YX851 DC12V 10A Power Auto Switching Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the YX851 DC12V 10A automatic power switching module for compatible 12V backup power projects. Automatically switches a connected load between a primary DC supply and backup battery. Check terminal layout, load rating and battery charging requirements before installation.

₨3,520.00

25 in stock

25 in stock

Description

YX851 DC12V 10A Power Auto Switching Module is designed to automatically change the connected load between a primary 12V DC supply and a backup battery. It helps keep compatible 12V equipment powered when the main supply is interrupted, without requiring manual source switching.

Key Features

Automatic Source Switching

Changes the load’s power source between the main supply and backup battery according to the module’s switching conditions.

12V DC Operation

Designed for 12V DC power systems. Confirm the voltage of every connected source and load before installation.

10A Rated Control Current

The product is specified for 10A. Keep the connected load within the module’s stated rating and verify wiring and component limits.

Backup Battery Support

Can be used in suitable setups with a primary DC supply and a compatible backup battery.

Adjustable Voltage Thresholds

YX851 documentation describes adjustment points for charging start and stop thresholds. Set them carefully for the battery and system being used.

Compact PCB Module

A small circuit-board module with screw terminals for integrating into compatible DIY and electronic power projects.

Specifications

Model YX851
Product Type DC automatic power switching module
Control Voltage DC 12V
Control Current 10A
Dimensions Approx. 69 × 48 × 18 mm
Mounting Size Approx. 61 × 41 mm
Connections Screw-terminal connections

Specifications are based on available YX851 product documentation and matching listings. Confirm the exact terminal layout and ratings on the supplied board before wiring; relay contact ratings shown in some third-party manuals may not represent the complete safe operating rating of the assembled module.

How Does the YX851 Module Work?

  • When the primary supply is available, the module gives it priority to power the connected load.
  • If the primary supply is interrupted, the module switches the load to the connected backup battery, subject to the module’s configured thresholds.
  • When the primary supply returns, the module can switch the load back to the main source.

The board includes charging-control threshold adjustment in the documented YX851 design. It should not be assumed to replace a battery charger or battery-management system. Use a suitable charging arrangement for your battery chemistry and capacity.

Suitable Applications

  • 12V backup power projects
  • Compatible security and CCTV equipment
  • Routers and communication devices with suitable 12V requirements
  • DIY UPS and emergency power projects
  • Electronic automation and control projects
  • Battery-backed DC equipment

Installation & Safety Notes

Identify the primary supply, battery and load terminals from the markings and wiring diagram for your exact board revision. Disconnect all power sources before wiring, observe polarity, and secure each terminal connection. Check that the power supply, battery, load, wiring and connectors are all suitable for the intended current.

This is a DC 12V module, not a mains AC power supply. Do not connect it directly to mains voltage or a higher-voltage DC system. Incorrect polarity, unsuitable battery charging settings or exceeding the module’s ratings can cause damage, overheating or fire. If you are unsure about the wiring, ask a qualified technician to install it.

Why Buy from PcGuy Computers?

✓ Pakistan-Wide Order Support
✓ Help with Product Selection
✓ Clear Product Information
✓ Electronics & Robotics Components
✓ After-Sales Order Assistance

Frequently Asked Questions

What does the YX851 module do?

It automatically switches a compatible load between a primary DC power source and a backup battery when the supply conditions change.

What is its operating voltage?

The listed control voltage is DC 12V. It is intended for compatible 12V systems.

What is the current rating?

The product is specified at 10A. Ensure the actual load and all wiring components remain within their applicable ratings.

Can it switch to a battery during a power failure?

Yes. In a correctly configured compatible setup, it switches the connected load to the backup battery when the primary supply is interrupted.

Does it support battery charging control?

YX851 documentation describes adjustable charging start and stop voltage thresholds. Use a suitable charger and battery-protection arrangement for your battery type; do not assume this module is a complete standalone charger.

What are the module dimensions?

Available product documentation lists approximate dimensions of 69 × 48 × 18 mm and a mounting size of approximately 61 × 41 mm.

Can I use it with a 24V power system?

No. The listed control voltage is DC 12V. Do not connect it to a 24V system.

What is included in the package?

The listed package includes one YX851 DC12V 10A automatic power switching module. A separate power supply, battery and wiring are not listed as included.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “YX851 DC12V 10A Power Auto Switching Module”

Your email address will not be published. Required fields are marked *