DS1302 CR2032 Electronic Clock Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the DS1302 CR2032 Electronic Clock Module in Pakistan for Arduino clocks, data logging and timed automation. This real-time clock module uses a simple 3-wire serial interface and supports backup timekeeping with a compatible CR2032 cell.
- RTC Chip: DS1302
- Module Type: Real-Time Clock (RTC)
- Communication: 3-wire serial (CE/RST, I/O, SCLK)
- IC Operating Voltage: 2.0V–5.5V (module limits may vary)
- Backup Battery: CR2032 format
- Timekeeping: Seconds, minutes, hours, date, month and year
- Time Format: 12-hour / 24-hour
- Backup RAM: 31 bytes
- Crystal: 32.768kHz
- Compatibility: Arduino and compatible microcontrollers
₨1,540.00
17 in stock
17 in stock
Description
The DS1302 CR2032 Electronic Clock Module is a real-time clock (RTC) board that keeps track of seconds, minutes, hours, day, date, month and year for microcontroller projects. Its three-wire serial interface makes it suitable for Arduino clocks, data loggers, scheduled automation and embedded systems. A backup coin-cell supply can help preserve time when main power is removed.
Key Features
Maintains calendar and time information, including seconds, minutes, hours, date, month and year.
Provides a backup power connection to help retain timekeeping while the main board supply is off. Battery inclusion should be checked.
Communicates with a controller using CE/RST, I/O data and SCLK serial clock signals.
Supports both 12-hour and 24-hour clock formats, including AM/PM indication in 12-hour mode.
Automatically handles month lengths and leap-year compensation through the year 2100.
The DS1302 chip includes 31 bytes of battery-backed general-purpose RAM for small data storage tasks.
Technical Specifications
| Module Type | Real-Time Clock (RTC) module |
|---|---|
| RTC Chip | DS1302 |
| Timekeeping | Seconds, minutes, hours, day, date, month and year |
| Calendar | Leap-year compensation up to 2100 |
| Communication | 3-wire synchronous serial interface (CE/RST, I/O, SCLK) |
| IC Operating Voltage | 2.0V–5.5V (DS1302 chip specification); module-level limits depend on board design |
| Backup Battery Format | CR2032 coin-cell holder, as indicated by product name |
| Backup RAM | 31 × 8-bit bytes |
| Clock Crystal | 32.768kHz timekeeping crystal (module implementation) |
| Time Format | 12-hour or 24-hour |
| Typical Module Signals | VCC, GND, CLK/SCLK, DAT/I/O and RST/CE (check board labels) |
Compatible Devices and Controllers
- Arduino Uno, Nano and compatible AVR boards
- Microcontrollers with suitable 3-wire digital I/O
- ESP8266 and ESP32 boards, with compatible logic levels and wiring
- Embedded clock, calendar and timestamp projects
- Data-logging and timed-control systems
Applications
- Digital clocks and calendar displays
- Timestamping sensor readings and data logs
- Scheduled switching and automation projects
- Alarm clocks and timed reminders
- Time-based control for irrigation and monitoring prototypes
Connection and Setup Guide
- Identify the module’s printed pin labels before wiring; pin order can differ between board layouts.
- Connect VCC and GND to a suitable supply supported by the module.
- Connect CLK/SCLK, DAT/I/O and RST/CE to three available controller GPIO pins.
- Install a compatible DS1302 library in the Arduino IDE or your selected development environment.
- Upload a test sketch to set the initial date and time, then read the clock values.
- Fit a suitable backup cell if required and confirm that time is retained after main power is disconnected.
Important Before Buying
- The DS1302 IC supports a wide supply range, but the complete module’s safe input voltage depends on its components and board design. Check the module revision before applying 5V.
- CR2032 cells are normally non-rechargeable. Do not enable the DS1302 trickle-charge function when using a non-rechargeable lithium coin cell; charging it can cause leakage, overheating or damage. Confirm the module’s charging circuit and library configuration.
- The product name indicates CR2032 support, but the supplied battery’s inclusion and condition are not confirmed. Check package contents before ordering if a cell is required.
- Battery backup preserves the clock/calendar; it does not keep the connected microcontroller or display running.
- Use the correct pin mapping and a compatible DS1302 library. The interface is a 3-wire synchronous serial protocol, not standard I2C.
- Exact PCB dimensions, current draw and connector/header inclusion are not confirmed for this listing.
Frequently Asked Questions
What does the DS1302 RTC module do?
It tracks seconds, minutes, hours, day, date, month and year so a microcontroller project can keep time and create timestamps or scheduled actions.
Does it use a CR2032 battery?
The module is designed around CR2032 backup-cell support as indicated by its product name. Confirm whether the battery is included with the supplied package.
Can I use it with Arduino Uno or Nano?
Yes. It can communicate with compatible Arduino boards using three digital signal connections and a suitable DS1302 library.
Does the DS1302 use I2C?
No. The DS1302 uses a three-wire synchronous serial interface with CE/RST, I/O data and SCLK clock signals.
Can it keep time when the main power is off?
With a suitable backup cell installed and working, the RTC can continue timekeeping while the main module supply is disconnected. The microcontroller itself will not remain powered by the RTC cell.
Does it support 12-hour and 24-hour time?
Yes. The DS1302 supports both 12-hour mode with AM/PM indication and 24-hour mode.
Can I use a CR2032 rechargeable charging circuit?
A standard CR2032 is non-rechargeable. Do not enable the DS1302 trickle charger with this cell. Use only a backup arrangement approved for the exact module and battery type.
Is the module compatible with ESP32 or ESP8266?
It can be used with these controllers through GPIO, but verify the module’s signal voltage and connect it safely to the controller’s 3.3V logic. Check the pin labels and wiring before powering up.
Why Buy from PcGuy Computers?
- Local ordering in Pakistan
- Product information focused on practical compatibility
- Support for electronics and DIY project selection
- Convenient online ordering
Buy DS1302 CR2032 Electronic Clock Module in Pakistan
Order the DS1302 CR2032 Electronic Clock Module from PcGuy Computers for Arduino timekeeping, data logging and scheduled automation projects. Check the battery inclusion, module supply rating and backup-cell charging arrangement before installation.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.