Keyestudio KS0059 8 Channel 5V Relay Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Keyestudio KS0059 is an 8-channel 5V electromechanical relay module for Arduino and compatible automation projects. It features active-HIGH TTL control, individual relay LEDs and COM/NO/NC contacts for switching suitable external circuits.
- Brand / Model: Keyestudio KS0059
- Channels: 8 independent relays
- Relay Voltage: 5V
- Control: TTL, active HIGH
- Contacts: COM / NO / NC
- Rated Load: 10A at 250VAC / 125VAC / 30VDC / 28VDC (manufacturer ratings)
- Rated Through-Current: 10A NO / 5A NC
- Maximum Switching Voltage: 250VAC / 30VDC
- Contact Actuation Time: Less than 10ms
- Indicators: Individual LED per relay channel
₨3,300.00
4 in stock
4 in stock
Description
The Keyestudio KS0059 8 Channel 5V Relay Module is an eight-channel electromechanical switching board for Arduino, microcontroller and automation projects. Each channel has an independent control input, HIGH-level TTL triggering, an LED status indicator and COM/NO/NC relay contacts. It lets a low-voltage controller operate compatible external circuits without routing the load current through its GPIO pins.
Key Features
8 Independent Relay Channels
Control up to eight separate circuits using individual channel inputs from a compatible microcontroller or control system.
5V Electromechanical Relays
Uses 5V relay coils for switching compatible external AC or DC loads within the applicable contact ratings.
Active HIGH TTL Trigger
Keyestudio specifies HIGH-level activation. A suitable HIGH control signal energises the corresponding relay; LOW releases it.
COM, NO and NC Contacts
Each channel provides changeover contacts, giving flexibility to select a normally open or normally closed circuit arrangement.
Individual LED Indicators
Each relay channel has a status LED to help visually check relay activation during setup and troubleshooting.
Arduino Automation Projects
Suitable for compatible microcontroller-controlled lighting, pumps, solenoids, fans, equipment switching and multi-device automation.
Eight Independently Controlled Channels
The KS0059 contains eight separate electromechanical relays, each operated through its own control input. This makes it useful when several external circuits need to be switched independently from one controller. For example, an Arduino project can operate lighting, a pump, a fan or a solenoid according to sensor readings, timers, buttons or other programmed conditions.
5V Relay Operation and Active HIGH Triggering
The module uses 5V electromechanical relays and TTL control inputs. Keyestudio specifies an active HIGH trigger: applying an appropriate HIGH-level signal to a channel input energises that relay, while LOW releases it. This differs from relay boards that use active-LOW inputs, so make sure your control code matches this module’s trigger behaviour.
The relay board’s 5V supply must have sufficient current capacity for the intended operating condition, especially when several or all eight relays may be energised together. Do not assume a microcontroller’s onboard 5V output can safely power the complete relay module.
COM, NO and NC Switching Contacts
Each relay provides three changeover terminals:
- COM (Common): The common switching connection.
- NO (Normally Open): Disconnected from COM while the relay is inactive; connected to COM when the relay energises.
- NC (Normally Closed): Connected to COM while the relay is inactive; disconnected when the relay energises.
This lets a project choose whether its external circuit should be open or closed while the relay is not energised.
Relay Contact Ratings
Keyestudio specifies the following contact load ratings:
| 250VAC | Up to 10A |
|---|---|
| 125VAC | Up to 10A |
| 30VDC | Up to 10A |
| 28VDC | Up to 10A |
| Rated through-current | 10A NO / 5A NC |
| Maximum switching voltage | 250VAC / 30VDC |
These are manufacturer relay-contact ratings under applicable conditions. They should not automatically be treated as guaranteed continuous PCB-level limits for every load or installation. Actual safe switching capacity depends on load type, contact configuration, wiring, enclosure, switching frequency and electrical conditions.
Individual Relay Status LEDs
Each channel has an LED indicator that provides a visual indication of relay operation. This is useful during initial testing and fault-finding because you can check whether a control command is activating the expected channel.
Arduino and Microcontroller Automation
With suitable control signals, the KS0059 can be integrated into projects where a microcontroller switches external circuits in response to sensor readings, timers, buttons or commands. Example applications include:
- Temperature sensor controlling a fan or heater circuit
- Soil-moisture sensor controlling an irrigation pump
- Water-level sensor controlling a pump
- PIR motion sensor controlling lighting
- Light sensor controlling an automated lighting circuit
- RTC or timer-based scheduled equipment switching
- Home, workshop and equipment automation
Pump, Solenoid, Motor and Lighting Control
The relay contacts can switch appropriately rated pumps, solenoid valves, fans, motors and lighting circuits. The external load must use its own correctly rated power source; its operating current should not be drawn through the microcontroller GPIO pins.
The KS0059 provides basic ON/OFF switching. It does not provide variable-speed motor control or electronic motor direction control by itself. Use an appropriate motor driver or MOSFET-based controller when PWM speed control or frequent electronic switching is required.
Power Supply and 3.3V Controller Compatibility
Eight electromechanical relays can draw substantially more current than a typical sensor module, particularly when multiple channels are active. Choose a suitable 5V supply with enough capacity for the board’s intended operating condition.
The KS0059 is specified for TTL control and is primarily intended for conventional 5V control systems. Do not assume direct compatibility with 3.3V GPIO devices such as ESP32, ESP8266 or Raspberry Pi without confirming that their HIGH output level meets the module’s input requirements. A suitable transistor, buffer or logic-level interface may be needed.
Isolation and Load Protection
The relay contacts provide switching separation between the contact side and the low-voltage control circuit. However, the supplied specifications do not confirm optocoupler isolation or complete galvanic isolation throughout the module. Do not treat the board as optically isolated unless the exact hardware revision confirms that feature.
