Keyestudio S12SD UVR UV Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Keyestudio S12SD UVR UV Sensor Module uses a GUVA-S12SD sensing element to detect ultraviolet radiation and provide an analog output. Its simple 3-pin interface makes it suitable for Arduino, environmental monitoring, sunlight experiments and STEM electronics projects.
- Sensor Element: GUVA-S12SD
- Module Marking: S12SD UVR
- Detection Range: 240–370nm
- Supply Voltage: 2.5V–5V
- Output: Analog Signal
- Interface: 3-pin (S, +, -)
- Responsivity: 0.14A/W at 300nm (specified condition)
- Applications: UV Monitoring, Sunlight Experiments and STEM Projects
- Note: Raw analog output is not a calibrated UV Index reading
₨1,540.00
10 in stock
10 in stock
Description
The Keyestudio S12SD UVR UV Sensor Module is an analog ultraviolet light detector built around the GUVA-S12SD sensing element. It detects UV radiation in the 240–370nm spectral range and converts the light level into an analog signal that a compatible microcontroller can read. It is useful for UV monitoring experiments, sunlight studies, environmental sensing and Arduino-based STEM projects.
Key Features
UV Detection
Responds to ultraviolet radiation across the sensor’s specified 240–370nm spectral range.
Analog Output
Provides a changing analog signal for reading with a compatible microcontroller ADC.
Wide Supply Range
Keyestudio specifies a 2.5V–5V supply for the GUVA-S12SD module.
Simple 3-Pin Connection
Uses signal, positive supply and ground pins for straightforward prototyping.
UV Monitoring Projects
Suitable for experiments involving sunlight, UV lamps and environmental measurements.
Arduino Compatible
Read its analog output with Arduino and other controllers that support compatible input voltage levels.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Sensor Element | GUVA-S12SD |
| Module Marking | S12SD UVR |
| Sensor Type | Ultraviolet light sensor |
| Supply Voltage | 2.5V–5V |
| Output Signal | Analog |
| Spectral Detection Range | 240–370nm |
| Responsivity | 0.14A/W (at 300nm, specified test condition) |
| Active Area | 0.076mm² |
| Dark Current | 1nA (specified test condition) |
| Light Current | 101–125nA under UVA illumination at 1mW/cm² (specified test condition) |
| Module Dimensions | Approximately 15 × 30 × 0.7mm (documented sensor/module size) |
| Interface | 3-pin analog connection: S, +, – |
Applications and Project Ideas
- UV exposure experiments: Observe changes in UV readings under different sunlight conditions.
- Environmental monitoring: Add UV response measurements to a microcontroller-based monitoring project.
- UV lamp experiments: Compare sensor responses under suitable UV sources while following lamp safety guidance.
- Outdoor electronics: Build a basic UV-level data logger using an analog input.
- STEM learning: Explore analog signals, sensor response and ultraviolet radiation.
Wiring and Setup
| Module Pin | Connection |
|---|---|
| S | Analog input (for example, Arduino A0) |
| + | Compatible supply, 2.5V–5V |
| – | GND |
- Connect the module’s positive pin to a suitable supply within the specified 2.5V–5V range.
- Connect the negative pin to controller ground.
- Connect S to an analog input pin.
- Read the analog value using the controller’s ADC and observe how it changes when UV exposure changes.
- For meaningful UV-index estimates, use an appropriate calibration method; raw ADC values alone are not a calibrated UV index.
Important Usage and Safety Notes
This module provides an analog response to UV radiation; it does not automatically provide a certified or calibrated UV Index reading. Sensor output can be affected by the light source, angle, distance, temperature, supply and controller ADC reference. Use calibration and suitable measurement methods if you need quantitative readings.
Never look directly at UV lamps or expose skin or eyes unnecessarily. Follow the UV source manufacturer’s safety instructions and use appropriate shielding and protective equipment. Do not treat this module as a personal UV safety device.
Frequently Asked Questions
What does the S12SD UVR module detect?
It detects ultraviolet radiation using the GUVA-S12SD sensing element and produces an analog output signal.
What is its UV detection wavelength range?
The documented spectral detection range is 240–370nm.
Is the output analog or digital?
The module provides an analog signal. Connect its S pin to a compatible analog input.
What supply voltage does it need?
Keyestudio specifies a supply voltage of 2.5V to 5V for this GUVA-S12SD module.
Can I use it with Arduino Uno?
Yes. Connect S to an analog input such as A0, + to a compatible supply and – to GND. Read the signal using analogRead().
Does it directly display the UV Index?
No. It provides an analog sensor response. Converting readings into a reliable UV Index requires suitable calibration and a measurement method.
Can it detect UV from sunlight?
It can respond to ultraviolet radiation in sunlight. Readings depend on weather, angle, shading and other environmental conditions.
Can it be used with ESP32?
It can be used with an ESP32 analog input when the sensor output voltage is kept within the ESP32 ADC input limits. Use appropriate voltage scaling if needed; do not apply a 5V signal directly to an ESP32 input.
Why Buy from PcGuy Computers?
PcGuy Computers provides product information and assistance to help customers select suitable electronics and STEM development modules. Confirm the exact board revision, package contents and applicable warranty terms with the store before ordering.
Keyestudio S12SD UVR UV Sensor Module – Summary
The Keyestudio S12SD UVR module is a compact analog UV detector for Arduino and compatible electronics projects. With a 2.5V–5V supply range and 240–370nm spectral response, it is suitable for UV experiments, sunlight monitoring and STEM learning. Use calibration for quantitative UV Index readings and follow UV source safety guidance.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.