Keyestudio RJ11 DS18B20 Temperature Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Keyestudio RJ11 DS18B20 Temperature Sensor Module provides digital temperature measurement for Arduino and compatible Keyestudio EASY Plug projects. It uses 1-Wire communication, programmable 9–12-bit resolution and an RJ11-style EASY Plug connector for compatible hardware.

  • Brand: Keyestudio
  • Sensor: DS18B20 digital temperature sensor
  • Measurement: Temperature only
  • Sensor Range: -55°C to +125°C
  • Accuracy: Approx. ±0.5°C from -10°C to +85°C
  • Resolution: Programmable 9, 10, 11 or 12 bits
  • Communication: 1-Wire digital
  • Connector: Keyestudio RJ11-style EASY Plug
  • Applications: Temperature monitoring, automation, data logging and STEM projects

Note: This is an exposed PCB module, not waterproof. It does not measure humidity. Confirm EASY Plug/controller compatibility before connecting.

₨1,760.00

6 in stock

6 in stock

Description

The Keyestudio RJ11 DS18B20 Temperature Sensor Module is a digital temperature sensor module for Arduino, Keyestudio EASY Plug systems and compatible microcontroller projects. It uses the DS18B20 sensor and 1-Wire communication to measure temperature, with programmable 9–12-bit resolution and a convenient RJ11-style EASY Plug connector for compatible hardware.

Use it for room and enclosure monitoring, digital thermometers, temperature data logging, greenhouse projects and microcontroller-based automation. This is an exposed PCB sensor module, not a waterproof probe.

Key Features

DS18B20 Digital Sensor

Measures temperature internally and sends digital readings to a compatible controller.

Wide Sensing Range

The DS18B20 sensing element supports measurements from -55°C to +125°C.

±0.5°C Accuracy

Specified accuracy is approximately ±0.5°C from -10°C to +85°C.

Selectable Resolution

Configure temperature conversion at 9, 10, 11 or 12 bits to balance resolution and conversion time.

1-Wire Communication

Uses a single primary data signal alongside power and ground connections.

EASY Plug Connector

RJ11-style connection makes wiring convenient with compatible Keyestudio EASY Plug boards.

DS18B20 Digital Temperature Measurement

The DS18B20 performs temperature sensing and conversion internally, then sends the measured value digitally over its 1-Wire interface. Unlike an analogue temperature sensor, the controller does not need to calculate temperature from an analogue output voltage.

The sensing element supports a range of approximately -55°C to +125°C. Its specified accuracy is approximately ±0.5°C between -10°C and +85°C; accuracy outside that range differs. These are sensor specifications and should not automatically be treated as the environmental rating of the complete assembled module.

Programmable 9–12-Bit Resolution

The sensor supports 9-bit, 10-bit, 11-bit and 12-bit temperature conversion. Higher resolution provides finer measurement increments but takes longer to complete a conversion. Your project software can select the setting that best fits its update-rate and measurement needs.

1-Wire Communication & Multiple Sensors

The DS18B20 uses the 1-Wire digital protocol. Each genuine DS18B20 has a unique 64-bit serial identifier, allowing software to distinguish multiple sensors on a correctly configured shared data bus.

Multi-sensor installations require suitable wiring, pull-up arrangements, device addressing and compatible software. Check the module’s pinout and electrical requirements before connecting it to your controller.

Keyestudio RJ11-Style EASY Plug Interface

The module uses Keyestudio’s RJ11-style EASY Plug connector for convenient connection to compatible EASY Plug controllers and expansion boards. The connector is an electronics interface; it is not intended as a telephone or Ethernet connection. Do not assume it can be plugged into an ordinary network or telephone socket.

Practical Project Applications

  • Arduino digital thermometers with LCD or OLED displays
  • Indoor room, cabinet and electronics enclosure monitoring
  • Greenhouse and workshop temperature projects
  • Temperature data logging with MicroSD storage
  • Temperature alarms and home automation prototypes
  • Cooling fan and heating control experiments

A microcontroller can use the sensor reading to control external equipment. The module itself only measures temperature; fans, heaters and pumps require a suitably rated relay, MOSFET, transistor or other driver. Safety-critical systems need independent protection and certified control hardware.

Important: This Module Is Not Waterproof

This product is an exposed PCB-mounted DS18B20 module. It is not a sealed stainless-steel waterproof probe and should not be submerged or exposed directly to liquids. For direct water or liquid-temperature measurement, choose a suitably constructed waterproof DS18B20 probe designed for that environment.

Temperature Only – No Humidity Measurement

The DS18B20 measures temperature only; it does not measure relative humidity. If your project needs both temperature and humidity, add a separate humidity sensor or choose a suitable combined temperature/humidity module such as a compatible DHT-series device.

