JSN-SR04T Waterproof Ultrasonic Transducer Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
JSN-SR04T waterproof ultrasonic transducer module for non-contact distance measurement, water-level monitoring, robotics and automation projects. Includes a separate sensor probe and control board. Check the board revision for exact voltage and range specifications.
₨3,080.00
49 in stock
49 in stock
Description
JSN-SR04T Waterproof Ultrasonic Transducer Sensor Module enables non-contact distance measurement using a separate sealed ultrasonic probe and control board. It is suitable for Arduino, robotics, water-level monitoring and automation projects where the sensing head may be exposed to moisture. The control electronics still need suitable protection.
Key Features
The separate transducer is designed for distance sensing in damp or wet locations when installed correctly.
Measures the distance to a target using reflected ultrasonic sound waves without physical contact.
The probe connects to an electronic control module, allowing the board to be mounted away from the sensing point.
Digital trigger and echo signals make it suitable for microcontroller-based measurement projects.
Can be used for obstacle detection, proximity sensing and automated distance-monitoring builds.
Useful for non-contact level estimation in tanks and containers, subject to suitable mounting and target-surface conditions.
Technical Specifications
- Model: JSN-SR04T
- Sensor type: Waterproof ultrasonic distance transducer
- Measurement method: Non-contact ultrasonic ranging
- Interface: VCC, TRIG, ECHO and GND on the common pulse-output board
- Construction: Separate transducer probe and control PCB
- Version: Not confirmed on the supplied product listing
How It Works
A trigger pulse starts an ultrasonic measurement. The probe emits ultrasonic sound and listens for its reflection. The control board provides an echo pulse whose duration represents the measured distance. A compatible controller can read this pulse and calculate distance.
Applications
- Water tank and container level monitoring
- Arduino and compatible microcontroller projects
- Robotics and obstacle detection
- Outdoor distance-monitoring prototypes
- Automatic control and IoT experiments
Connection & Usage Notes
The common pulse-output board uses VCC, TRIG, ECHO and GND connections. Check the markings and documentation for your exact revision before powering it. Some controller boards use 3.3V logic, so verify echo-signal compatibility and use suitable level shifting where required. Mount the probe facing the target and keep the control PCB protected from water.
Why Buy from PcGuy Computers?
Frequently Asked Questions
What is the JSN-SR04T sensor used for?
It is used for non-contact ultrasonic distance measurement, including water-level monitoring, robotics and obstacle-detection projects.
Is the JSN-SR04T probe waterproof?
The separate transducer probe is designed for wet environments. The control PCB and its connections should be kept protected from moisture.
Can I use this module with Arduino?
Yes. The common pulse-output version uses trigger and echo signals and can be interfaced with Arduino after checking the board revision and logic levels.
Can it measure water tank level?
It can be mounted above a tank to estimate the distance to the water surface. Mounting, condensation, surface movement and the sensor’s minimum range can affect readings.
What are the VCC, TRIG, ECHO and GND pins?
They are the power input, measurement trigger input, echo timing output and ground connection respectively on the common pulse-output board. Follow the labels on your board.
What is the measurement range?
It depends on the JSN-SR04T revision. Common V2.0 boards are specified around 25–450cm, while V3.0 versions may have a different range. Check the exact revision before designing around a range.
Does the control board also need waterproofing?
Yes. Do not assume the control PCB is waterproof just because the transducer probe is sealed. Place the board in a suitable protected enclosure.
Does it work directly with a 3.3V microcontroller?
Compatibility depends on the specific board revision and echo output voltage. Check the output level and use a suitable logic-level interface if the controller input is not 5V tolerant.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.