Keyestudio KEYBOT Coding Robot RJ11 Control Board Kit

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the Keyestudio KS0384 KEYBOT Coding Robot RJ11 Control Board Kit for Arduino-based robot car development and STEM projects. It combines an ATmega328P-AU controller with a TB6612FNG dual motor driver, eight RJ11 sensor sockets, two servo interfaces, HC-06 Bluetooth port and onboard passive buzzer. Includes acrylic mounting plates, hardware and a 50cm USB cable. Motors, sensors and Bluetooth module are sold separately.

  • Brand: Keyestudio
  • Model: KS0384
  • Controller: ATmega328P-AU / UNO R3 compatible
  • Motor Driver: TB6612FNG, dual DC motor outputs
  • Sensor Connections: 8 × RJ11 6P6C sockets
  • Expansion: 2 servo interfaces and HC-06-compatible port
  • Input Voltage: DC 7–12V
  • Included: Acrylic plates, mounting hardware and 50cm USB cable
  • Note: Motors, sensors and HC-06 module not included

₨7,700.00

7 in stock

7 in stock

Description

The Keyestudio KS0384 KEYBOT Coding Robot RJ11 Control Board Kit is an Arduino UNO R3-compatible robotics controller kit designed for programmable robot cars and DIY electronics projects. It combines an ATmega328P-AU microcontroller with a TB6612FNG dual DC motor driver, eight RJ11 sensor/module sockets, two servo interfaces, an HC-06-compatible Bluetooth port and an onboard passive buzzer. The kit also includes acrylic mounting plates, hardware and a USB programming cable.

Integrated Arduino and Motor Control

The KS0384 combines an UNO R3-compatible control board and a dual motor driver on one PCB. Its ATmega328P-AU main controller runs Arduino-compatible programs, while the TB6612FNG driver operates two DC motors through the MA and MB outputs. This integrated layout reduces the need for separate controller and motor-driver boards in compact robot-car builds.

ATmega328P-AU Controller

Arduino UNO R3-compatible control platform for coding, sensor input and robotics experiments.

TB6612FNG Dual Motor Driver

Drive two compatible DC motors and control their direction and speed independently.

Eight RJ11 Sockets

Connect compatible external sensors and modules through convenient 6P6C RJ11 cables.

Two Servo Interfaces

Connect compatible servo motors to the dedicated D9 and D10 control interfaces.

HC-06 Bluetooth Port

Add a compatible HC-06 module for wireless serial communication and remote-control projects.

Onboard Passive Buzzer

Generate programmable tones and audio feedback through the buzzer connected to D13.

Dual DC Motor Drive with TB6612FNG

The onboard TB6612FNG motor driver provides two motor connections labelled MA and MB. The controller uses D4 and D7 for motor direction, while D5 and D6 provide PWM speed control. The manufacturer’s motor-drive specification is 1.2A average and 3.2A peak. Actual motor selection must stay within the driver’s electrical and thermal limits.

Eight RJ11 Sensor and Module Connections

The eight 6P6C RJ11 sockets expose groups of digital and analogue control pins with power connections for compatible Keyestudio modules. This makes supported sensor connections simpler than wiring every signal individually. Check module pin assignments and voltage compatibility before connecting third-party hardware.

  • D3 and D8
  • D9 and D10
  • D11
  • D12
  • D2 and A0
  • A1, A2 and A3
  • A4 and A5
  • A6 and A7

Bluetooth and Servo Expansion

A dedicated Bluetooth interface is designed for the HC-06 Bluetooth module. The module is an optional add-on and is not included in the KS0384 kit package list. The Bluetooth connector has a fixed orientation, so install a compatible module in the correct direction and use the small slide switch to manage Bluetooth serial communication.

Two servo interfaces are provided, controlled through D9 and D10. These can be used for compatible servo-based mechanisms such as sensor brackets or small moving parts in a robot project.

Switches, Reset and Buzzer

The board includes a large slide switch for external power control, a smaller switch for Bluetooth serial communication and a reset button. An onboard passive buzzer connected to D13 provides sound output for alerts, tones and coding exercises.

Arduino Programming and Robot Car Projects

The ATmega328P controller can be programmed using the Arduino IDE through the USB connection. The onboard ATmega16U2-MU handles USB-to-serial communication. The board can form the control centre of a two-motor robot car when used with compatible motors, a chassis, power source and external sensors.

