1203B PWM Brush DC Motor Speed Controller Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the 1203B PWM Brush DC Motor Speed Controller Module in Pakistan for manual speed adjustment of compatible brushed DC motors. Its rotary potentiometer provides PWM control for suitable robotics, fan, pump and DIY motor projects.
- Model: 1203B
- Input Voltage: 6V–28V DC
- Maximum Continuous Current: 3A (supplier-specified)
- Maximum Power: Up to 80W under suitable conditions
- Control Method: PWM (Pulse Width Modulation)
- Speed Adjustment: Rotary potentiometer
- Motor Compatibility: Brushed DC motors
- Applications: Robotics, compatible fans, pumps and DIY electronics
₨2,200.00
6 in stock
6 in stock
Description
The 1203B PWM Brush DC Motor Speed Controller Module is a manual speed regulator for compatible brushed DC motors. It accepts a 6V–28V DC supply and uses an adjustable rotary potentiometer to vary motor output through pulse-width modulation (PWM). With a supplier-specified maximum continuous current of 3A and maximum power rating of up to 80W under suitable conditions, it is useful for small robotics, fans, pumps and DIY motor-control projects.
Key Features
Adjusts the motor’s average power by changing the PWM duty cycle, rather than using a simple series resistor.
Designed for compatible DC supplies from 6V to 28V, subject to the motor and controller ratings.
Supplier-specified maximum continuous output current is 3A. Actual usable current depends on load, wiring and cooling.
Use the onboard knob to manually increase or reduce the speed of a connected brushed DC motor.
Separate input-power and motor-output terminals make connecting compatible DC wiring straightforward.
Suitable for hobby motor systems, educational demonstrations and low-voltage DIY automation.
Technical Specifications
| Model | 1203B |
|---|---|
| Module Type | PWM brushed DC motor speed controller |
| Input Voltage | 6V–28V DC |
| Maximum Continuous Output Current | 3A (supplier-specified) |
| Maximum Output Power | Up to 80W under suitable operating conditions |
| Control Method | Pulse Width Modulation (PWM) |
| Speed Adjustment | Onboard rotary potentiometer |
| Load Type | Compatible brushed DC motors |
| Connections | DC input and motor output screw terminals |
Compatible Motors and Devices
- Two-wire brushed DC motors rated within the controller’s 6V–28V input and current limits
- Compatible low-voltage DC fans and small pumps
- Brushed DC motors used in robotics and model projects
- Other suitable DC loads only when their electrical characteristics are compatible with PWM switching
Check the motor’s rated voltage and startup or stall current before connecting it. A motor that draws less than 3A while running may briefly demand much more current at startup or when mechanically stalled.
Applications
- Manual speed adjustment in small robot and DIY vehicle projects
- Brushed DC fan speed control
- Compatible small DC pump control
- Educational PWM and motor-control experiments
- Low-voltage automation and hobby equipment
Connection and Setup Guide
- Disconnect the DC power supply before making any connections.
- Identify the board’s input terminals, usually marked POWER+ and POWER−, and connect a correctly rated 6V–28V DC supply with the correct polarity.
- Connect the brushed DC motor to the motor-output terminals, usually marked MOTOR+ and MOTOR−.
- Check every connection, confirm that the motor voltage matches the supply, and make sure the motor’s startup/stall current is within the controller’s limits.
- Apply DC power and turn the potentiometer gradually to adjust motor speed.
- Disconnect power before changing wiring or swapping the motor leads to reverse rotation, if the motor and application allow it.
Important Before Buying
- DC only: Never connect this module directly to 110V/230V AC mains.
- Brushed motors only: It is not a controller for three-phase brushless motors, stepper motors or RC servo signal inputs.
- Current limit: Do not exceed the 3A supplier-specified continuous rating. Startup and stall current matter, not just normal running current.
- Power rating: The stated 80W maximum is not available at every input voltage; usable power is constrained by the 3A current limit and thermal conditions.
- Motor voltage: The controller does not automatically protect a lower-voltage motor from an excessive supply voltage.
- Polarity: Confirm input positive and negative markings carefully. Reverse input polarity can damage the board.
- Heat and protection: Provide ventilation, use suitable wiring and consider an appropriately rated supply-side fuse. Stop operation if the board becomes excessively hot.
- Variant differences: Terminal labels, potentiometer details and the effective minimum duty cycle may vary between production versions. Follow the markings on the supplied board.
Frequently Asked Questions
What does the 1203B PWM motor controller do?
It adjusts the speed of a compatible brushed DC motor by changing the PWM duty cycle using its rotary potentiometer.
What input voltage does this module support?
The specified DC input range is 6V to 28V. Use a supply that also matches your motor’s rated voltage.
What is the maximum current rating?
The supplier-specified maximum continuous output current is 3A. Motor startup and stall current must also remain within the controller’s limits.
Can I use it with a brushless DC motor?
No. This 1203B module is intended for compatible brushed DC motors. Brushless motors require a suitable electronic speed controller.
Can I control a DC fan or pump?
It may be used with a compatible brushed DC fan or pump if its voltage and current requirements are within the module’s ratings. Check the load specifications first.
Does it control motor direction?
The standard speed adjustment is provided by the potentiometer; do not assume the board has a direction switch. On a compatible brushed motor, direction can generally be changed by swapping the motor leads with all power disconnected.
Can I connect it to an Arduino?
The module controls the motor through its power terminals and potentiometer; it is not an Arduino logic-signal motor driver interface. Do not connect motor supply voltage to Arduino I/O pins.
Can I use it with a 230V AC supply?
No. The module requires a low-voltage DC input between 6V and 28V. Never connect it directly to AC mains.
Why Buy from PcGuy Computers?
- Practical electronics and STEM project components
- Product information to help you check compatibility before ordering
- Local Pakistan ordering and customer assistance
- Support for Arduino, robotics and DIY electronics projects
Buy 1203B PWM Brush DC Motor Speed Controller Module in Pakistan
Order the 1203B PWM Brush DC Motor Speed Controller Module from PcGuy Computers for compatible brushed DC motor speed-control projects. Check your motor voltage and current requirements before purchase to ensure a suitable match.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.