATmega32U4
- Operating Voltage: 5V
- Clock Speed: 16MHz
- Digital I/O: 12
- PWM Outputs: 5
- Analogue Inputs: 4
- Flash / SRAM / EEPROM: 32KB / 2.5KB / 1KB
- USB Connector: Micro USB (native USB)
- Interfaces: USB, UART, I2C and SPI
₨3,300.00
9 in stock
9 in stock
Description
The Keyestudio ATmega32U4 Pro Micro Development Board is a compact 5V / 16MHz Arduino-compatible controller built around the ATmega32U4 microcontroller. Its native USB interface makes it especially useful for custom keyboards, macro pads, USB HID controllers, robotics and embedded electronics projects where board size matters.
Key Features
ATmega32U4 with Native USB
The microcontroller includes USB functionality, allowing compatible firmware to communicate directly with a computer without a separate USB-to-serial converter for normal USB operation.
USB HID Projects
Program it for compatible keyboard, mouse and other USB input-device applications, including shortcut keypads and custom controllers.
Compact Pro Micro Format
A small development-board footprint suited to custom keyboards, handheld devices, compact enclosures and permanently installed embedded projects.
5V / 16MHz Operation
This is the 5V / 16MHz version, not the 3.3V / 8MHz variant. Select peripherals and logic levels accordingly.
GPIO, PWM & Analogue Inputs
Provides 12 digital I/O connections, 5 PWM outputs and 4 analogue inputs for compatible buttons, sensors, LEDs and control interfaces.
Multiple Communication Options
Supports native USB, hardware UART, I2C and SPI for connecting compatible modules, displays and peripherals.
ATmega32U4 Native USB and HID Capability
The ATmega32U4 has an integrated USB peripheral. With suitable firmware, the board can identify itself to a connected computer as a compatible USB Human Interface Device (HID), such as a keyboard or mouse. This is why Pro Micro boards are frequently used in custom input devices and macro-pad builds.
USB HID behaviour depends on the firmware and host operating system. During development, consider adding a startup delay or physical enable control so unintended keyboard or mouse commands are not sent to the computer.
Suitable Projects and Applications
- Custom mechanical keyboards and macro pads
- Shortcut keypads and stream control panels
- USB button boxes and media controllers
- Sim racing and flight simulator controls
- USB keyboard and mouse emulation
- Robotics, sensor interfaces and small automation projects
- Wearable, handheld and embedded electronics
- STEM learning and Arduino-compatible prototyping
Programming with Arduino IDE
The board can be programmed through the Arduino development environment after selecting suitable ATmega32U4 / Pro Micro board support. Its USB serial interface and hardware UART are distinct: in typical ATmega32U4 Arduino environments, Serial refers to native USB serial while Serial1 accesses the hardware UART. Existing UNO sketches that use serial hardware may need adjustments.
Digital, Analogue and Communication Interfaces
The board offers 12 digital I/O connections for compatible switches, buttons, LEDs and sensors, along with 5 PWM outputs and 4 analogue inputs. I2C and SPI are also supported. Always consult the board pinout for the actual SDA, SCL, SPI and UART pin locations rather than assuming Arduino UNO pin assignments.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Board Type | Pro Micro Development Board |
| Microcontroller | ATmega32U4 (8-bit AVR) |
| Operating Voltage | 5V |
| Clock Speed | 16MHz |
| Digital I/O | 12 |
| PWM Outputs | 5 |
| Analogue Inputs | 4 dedicated analogue inputs |
| Flash Memory | 32KB (part of program memory is used by the bootloader) |
| SRAM | 2.5KB |
| EEPROM | 1KB |
| USB Interface | Native ATmega32U4 USB |
| USB Connector | Micro USB |
| Communication | USB, hardware UART, I2C and SPI |
| Programming | Arduino IDE with compatible ATmega32U4 / Pro Micro board support |
| Typical Applications | USB HID, keyboards, macro pads, robotics, automation and embedded electronics |
Pro Micro vs Arduino UNO, Leonardo and Pro Mini
Compared with Arduino UNO: a traditional UNO R3 uses an ATmega328P and a separate USB interface, while this Pro Micro uses an ATmega32U4 with native USB in a smaller form factor. UNO boards may be more convenient for standard shields and general bench prototyping.