  • Two-motor forward, reverse and turning control
  • PWM motor speed experiments
  • Obstacle-avoidance projects using a compatible distance sensor
  • Line-following experiments with a compatible tracking sensor
  • Bluetooth serial control after adding a compatible HC-06 module
  • Servo positioning and sensor-mount projects
  • STEM, classroom and DIY robotics exercises

Technical Specifications

Brand Keyestudio
Model KS0384
Product Type KEYBOT Coding Robot Control Board Kit
Main Control Chip ATmega328P-AU
Motor Driver Chip TB6612FNG
USB-to-Serial Chip ATmega16U2-MU
Input Voltage DC 7–12V
Motor Drive Current 1.2A average / 3.2A peak (manufacturer specification)
Standby Current 47mA
Motor Outputs 2 × DC motor connections (MA and MB)
Motor Direction Pins D4 (Motor A) and D7 (Motor B)
Motor Speed Pins D5 (Motor A) and D6 (Motor B), PWM
RJ11 Sockets 8 × 6P6C sensor/module sockets
Servo Interfaces 2 × interfaces, D9 and D10
Bluetooth Interface HC-06 compatible; module sold separately
Buzzer Onboard passive buzzer, D13
Controls Power switch, Bluetooth serial switch and reset button
Board Dimensions 105 × 64 × 18mm
Programming Arduino IDE compatible

Package Contents

The official KS0384 package list specifies:

  • 1 × KEYBOT control board
  • 2 × acrylic plates
  • 4 × M3 × 15mm double-pass copper pillars
  • 8 × M3 × 10mm inner hex screws
  • 1 × 50cm blue USB cable

Important: DC motors, robot chassis, sensors, servo motors, HC-06 Bluetooth module, external power supply and other expansion hardware are not listed as included in this control board kit. Add compatible parts separately for a complete robot car.

Why Buy from PcGuy Computers?

PcGuy Computers offers Arduino-compatible boards, robotics controllers, sensors, modules and practical electronics components for students, makers and DIY projects. The KS0384 combines motor control and sensor connections in one board for building and programming robot-car projects.

Buy the Keyestudio KS0384 KEYBOT Coding Robot RJ11 Control Board Kit in Pakistan from PcGuy Computers for Arduino robotics, motor-control experiments and STEM learning.

Frequently Asked Questions

What is the Keyestudio KS0384 KEYBOT board?

It is an Arduino UNO R3-compatible robotics control board kit with an ATmega328P-AU controller, TB6612FNG dual motor driver, eight RJ11 sockets and expansion interfaces for robot-car projects.

Does the board include an Arduino UNO?

The UNO R3-compatible controller is integrated into the KEYBOT board. A separate Arduino UNO board is not required for its normal operation.

How many DC motors can it control?

The integrated TB6612FNG driver provides two motor outputs, labelled MA and MB, for two compatible DC motors.

Can I control motor speed?

Yes. PWM speed control is provided on D5 for motor A and D6 for motor B. Direction is controlled through D4 and D7 respectively.

How many RJ11 ports are available?

The board has eight 6P6C RJ11 sockets for compatible external sensors and modules.

Does the kit include RJ11 cables?

The official KS0384 package list specifies a 50cm USB cable, acrylic plates, copper pillars and screws. It does not list RJ11 sensor cables as included.

Can I connect an HC-06 Bluetooth module?

Yes. The board has a dedicated HC-06-compatible Bluetooth interface. The HC-06 module itself is not included in the listed package contents.

Are servo motors supported?

Yes. Two servo interfaces are provided, controlled through D9 and D10. Servo motors are not listed as included.

Does it have a built-in buzzer?

Yes. An onboard passive buzzer is connected to D13 and can be controlled by your program.

What input voltage is required?

Keyestudio specifies a DC 7–12V input range. Use a suitable supply and observe the requirements of connected motors and modules.

Can I program the KS0384 with Arduino IDE?

Yes. The ATmega328P-AU controller is Arduino-compatible and the board uses an ATmega16U2-MU USB-to-serial chip for computer programming.

Are motors and sensors included?

No motors or sensors are listed in the official KS0384 control board kit contents. They must be sourced separately for a complete robot car project.

Can I build an obstacle-avoidance robot with this board?

Yes. Connect a compatible distance sensor through the appropriate interface and program the controller to respond to detected obstacles. The sensor and robot chassis are additional components.

Is the KS0384 suitable for STEM learning?

Yes. It provides practical exercises in Arduino programming, motor control, sensor connections, PWM and robotics system design.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio KEYBOT Coding Robot RJ11 Control Board Kit”

Your email address will not be published. Required fields are marked *