Keyestudio TDS Meter V1.0 Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Keyestudio TDS Meter V1.0 (KS0429) analog module for measuring total dissolved solids in water with a compatible TDS probe. Supports 3.3–5.5V input, 0–2.3V analog output and a 0–1000ppm measurement range. Probe inclusion is not confirmed in this listing.

₨4,840.00

13 in stock

13 in stock

Description

Keyestudio TDS Meter V1.0 Module is an analog sensor interface designed for measuring Total Dissolved Solids (TDS) in water when connected to a compatible TDS probe. It converts the probe response into an analog voltage that a compatible Arduino or microcontroller can read for water-monitoring and environmental electronics projects.

Key Features

TDS Measurement

Designed to estimate the total dissolved solids level in a water sample, expressed in ppm or mg/L.

Analog Voltage Output

Provides a 0–2.3V analog output signal for reading with a compatible controller ADC input.

Wide Supply Range

Operates from a DC supply between 3.3V and 5.5V, supporting common microcontroller platforms.

Low Working Current

Specified working current is approximately 3–6mA for the meter module.

Compatible Probe Interface

Uses an XH2.54-2P electrode connection for a compatible two-electrode TDS probe.

Arduino Project Use

Suitable for learning, prototyping and building microcontroller-based water-monitoring systems.

Technical Specifications

Brand Keyestudio
Model TDS Meter V1.0 (KS0429)
Input voltage DC 3.3–5.5V
Output voltage 0–2.3V
Working current 3–6mA
TDS measurement range 0–1000ppm
Measurement accuracy ±10% F.S. at 25°C
Module interface XH2.54-3P
Electrode interface XH2.54-2P

Understanding TDS Readings

TDS represents the amount of dissolved substances in water and is commonly expressed in parts per million (ppm) or milligrams per litre (mg/L). This module is intended to provide an indication of dissolved-solids concentration. A TDS reading alone does not identify which substances are present and cannot confirm that water is safe to drink.

Applications and Project Ideas

  • Arduino-based water TDS monitoring experiments
  • Water filter and RO-system monitoring prototypes
  • Aquarium and hydroponics monitoring projects
  • Environmental sensing and data-logging systems
  • STEM education and analog sensor learning

Connection and Usage

Power the module using a regulated supply within its specified 3.3–5.5V input range. Connect the analog output to a compatible analog input on your controller and attach a compatible TDS probe to the electrode connector. Use suitable TDS conversion code and account for temperature when interpreting readings. Follow the Keyestudio wiring guide for the exact pin connections and software setup.

Probe and package note: This product listing is for the TDS Meter V1.0 module. The supplied product information does not confirm that a TDS probe or jumper cable is included, so please check the package contents with the seller before ordering if you need the complete sensor kit.
Important: This is a TDS measurement module, not a certified drinking-water safety tester. TDS indicates the concentration of dissolved material but does not detect every contaminant or establish potability. Use appropriate laboratory testing and certified equipment for health or water-safety decisions. Keep the electronic board dry; only use a waterproof probe where the probe itself is specified as waterproof.

Why Buy from PcGuy Computers?

✓ Pakistan-Wide Order Support
✓ Help with Product Selection
✓ Clear Product Information
✓ Electronics & Robotics Components
✓ After-Sales Order Assistance

Frequently Asked Questions

What does the Keyestudio TDS Meter V1.0 measure?

It measures the total dissolved solids level in a water sample and reports the result as a TDS value, commonly in ppm.

What is the measurement range?

The specified TDS measurement range is 0–1000ppm, with ±10% full-scale accuracy at 25°C.

What input voltage does the module need?

Its specified input supply range is DC 3.3V to 5.5V.

Can I connect it to Arduino?

Yes. Its analog output can be read by a compatible Arduino analog input using suitable TDS reading and conversion code.

Does it provide an analog output?

Yes. The specified output voltage range is 0–2.3V.

Is the TDS probe included?

The current PcGuy product information identifies the item as the module and does not confirm a probe in the package. Please verify the included accessories before purchase.

Does a TDS reading prove that water is safe to drink?

No. TDS is only an indicator of dissolved-solids concentration. It does not identify specific contaminants or certify drinking-water safety.

What projects can use this module?

It can be used in Arduino water-monitoring prototypes, hydroponics and aquarium experiments, filter-monitoring projects and STEM electronics learning.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio TDS Meter V1.0 Module”

Your email address will not be published. Required fields are marked *