Keyestudio ATmega 328P Pro Mini 5v Development Board

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the Keyestudio ATmega328P Pro Mini 5V Development Board in Pakistan for compact Arduino-compatible projects. Featuring a 16MHz ATmega328P, 14 digital I/O pins, 8 analogue inputs and 6 PWM outputs, this small controller is ideal for embedded electronics and prototyping. An external USB-to-Serial adapter is required for programming.

  • Brand: Keyestudio
  • Model: KS0247 Pro Mini 5V
  • Microcontroller: ATmega328P-AU
  • Operating Voltage: 5V
  • Recommended VIN: 7–9V DC
  • Clock Speed: 16MHz
  • Digital I/O: 14 pins
  • Analogue Inputs: 8 (A0–A7)
  • PWM Outputs: 6
  • Flash / SRAM / EEPROM: 32KB / 2KB / 1KB
  • Programming: External FTDI / USB-to-Serial adapter required

₨3,080.00

7 in stock

7 in stock

Description

The Keyestudio ATmega328P Pro Mini 5V Development Board is a compact Arduino-compatible controller for embedded electronics, robotics, sensor interfaces and space-saving DIY projects. It runs at 5V with a 16MHz clock and provides 14 digital I/O pins, 8 analogue inputs and 6 PWM outputs. An external USB-to-Serial adapter is required for programming because this board does not include an onboard USB interface.

Key Features

ATmega328P Microcontroller

Built around the ATmega328P-AU 8-bit AVR microcontroller with broad Arduino IDE support.

5V / 16MHz Operation

Designed for 5V logic projects and runs with a 16MHz crystal oscillator.

14 Digital I/O Pins

Connect digital sensors, switches, indicators and compatible electronic modules.

8 Analogue Inputs

Read analogue signals through inputs A0 to A7; A6 and A7 are analogue-input-only pins.

6 PWM Outputs

Use D3, D5, D6, D9, D10 and D11 for PWM-based control such as LED dimming.

Compact Pro Mini Format

A small board suited to breadboards and permanent installations where space is limited.

Technical Specifications

Brand Keyestudio
Model KS0247 / Pro Mini 5V
Microcontroller ATmega328P-AU
Operating Voltage 5V
Recommended VIN Supply DC 7–9V
Clock Speed 16MHz
Digital I/O Pins 14 (D0–D13)
PWM Pins 6 (D3, D5, D6, D9, D10, D11)
Analogue Inputs 8 (A0–A7)
Flash Memory 32KB (2KB used by bootloader)
SRAM 2KB
EEPROM 1KB
Serial Interface TTL UART (RX/TX); external USB-to-Serial adapter required
Dimensions Approx. 40 × 18 × 14mm
Weight Approx. 4.1g

Compatible Devices and Controllers

  • Arduino IDE for writing and uploading compatible sketches
  • FTDI / USB-to-TTL serial adapters with suitable 5V logic and matching pin connections
  • 5V-compatible digital sensors, analogue sensors, LEDs and electronic modules
  • Compatible breadboards, jumper wires and prototyping circuits

Applications

  • Compact Arduino-based DIY and STEM electronics projects
  • Sensor reading and basic data acquisition
  • Small robotics and control systems
  • LED effects, PWM control and automation prototypes
  • Embedded installations where a full-size development board is too large

Connection and Setup Guide

  1. Install the Arduino IDE on your computer.
  2. Connect a compatible 5V USB-to-Serial / FTDI adapter to the board’s serial header. Match GND to GND, 5V to VCC, adapter TX to board RX, and adapter RX to board TX.
  3. Check the adapter voltage setting and board pin labels before applying power. Use a 5V logic-level adapter for this 5V version.
  4. Connect the adapter to your computer and select the appropriate Pro Mini / ATmega328P board and processor option in the Arduino IDE.
  5. Upload a test sketch. If automatic reset is not supported by the adapter, press the board’s reset button when the upload begins.

Important Before Buying

  • No onboard USB: A compatible external USB-to-Serial adapter is required for programming and serial communication with a computer.
  • Power input: Apply regulated 5V to VCC, or use the VIN input with the documented recommended 7–9V DC supply. Do not apply 7–9V directly to VCC.
  • 5V logic: This is the 5V / 16MHz version. Check voltage-level compatibility before connecting 3.3V-only devices.
  • Pin current: Do not treat the microcontroller’s absolute per-pin current limit as a normal operating target. Use suitable driver circuits for motors, relays and higher-current loads.
  • Adapter and accessories: Confirm the product listing and package contents before ordering; the FTDI adapter, cables and other accessories are not stated as included.

Frequently Asked Questions

Is the Keyestudio Pro Mini compatible with Arduino IDE?

Yes. It uses the ATmega328P and can be programmed with the Arduino IDE using a compatible external USB-to-Serial adapter.

Does this board have a USB port?

No. It does not have an onboard USB-to-Serial interface. A separate FTDI or compatible USB-to-TTL serial adapter is needed to upload sketches.

What power supply does the 5V Pro Mini require?

It operates at 5V. You can provide regulated 5V to the 5V/VCC pin, or use the VIN input with the recommended 7–9V DC supply. Check the board labels before connecting power.

How many digital and analogue pins are available?

The board provides 14 digital I/O pins and 8 analogue inputs labelled A0 through A7. A6 and A7 are analogue-input-only.

Which pins support PWM?

The six PWM-capable pins are D3, D5, D6, D9, D10 and D11.

Can I connect 3.3V sensors directly?

Check the sensor’s output and input voltage requirements first. This is a 5V logic board, so level shifting may be required to safely interface with 3.3V-only devices.

Can it control motors or relays directly?

Use a suitable motor driver, transistor or relay driver module. Do not connect motors or other high-current loads directly to the microcontroller I/O pins.

Is the FTDI programmer included?

The product is listed as the Pro Mini development board. An external USB-to-Serial adapter is required, but it is not stated as included. Please check the package contents before purchase.

Why Buy from PcGuy Computers?

  • Pakistan-focused online ordering for electronics and development boards
  • Product information to help you choose compatible components
  • Support for Arduino, STEM and DIY electronics requirements
  • Order assistance and after-sales support

Buy Keyestudio ATmega328P Pro Mini 5V Development Board in Pakistan

Order the Keyestudio ATmega328P Pro Mini 5V Development Board from PcGuy Computers for compact Arduino-compatible projects, sensor systems and embedded prototypes. Its 16MHz controller and versatile I/O make it a practical choice when you need a small 5V development board. Remember to arrange a compatible USB-to-Serial adapter for programming.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio ATmega 328P Pro Mini 5v Development Board”

Your email address will not be published. Required fields are marked *