NodeMCU CP2102 WIFI ESP32 USB TYPE C Development Board
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the NodeMCU CP2102 Wi-Fi ESP32 USB Type-C Development Board in Pakistan for IoT, smart-home automation, wireless sensors and robotics. It combines ESP32 Wi-Fi and Bluetooth capabilities with a CP2102 USB-to-serial interface and Type-C programming connection.
- Microcontroller: ESP32 32-bit dual-core family
- USB Interface: CP2102 USB-to-UART
- USB Connector: USB Type-C
- Wi-Fi: 2.4GHz IEEE 802.11 b/g/n
- Bluetooth: Classic + BLE (variant dependent)
- Logic Voltage: 3.3V
- Input Power: 5V via USB Type-C
- CPU Frequency: Up to 240MHz (variant dependent)
- Flash Memory: 4MB listed (model dependent)
- GPIO: Multiple digital I/O; board revision dependent
- Programming: Arduino IDE / ESP-IDF / MicroPython
₨3,960.00
45 in stock
45 in stock
Description
The NodeMCU CP2102 Wi-Fi ESP32 USB Type-C Development Board is a versatile microcontroller platform for IoT, wireless automation, robotics and connected electronics projects. It combines an ESP32 dual-core processor with built-in 2.4GHz Wi-Fi and Bluetooth, while the CP2102 USB-to-serial interface makes programming and serial monitoring straightforward through its USB Type-C connector.
Key Features
Provides 32-bit processing for connected devices, sensor systems and embedded control applications.
Built-in 2.4GHz Wi-Fi supports wireless networking, web servers, remote monitoring and IoT communication.
ESP32 wireless capabilities support Bluetooth Classic and Bluetooth Low Energy on compatible ESP32 variants.
USB-to-UART conversion enables firmware uploads and serial communication with a computer.
Modern reversible connector for board power and programming using a suitable USB data cable.
Works with supported ESP32 development environments such as Arduino IDE, ESP-IDF and MicroPython.
Technical Specifications
| Board Type | NodeMCU ESP32 development board |
|---|---|
| Microcontroller | ESP32 family, 32-bit dual-core (exact module variant may differ) |
| USB-to-Serial | CP2102 |
| USB Connector | USB Type-C |
| Wi-Fi | 2.4GHz IEEE 802.11 b/g/n |
| Bluetooth | Bluetooth Classic and BLE support on compatible ESP32 variants |
| Logic Voltage | 3.3V |
| Input Power | 5V via USB Type-C (or board VIN where supported) |
| CPU Frequency | Up to 240MHz, depending on ESP32 variant and configuration |
| Flash Memory | 4MB listed; capacity may vary by fitted module |
| GPIO | Multiple digital I/O; exact available pins depend on board layout |
| Development Platforms | Arduino IDE, ESP-IDF, MicroPython and compatible tools |
Compatible Devices and Development Tools
- Arduino IDE with the Espressif ESP32 board package
- ESP-IDF and supported MicroPython firmware
- 2.4GHz Wi-Fi routers and access points
- 3.3V-compatible sensors, displays, switches and communication modules
- Compatible I2C, SPI, UART and PWM peripherals, subject to pin availability
- External relay, motor and actuator driver boards with suitable power supplies
Applications
- Wi-Fi smart-home automation and connected switches
- Wireless sensor networks and environmental monitoring
- IoT dashboards, MQTT clients and cloud-connected data loggers
- Bluetooth peripherals and BLE sensor projects
- Robotics, remote control and embedded automation
- Web-server and network-enabled DIY electronics projects
Connection and Setup Guide
- Connect the board to your computer using a USB Type-C data cable.
- Install the CP2102 USB-to-UART driver if your computer does not detect the serial port.
- Install the ESP32 board package in Arduino IDE or choose your preferred supported development environment.
- Select the matching ESP32 board profile and the detected serial/COM port.
- Upload a basic test sketch; if upload mode is not entered automatically, follow the board’s BOOT and EN button sequence.
- Connect external modules only after checking the pinout, current requirements and 3.3V logic compatibility.
Important Before Buying
- ESP32 GPIO uses 3.3V logic and is generally not 5V tolerant. Use a suitable level shifter for 5V signal devices.
- The board accepts 5V through USB Type-C; the ESP32 itself operates at 3.3V through its onboard regulator. Do not apply 5V directly to a 3V3 pin.
- Exact ESP32 module, pin count, flash configuration and GPIO mapping can vary between board revisions. Check the supplied board’s markings and pinout before wiring.
- The listed 4MB flash capacity is model-dependent; verify the fitted module if your project requires a specific flash size.
- Wi-Fi and Bluetooth activity can cause current peaks. Use a stable 5V supply and avoid powering motors or high-current loads from the board.
- Some GPIO pins have boot-strapping or input-only restrictions. Review the exact pinout before using them for external circuits.
- USB cable inclusion and pin-header soldering status are not confirmed in the product information.
Frequently Asked Questions
What is the NodeMCU ESP32 CP2102 board used for?
It is used for IoT devices, Wi-Fi automation, wireless sensors, Bluetooth projects, robotics, data logging and other embedded electronics applications.
Does this board have built-in Wi-Fi and Bluetooth?
Yes. ESP32 variants provide 2.4GHz Wi-Fi and Bluetooth capabilities. Exact Bluetooth features depend on the fitted ESP32 module variant.
What is the CP2102 chip used for?
The CP2102 converts USB communication to serial UART, allowing your computer to upload firmware and exchange serial data with the ESP32.
Can I program it with Arduino IDE?
Yes. Install the Espressif ESP32 board package, select the matching board profile and choose the correct serial port.
Is the USB Type-C port used for programming?
Yes. The Type-C port provides the USB connection used for power and communication through the onboard CP2102 interface. Use a data-capable cable.
Can I connect 5V sensors directly to its GPIO pins?
No. ESP32 GPIO is 3.3V logic and is generally not 5V tolerant. Use a suitable logic-level converter or interface circuit.
How much flash memory does the board have?
The listing specifies 4MB, but ESP32 board variants can use different flash capacities. Check the fitted module or read its flash information if exact capacity matters.
Does the package include a USB cable or pin headers?
The product information does not confirm USB cable inclusion or the pin-header soldering status. Please verify the package contents if these accessories are required.
Why Buy from PcGuy Computers?
- Local ordering in Pakistan
- Product information focused on practical compatibility
- Support for electronics and IoT project selection
- Convenient online ordering
Buy NodeMCU CP2102 Wi-Fi ESP32 USB Type-C Development Board in Pakistan
Order the NodeMCU CP2102 Wi-Fi ESP32 USB Type-C Development Board from PcGuy Computers for IoT, wireless automation, Bluetooth and embedded electronics projects. Check the exact ESP32 variant, pinout and GPIO voltage limits before connecting external components.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.