Keyestudio KS0198 4DOF Robot Mechanical Arm Kit (Arduino DIY)
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the Keyestudio KS0198 4DOF Robot Mechanical Arm Kit for hands-on Arduino robotics, servo control and STEM learning. It includes a V4.0 ATmega328P control board, servo driver shield, four 180° servos, two wired joysticks, BT-24 module and acrylic arm parts. Control it with the included joysticks or the documented phone Bluetooth method. Wireless PS2 controller and 18650 cells are not listed as included.
- Brand: Keyestudio
- Model: KS0198
- Movement: 4DOF
- Control Board: V4.0, ATmega328P
- Servos: 4 × 180°
- Manual Control: 2 wired joystick modules
- Phone Control: BT-24 Bluetooth module
- Power Input: DC 7–9V for servo driver shield
- Optional: Wireless PS2 joystick/receiver not included
₨15,400.00
43 in stock
43 in stock
Description
The Keyestudio KS0198 4DOF Robot Mechanical Arm Kit is a DIY Arduino robotics project with four 180° servo motors, a Keyestudio V4.0 control board, servo driver shield and two wired joystick modules. Build the acrylic mechanical arm, connect the control electronics and experiment with joystick operation, Bluetooth phone control and programmed servo movements. It is designed for robotics learning, STEM education and hands-on Arduino projects.
Build and Control a 4DOF Robotic Arm
Four degrees of freedom (4DOF) provide four servo-controlled axes for moving the arm base, arm joints and gripping claw. The kit combines mechanical assembly with electronics and programming, so users can learn how servo positions translate into physical movement.
Four 180° Servos
Four black 180-degree servo motors operate the robotic arm’s movement axes.
Arduino-Compatible Control
The Keyestudio V4.0 board is based on the ATmega328P microcontroller.
Servo Driver Shield
The dedicated driver shield connects and powers the arm’s servo system.
Dual Joystick Control
Two included joystick modules provide wired manual control of the arm.
Bluetooth Phone Control
The kit includes a BT-24 module for the documented phone-control method.
DIY Acrylic Construction
Assemble the acrylic arm structure, holder, joints and claw using the supplied hardware.
Keyestudio V4.0 Control Board
The included V4.0 development board is Arduino Uno-compatible and uses an ATmega328P MCU with a CP2102 USB-to-serial converter. It is the main controller for the robot arm and can be programmed with Arduino-compatible code using the manufacturer’s tutorials.
Servo Driver Shield and Power
The servo driver shield provides the connections for the four arm servos and joystick/extension interfaces. The current KS0198 documentation specifies a DC 7–9V VIN input, 5A input-current specification and two 5V outputs rated at 3A. The shield measures 73 × 53.34 mm. Use a suitable regulated supply and follow the manufacturer’s wiring guidance; do not power the complete arm from the computer USB port alone.
Three Control Methods
- Wired joystick control: Use the two included joystick modules to move the arm manually.
- Phone Bluetooth control: Use the included BT-24 module with the supported phone app and example code described in the manufacturer’s guide.
- Wireless PS2 joystick control: The driver shield supports a compatible Sony PS2 receiver, but the wireless PS2 joystick/receiver is an optional extra and is not included in the KS0198 kit list.
Learn Servo Positioning and Motion
The manufacturer’s tutorial explains how to initialise each servo and set its angle before assembly. It also documents the joystick pin assignments and example projects for dual-joystick control, posture memory and Bluetooth control. These exercises introduce servo angles, coordinated movement, input reading and basic automation.