Technical Specifications

Brand Keyestudio
Product Type Digital Temperature Sensor Module
Sensor DS18B20
Measurement Temperature only
Sensor Measurement Range -55°C to +125°C
Specified Accuracy Approx. ±0.5°C from -10°C to +85°C
Resolution Programmable 9, 10, 11 or 12 bits
Communication 1-Wire digital
Sensor Addressing Unique 64-bit device serial code
Connector Keyestudio RJ11-style EASY Plug interface
Humidity Measurement No
Waterproof Rating Not waterproof; exposed PCB module
Applications Temperature monitoring, automation, data logging, STEM and DIY electronics

DS18B20 vs Analogue Temperature Sensors

The DS18B20 sends a digital temperature value over 1-Wire. Analogue sensors such as the LM35 output a voltage that the controller measures through its analogue-to-digital converter. Digital output can simplify temperature conversion in software, while the best choice depends on the controller, wiring and project requirements.

DS18B20 vs DHT11

The DS18B20 is designed for digital temperature measurement only. The DHT11 measures both temperature and humidity, but is intended for basic environmental monitoring. Choose a DS18B20 when temperature is the main requirement; add a separate humidity sensor when relative humidity is needed.

RJ11 Module vs Waterproof DS18B20 Probe

Both can use DS18B20 sensing technology, but their physical construction differs. This Keyestudio module has an exposed board-mounted sensor for electronics projects. A waterproof probe encloses the sensing element in a sealed assembly intended for suitable damp or liquid measurement applications. Select the construction appropriate to the environment.

Sensor Placement Tips

For representative ambient readings, position the module away from processors, voltage regulators, power supplies, motors and other heat sources. Direct sunlight and restricted airflow can also affect readings. The sensor should be placed where it can experience the temperature you actually want to measure.

Package Contents

  • 1 × Keyestudio RJ11 DS18B20 Temperature Sensor Module

Controller board, EASY Plug cable, display, power supply and other project hardware are not confirmed as included unless specifically listed with the supplied package.

Frequently Asked Questions

What does the DS18B20 measure?

It measures temperature and sends the result digitally to a compatible microcontroller.

What is the DS18B20 temperature range?

The DS18B20 sensing element supports approximately -55°C to +125°C. The complete module’s usable environmental range may depend on its other components.

How accurate is this temperature sensor?

The DS18B20 is specified for approximately ±0.5°C accuracy between -10°C and +85°C. Accuracy outside this range differs.

What resolution does it support?

It supports programmable 9-bit, 10-bit, 11-bit and 12-bit temperature conversion.

Which communication protocol does it use?

The DS18B20 uses the 1-Wire digital communication protocol.

Can multiple DS18B20 sensors share one data line?

Yes. Each sensor has a unique device identifier, so multiple compatible sensors can share a correctly designed 1-Wire bus with suitable wiring and software addressing.

What is the RJ11 connector for?

It is Keyestudio’s RJ11-style EASY Plug electronics interface for compatible controllers and expansion boards. It is not a telephone or Ethernet connection.

Is this module waterproof?

No. It has an exposed PCB-mounted sensor and should not be submerged. Choose a properly sealed waterproof DS18B20 probe for liquid-temperature applications.

Can it measure water temperature?

Do not submerge this exposed module. Use a suitably constructed waterproof temperature probe designed for the intended liquid and environment.

Does it measure humidity?

No. The DS18B20 measures temperature only. A separate humidity sensor is needed for relative humidity measurements.

Can I use it in a thermostat project?

Yes. A microcontroller can use its readings in a thermostat prototype. External loads need suitable switching hardware, and safety-critical applications require independent protection.

Can it directly control a fan or heater?

No. It only measures temperature. A controller must operate an appropriately rated relay, MOSFET or other driver for the load.

Why Buy from PcGuy Computers?

Pakistan-focused support Product and project guidance for customers in Pakistan.
Pakistan-wide shipping options Delivery options can be selected according to destination and service availability.
Related electronics range Explore Arduino-compatible boards, Keyestudio modules, sensors and project components.
Practical product guidance Clear product information to help check connector, sensor and project compatibility.

PcGuy Computers offers electronics modules and components for Arduino projects, STEM learning, robotics, monitoring and automation across Pakistan.

Buy the Keyestudio RJ11 DS18B20 Temperature Sensor Module in Pakistan for digital temperature measurement, Arduino monitoring, data logging and compatible EASY Plug projects.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio RJ11 DS18B20 Temperature Sensor Module”

Your email address will not be published. Required fields are marked *