Motors, pumps, solenoids and other inductive loads can produce startup currents and voltage transients that stress relay contacts. Use suitable flyback suppression, snubbers or other transient protection where appropriate for the connected load.
AC and Mains Switching Safety
Although the stated relay contact ratings include AC switching, a contact rating alone does not make a mains installation safe. Mains circuits require suitable wiring, insulation, clearances, enclosures, protection devices and installation practices. Regulated electrical work must be handled by an appropriately licensed person in accordance with applicable local requirements. For hobby and educational work, appropriately rated low-voltage loads are generally a simpler option.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Model | KS0059 |
| Product Type | 8 Channel Electromechanical Relay Module |
| Number of Channels | 8 independent channels |
| Relay Voltage | 5V |
| Control Signal | TTL |
| Trigger Mode | Active HIGH |
| Control Inputs | 8 |
| Output Contacts | COM / NO / NC |
| Rated Load | 10A at 250VAC / 125VAC / 30VDC / 28VDC |
| Rated Through-Current | 10A NO / 5A NC |
| Maximum Switching Voltage | 250VAC / 30VDC |
| Contact Actuation Time | Less than 10ms |
| Status Indication | Individual LED indicator per relay channel |
| Relay Type | Electromechanical |
| Typical Applications | Automation, lighting, pumps, motors, solenoids and equipment switching |
KS0059 8-Channel vs 4-Channel Relay Module
An 8-channel module provides twice as many independently controlled relay outputs as a conventional 4-channel board. The KS0059 is useful when a project needs to switch several devices from one controller. For smaller projects that require only one, two or four switched circuits, a lower-channel-count board may be a more compact choice.
Electromechanical Relay vs Solid State Relay
The KS0059 uses electromechanical relays with physical switching contacts. These can switch suitable AC and DC loads and provide physical contact separation when open, but contain moving components and have finite mechanical and contact life. Solid state relays use semiconductor switching and may suit silent or frequent switching applications, but their AC/DC load compatibility and switching characteristics differ.
What’s Included?
- 1 × Keyestudio KS0059 8 Channel 5V Relay Module
Arduino boards, controllers, power supplies, wiring and external loads are separately required unless specifically included in the supplied bundle.
Who Is the Keyestudio KS0059 For?
- Arduino and microcontroller users
- Electronics hobbyists and DIY builders
- Robotics and automation projects
- Students and STEM learning activities
- Home and workshop automation
- Irrigation and hydroponics projects
- Equipment control prototypes
Frequently Asked Questions
How many relays does the Keyestudio KS0059 have?
It has eight independently controlled electromechanical relay channels, each with its own control input.
What voltage does the KS0059 relay module use?
The module uses 5V electromechanical relays. Its 5V supply should have sufficient current capacity for the number of relays that may be energised at the same time.
Is the KS0059 active HIGH or active LOW?
Keyestudio specifies active HIGH triggering. An appropriate HIGH-level signal activates the corresponding relay; LOW releases it.
Does each relay provide COM, NO and NC contacts?
Yes. Each relay has changeover contacts: COM is the common terminal, NO is open while the relay is inactive, and NC is connected to COM while the relay is inactive.
What are the relay contact ratings?
The supplied specifications state 10A at 250VAC, 125VAC, 30VDC and 28VDC, with rated through-current of 10A for NO and 5A for NC. Actual safe switching capacity depends on the load and installation conditions.
Does every channel have an LED indicator?
Yes. Each relay channel has an LED status indicator to help show relay activation.
Can I use this module with Arduino?
Yes. It is designed for microcontroller control and can be operated using suitable Arduino digital outputs and the active-HIGH trigger logic.
Can all eight relays be controlled separately?
Yes. Each relay has an individual control input, allowing the controller to operate each channel independently.
Can it switch pumps and solenoid valves?
It can switch compatible pumps and solenoid valves when their voltage, current and startup characteristics are within the applicable ratings. Use suitable power supplies, wiring and transient suppression for inductive loads.
Can it control motor speed?
No. The relay provides ON/OFF switching only. Variable-speed control requires an appropriate motor driver or electronic controller.
Can I power all eight relays from an Arduino 5V pin?
Do not assume the Arduino 5V pin has enough available current. Check the module’s supply requirements and use a suitably rated 5V supply for the intended number of active relays.
Is it directly compatible with ESP32 or Raspberry Pi?
Direct compatibility is not guaranteed by the supplied specifications. These controllers use 3.3V GPIO, so confirm the module’s HIGH-level input requirement and use a suitable buffer or interface if needed.
Is the KS0059 opto-isolated?
The supplied Keyestudio specifications do not confirm optical isolation. Do not assume the board includes optocouplers or complete galvanic isolation.
Can it switch 240V mains electricity?
The stated contact ratings include 250VAC, but safe mains switching requires suitable wiring, enclosure, clearances and protection. Regulated electrical work should be performed by an appropriately licensed person.
Why Buy from PcGuy Computers?
| Pakistan-focused support | Product guidance for electronics and automation customers in Pakistan. |
|---|---|
| Pakistan-wide shipping options | Shipping options are available subject to destination and service coverage. |
| Related electronics range | Explore Arduino-compatible boards, Keyestudio modules, sensors and switching components. |
| Practical product guidance | Product information to help plan relay selection, controller compatibility and project requirements. |
Buy the Keyestudio KS0059 8 Channel 5V Relay Module from PcGuy Computers in Pakistan for multi-channel Arduino switching, automation, lighting, pumps, solenoids and equipment-control projects.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.