DIY Acrylic Mechanical Structure
The kit includes acrylic panels, a handle and a cylindrical ABS holder. Assemble the base, arm joints and claw with the supplied screws, nuts and copper pillars. The manufacturer’s guide recommends removing the protective film from the acrylic parts before installation and setting servo positions before fixing the relevant linkages.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Model | KS0198 |
| Product Type | 4DOF DIY Robot Mechanical Arm Kit |
| Degrees of Freedom | 4 |
| Control Board | Keyestudio V4.0 Arduino Uno-compatible board |
| Microcontroller | ATmega328P |
| USB-to-Serial | CP2102 |
| Servo Motors | 4 × black 180° servos |
| Servo Driver | Keyestudio servo motor driver shield |
| Manual Control | 2 × wired joystick modules |
| Bluetooth Module | BT-24 module |
| Optional Control | Wireless PS2 joystick receiver/controller (not included) |
| Shield Input Voltage | DC 7–9V (manufacturer specification) |
| Shield Input Current | 5A (manufacturer specification) |
| 5V Outputs | 2 channels, 5V / 3A specification |
| Shield Dimensions | 73 × 53.34 mm |
| Mechanical Structure | Acrylic panels, handle and ABS cylindrical holder |
| Battery Holder | 18650 two-slot holder included; cells not listed separately |
| Programming | Arduino-compatible programming and manufacturer tutorials |
Package Contents
The official KS0198 / KS0198X documentation lists the following items:
- 1 × Keyestudio V4.0 control board
- 1 × Keyestudio servo motor driver shield
- 1 × acrylic board set
- 1 × acrylic handle
- 1 × MeArm ABS cylindrical holder
- 4 × black 180° servo motors
- 1 × BT-24 module
- 2 × Keyestudio joystick modules
- 2 × 3D PS2 joystick caps
- 1 × 3 × 40 mm screwdriver
- 1 × galvanised wrench
- 12 × M3 × 6 mm round-head screws
- 22 × M3 × 10 mm round-head screws
- 12 × M3 × 12 mm round-head screws
- 4 × M3 × 24 + 6 mm copper pillars
- 10 × M3 × 6 + 6 mm copper pillars
- 22 × M3 stainless-steel hex nuts
- 24 × M3 hex nuts
- 8 × M1.2 × 5 mm Phillips self-tapping screws
- 10 × M2 × 5 mm Phillips self-tapping screws
- 10 × M3 stainless-steel flat washers
- 2 × M2 × 8 mm Phillips self-tapping screws
- 4 × M3 × 16 mm flat-head screws
- 4 × 10 cm male-to-female jumper wires
- 10 × 50 cm female-to-female jumper wires
- 7 × black 3 × 100 mm cable ties
- 1 × 18650 two-slot battery holder
Not included: The wireless PS2 joystick/receiver is described as an optional control method, not part of the listed kit contents. The two 18650 battery cells are also not listed as included; check the package before powering the arm.
Why Buy from PcGuy Computers?
PcGuy Computers offers robotics kits, Arduino boards, electronics modules and practical components for students, makers and DIY projects. The KS0198 brings the mechanical structure, controller, servo system and manual controls together in one educational robot arm kit.
Buy the Keyestudio KS0198 4DOF Robot Mechanical Arm Kit in Pakistan from PcGuy Computers and explore hands-on robotic assembly, joystick operation, Bluetooth control and Arduino programming.
Frequently Asked Questions
What is the Keyestudio KS0198?
It is a DIY four-degree-of-freedom robotic arm kit with a Keyestudio V4.0 control board, servo driver shield, four servos, two wired joysticks and mechanical assembly parts.
What does 4DOF mean?
4DOF means four degrees of freedom: the arm has four servo-controlled movement axes for positioning and operating its claw.
Does the kit include the Arduino-compatible board?
Yes. The official kit list includes one Keyestudio V4.0 control board based on the ATmega328P MCU.
How many servo motors are included?
Four black 180-degree servo motors are listed in the official KS0198 kit contents.
Can I control the arm with joysticks?
Yes. Two wired Keyestudio joystick modules are included for manual control.
Can I control it using a phone?
Yes. The manufacturer documents phone Bluetooth control using the included BT-24 module, supported app and example code. Follow the supplied guide for setup.
Is a wireless PS2 controller included?
No. Wireless PS2 joystick control is an optional extension. The compatible PS2 joystick/receiver is not listed among the included KS0198 kit contents.
What power supply does the servo driver shield require?
The current Keyestudio KS0198 documentation specifies DC 7–9V input for the servo driver shield. Use a suitable supply that meets the manufacturer’s current requirements and wiring instructions.
Are 18650 batteries included?
The official list includes a two-slot 18650 battery holder, but does not list the 18650 cells separately. Confirm the supplied package if you need batteries.
Does the kit require assembly?
Yes. It is a DIY kit with acrylic panels, servos, holder parts and fasteners that need to be assembled according to the manufacturer’s guide.
Can I program the KS0198 with Arduino IDE?
The V4.0 board is Arduino Uno-compatible and the manufacturer provides Arduino programming tutorials and example code for the robot arm.
Is the KS0198 suitable for beginners?
Yes. Keyestudio provides assembly instructions, debugging guidance and tutorials intended to help beginners get started with robotics and programming.
What can I learn with this robot arm?
You can practise mechanical assembly, servo positioning, joystick input, Bluetooth control, Arduino programming and basic robotic motion sequences.
Is the PS2 interface available on the driver shield?
Yes. The manufacturer specifies a PS2 interface compatible with a Sony PS2 receiver. The receiver/controller itself is an optional extra, not included in this kit list.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.