Compared with Leonardo: both use the ATmega32U4 and support native USB, but the Pro Micro is smaller and has a different pin layout and fewer accessible board-level connections.
Compared with Pro Mini: conventional Pro Mini boards generally use an ATmega328P and do not provide the same native USB capability. The Pro Micro is the more suitable choice when native USB HID functionality is required.
Important Compatibility and Usage Notes
- 5V logic: this is the 5V / 16MHz model. Do not connect 3.3V-only peripherals directly to 5V signals unless their specifications permit it; use suitable level shifting where required.
- GPIO limits: do not power motors, pumps, solenoids, large relays or other significant loads directly from GPIO pins. Use an appropriately rated driver and power supply.
- Pin mapping: check the Keyestudio Pro Micro pinout for I2C, SPI and UART connections.
- USB HID firmware: test keyboard or mouse emulation carefully to avoid unintended input commands during development.
- Programming: select the matching Pro Micro / ATmega32U4 board definition and settings in your development environment.
What’s Included?
- 1 × Keyestudio ATmega32U4 Pro Micro Development Board
USB cable, headers, sensors, modules and other project hardware are not listed as included; check the supplied package contents before ordering if you need these accessories.
Frequently Asked Questions
Which microcontroller does this Pro Micro use?
It uses the ATmega32U4 8-bit AVR microcontroller, which has integrated native USB functionality.
Is this the 5V or 3.3V version?
This listing is for the 5V / 16MHz version. Pro Micro-style boards are also available in 3.3V / 8MHz variants.
Can I use it as a USB keyboard?
Yes. With suitable firmware, the ATmega32U4 can act as a USB keyboard or another compatible HID input device.
Can it emulate a USB mouse?
Yes. Appropriate firmware can use its native USB interface for compatible mouse-emulation projects.
Is it suitable for custom keyboards and macro pads?
Yes. Its compact size and native USB HID capability make it a popular controller option for custom keyboards, macro pads and button boxes.
Which USB connector does it use?
The board uses a Micro USB connector for programming, communication and compatible USB power.
Does it need a separate USB-to-TTL adapter?
Normally no. The ATmega32U4 has native USB, so the board can generally be programmed through its onboard USB connection with the correct board support.
Can I program it with the Arduino IDE?
Yes. Install or select compatible ATmega32U4 / Pro Micro board support and choose the correct board settings.
Does it support I2C and SPI?
Yes. Both interfaces are supported. Use the board pinout for the correct pin assignments instead of assuming UNO mappings.
Does it have a hardware UART?
Yes. In typical ATmega32U4 Arduino environments, Serial is the native USB serial connection and Serial1 is the hardware UART.
Can it directly power a motor or pump?
No. Use a suitably rated external motor driver, MOSFET, transistor or relay interface and an appropriate power supply. GPIO pins are for logic-level signals.
Is the Pro Micro the same as the Pro Mini or Leonardo?
No. Pro Micro and Leonardo both use the ATmega32U4 with native USB but differ in physical layout. Conventional Pro Mini boards generally use ATmega328P and do not have the same native USB capability.
Why Buy from PcGuy Computers?
| Pakistan-focused support | Product guidance for customers and electronics projects in Pakistan. |
|---|---|
| Pakistan-wide shipping options | Shipping options are available subject to destination and service coverage. |
| Related project components | Explore Arduino-compatible boards, sensors, modules, relays and other electronics components. |
| Practical product guidance | Useful product information to help plan compatible prototyping and embedded projects. |
Buy the Keyestudio ATmega32U4 Pro Micro Development Board from PcGuy Computers in Pakistan for compact Arduino-compatible development, native USB HID projects, custom keyboards, macro pads and embedded electronics.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.