84×48 5110 LCD Display Screen Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the 84×48 5110 LCD Display Screen Module in Pakistan for compact monochrome graphics, text, icons and sensor readings. The Nokia 5110-style display uses a PCD8544 controller and serial SPI-compatible interface.

  • Display Type: Monochrome Graphic LCD
  • Resolution: 84 × 48 Pixels
  • Controller: PCD8544 (standard 5110 type)
  • Interface: Serial SPI-compatible
  • Logic Supply: 2.7V–3.3V at controller level
  • Backlight: LED (board pinout/polarity may vary)
  • Typical Pins: RST, CE, DC, DIN, CLK, VCC, LIGHT, GND
  • Applications: Arduino, sensor displays, menus and DIY electronics

₨2,640.00

7 in stock

7 in stock

Description

The 84×48 5110 LCD Display Screen Module is a compact monochrome graphic display for Arduino and microcontroller projects. Based on the PCD8544 controller used in Nokia 5110-style displays, it provides an 84-column × 48-row pixel area for showing text, icons, menus, sensor readings and simple graphics over a serial SPI interface.

Key Features

84 × 48 Resolution

Displays text, symbols, bitmap images and simple graphical interfaces across 4,032 monochrome pixels.

PCD8544 Controller

Uses the established PCD8544 LCD controller found in Nokia 5110-style graphic displays.

Serial SPI Interface

Uses a simple serial connection with clock, data, chip-select and control signals.

Monochrome Graphics

Suitable for compact menus, status screens, sensor values, icons and basic animations.

LED Backlight

Integrated display backlighting helps make content visible in dim environments; backlight wiring depends on board version.

Low-Power Display

The PCD8544 design is intended for low-power applications, making it useful in portable and embedded electronics.

Technical Specifications

Product Type 84×48 monochrome graphic LCD module
Display Resolution 84 × 48 pixels
Display Controller PCD8544 (module variant should be checked)
Display Type Monochrome graphic LCD
Communication Interface Serial SPI-compatible interface
Controller Logic Supply 2.7V–3.3V (PCD8544 specification)
Backlight LED backlight; control/polarity may vary by board
Typical Interface Pins RST, CE/CS, DC, DIN, CLK, VCC, LIGHT/BL, GND
Pixel Arrangement 84 columns × 48 rows

Compatible Devices and Controllers

  • Arduino Uno, Nano and Mega when connected with suitable 3.3V-compatible signal levels.
  • ESP32 and ESP8266 development boards using SPI-compatible GPIO connections.
  • Raspberry Pi and other single-board computers with suitable SPI wiring and voltage compatibility.
  • Other microcontrollers that support SPI or software-driven serial communication.

Applications

  • Sensor reading and measurement displays.
  • Compact device menus and status indicators.
  • Robotics dashboards and embedded control panels.
  • Portable, battery-powered electronics prototypes.
  • Pixel graphics, icons and simple retro-style games.
  • Arduino and STEM display programming exercises.

Connection and Setup Guide

  1. Identify the exact pin labels on your module. Common labels are RST, CE/CS, DC, DIN, CLK, VCC, LIGHT/BL and GND.
  2. Connect GND to controller ground and supply the display logic from a regulated 2.7V–3.3V source unless the exact breakout board documentation confirms additional regulation or level shifting.
  3. Connect DIN to SPI MOSI, CLK to SPI SCK, and connect CE/CS, DC and RST to suitable controller GPIO pins.
  4. Connect the backlight pin according to the board’s own pinout and current requirements. Do not assume its polarity is identical across variants.
  5. Install a compatible PCD8544/Nokia 5110 display library, configure the pins and initialise the display in your sketch.
  6. Adjust display contrast in software if the text appears too faint or too dark.

Important Before Buying

  • Voltage caution: The PCD8544 controller logic supply is specified at 2.7V–3.3V. Do not assume the module accepts 5V logic just because it is advertised for Arduino. Confirm that the specific breakout has level shifting or other protection before connecting 5V signals.
  • Backlight: Backlight pin arrangement and polarity can differ between board variants. Check the PCB labels or supplier documentation before applying power.
  • Pinout: Verify the module’s printed pin labels; wiring order can vary between manufacturers.
  • Controller and cables: This listing is for the display module. A microcontroller board, jumper wires and other accessories are not confirmed as included.
  • Display type: This is a monochrome graphic LCD, not a colour TFT or touchscreen.

Frequently Asked Questions

What is the resolution of this 5110 LCD display?

It has an 84 × 48 pixel monochrome display area, giving you 4,032 individually addressable pixels.

Which controller does the Nokia 5110 display use?

The standard Nokia 5110-style display uses the PCD8544 LCD controller.

Does it support SPI communication?

Yes. The PCD8544 communicates with a microcontroller through a serial interface commonly used as SPI.

Can I use this display with Arduino Uno?

Yes, with suitable wiring and a compatible PCD8544 library. Make sure the display’s logic inputs are not exposed to 5V signals unless the exact module includes appropriate level shifting.

Can I connect it directly to a 5V Arduino?

Do not assume direct 5V logic compatibility. The PCD8544 controller is specified for 2.7V–3.3V logic supply. Use appropriate level shifting unless the specific breakout board documentation confirms 5V-tolerant inputs.

Can it display graphics and icons?

Yes. It is a graphic LCD and can show text, icons, bitmap images, menus and simple animations within its 84 × 48 pixel area.

Does the module have a backlight?

The listed module is described with an LED backlight. Check the board’s LIGHT/BL pin label and polarity before connecting it, as breakout designs can differ.

Is this a colour touchscreen?

No. It is a monochrome graphic LCD without touch input.

Why Buy from PcGuy Computers?

  • Shop electronics and STEM components from one place.
  • Product information focused on practical setup and compatibility.
  • Local order assistance for customers in Pakistan.
  • Support with product selection before you place an order.

Buy 84×48 5110 LCD Display Module in Pakistan

Order the 84×48 5110 LCD Display Screen Module from PcGuy Computers for Arduino displays, sensor dashboards, robotics and DIY embedded projects. Confirm the board’s voltage requirements and pinout before connecting it to your controller.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “84×48 5110 LCD Display Screen Module”

Your email address will not be published. Required fields are marked *