Keyestudio BMP180 Digital Barometric Pressure Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The Keyestudio BMP180 Digital Barometric Pressure Sensor Module measures atmospheric pressure and temperature over I²C. Use it with Arduino and compatible controllers for weather stations, environmental monitoring and pressure-based altitude estimation.

  • Brand: Keyestudio
  • Reference Module: KS0054 (verify board marking)
  • Sensor IC: Bosch BMP180
  • Pressure Range: 300–1100 hPa
  • Measurements: Pressure and temperature
  • Communication: I²C
  • I²C Address: 0x77 (7-bit)
  • Module Supply: 1.8V–6V (KS0054 documentation)
  • Applications: Weather stations, altitude estimation and environmental monitoring
  • Note: Chip voltage and breakout-board voltage differ; verify logic-level compatibility

₨1,320.00

16 in stock

16 in stock

Description

The Keyestudio BMP180 Digital Barometric Pressure Sensor Module measures atmospheric pressure and temperature through an I²C digital interface. Based on the BMP180 pressure sensor, it is suitable for Arduino weather stations, altitude-estimation experiments, environmental monitoring, GPS-related projects and STEM electronics. A microcontroller can use the pressure readings to calculate an estimated altitude; altitude is calculated from pressure and a reference sea-level pressure rather than measured directly.

Key Features

Barometric Pressure

Measures atmospheric pressure across the sensor’s specified 300–1100 hPa range.

Temperature Output

Includes temperature measurement used alongside pressure readings.

I²C Communication

Connects to a compatible microcontroller using the I²C bus.

Altitude Estimation

Supports software-based altitude calculations for navigation and weather projects.

Low-Power Sensor

BMP180 is designed for low-power environmental sensing applications.

Arduino Projects

Useful for weather stations, pressure logging, STEM experiments and embedded prototypes.

Technical Specifications

Brand Keyestudio
Reference Module KS0054 (verify board marking and connector)
Sensor IC Bosch BMP180
Sensor Type Digital barometric pressure and temperature sensor
Pressure Range 300–1100 hPa
Altitude Range Reference Approximately -500m to +9000m (pressure-derived estimate)
Module Supply Voltage 1.8V–6V, as specified for the Keyestudio KS0054 module
BMP180 Chip Supply 1.8V–3.6V; observe the breakout board’s regulator and level-shifting design
Communication I²C
I²C Address 0x77 (7-bit)
Maximum I²C Speed Up to 3.5MHz (sensor specification; actual bus speed depends on the board and controller)
Temperature Output Supported

Applications and Project Ideas

  • Weather station: Monitor atmospheric pressure trends alongside temperature readings.
  • Altitude estimation: Calculate approximate elevation using pressure and a reference sea-level pressure.
  • Environmental logging: Record pressure changes over time with a microcontroller.
  • Navigation experiments: Explore pressure-based elevation changes in GPS-related projects.
  • STEM learning: Learn I²C communication, sensor calibration data and environmental measurement.

Wiring and Setup

  • Identify the module’s VCC, GND, SDA and SCL connections from the board labels or documentation.
  • Connect SDA and SCL to the matching I²C pins on your controller.
  • Connect power only within the supported range for the exact breakout board. The BMP180 chip itself is a 1.8V–3.6V device; do not assume every board accepts 5V logic unless its circuitry supports it.
  • Use an Arduino-compatible BMP180 library or an I²C driver to read temperature and pressure.
  • For altitude estimation, supply a suitable local sea-level pressure reference and recalibrate as weather conditions change.

Important Buying and Compatibility Notes

The BMP180 chip operates at a lower voltage than many 5V microcontroller boards. The Keyestudio KS0054 breakout is documented for a 1.8V–6V module supply, but board-level voltage handling depends on its onboard circuitry. Confirm the exact board revision and pin labels before connecting it. Do not apply 5V directly to the bare BMP180 chip pins.

Pressure-based altitude is an estimate and changes with weather. For meaningful elevation readings, use a current local sea-level pressure reference. Protect the sensor from liquid water and condensation; it is an environmental sensor, not a waterproof device.

Frequently Asked Questions

What does the Keyestudio BMP180 module measure?

It measures atmospheric pressure and temperature. A controller can use the pressure reading to calculate an estimated altitude.

What is the pressure measurement range?

The BMP180’s specified pressure range is 300 to 1100 hPa.

Does it support I²C?

Yes. The sensor communicates over I²C. Its commonly used 7-bit address is 0x77.

Can I use it with Arduino Uno?

Yes, when the breakout board’s supply and I²C signal levels are compatible. Connect SDA and SCL to the board’s I²C pins and use a suitable BMP180 library.

Can it calculate altitude?

Yes. Your code can estimate altitude from measured pressure and a reference sea-level pressure. It does not directly measure height, and weather changes affect the result.

Does the module accept 5V?

Keyestudio specifies a 1.8V–6V supply for the KS0054 breakout module. The BMP180 chip itself operates at 1.8V–3.6V, so check the exact breakout circuitry and logic-level handling before connecting a 5V controller.

Can it be used for a weather station?

Yes. It can log atmospheric pressure and temperature for educational and hobby weather-monitoring projects.

Is the BMP180 waterproof?

No waterproof rating is specified for this module. Keep it protected from water, condensation and direct exposure to liquids.

Why Buy from PcGuy Computers?

PcGuy Computers provides product information and assistance to help customers choose suitable electronics and STEM development modules. Confirm the exact module revision, package contents and applicable warranty terms with the store before ordering.

Keyestudio BMP180 Digital Barometric Pressure Sensor Module – Summary

The Keyestudio BMP180 module is an I²C pressure and temperature sensor for Arduino and compatible projects. With a 300–1100 hPa measurement range and support for pressure-based altitude estimation, it is useful for weather stations, environmental logging and STEM experiments. Check breakout-board voltage compatibility before wiring.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio BMP180 Digital Barometric Pressure Sensor Module”

Your email address will not be published. Required fields are marked *