JSN-SR04T Waterproof Ultrasonic Transducer Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

JSN-SR04T waterproof ultrasonic transducer module for non-contact distance measurement, water-level monitoring, robotics and automation projects. Includes a separate sensor probe and control board. Check the board revision for exact voltage and range specifications.

₨3,080.00

49 in stock

49 in stock

Description

JSN-SR04T Waterproof Ultrasonic Transducer Sensor Module enables non-contact distance measurement using a separate sealed ultrasonic probe and control board. It is suitable for Arduino, robotics, water-level monitoring and automation projects where the sensing head may be exposed to moisture. The control electronics still need suitable protection.

Key Features

Waterproof Sensor Probe

The separate transducer is designed for distance sensing in damp or wet locations when installed correctly.

Non-Contact Measurement

Measures the distance to a target using reflected ultrasonic sound waves without physical contact.

Separate Control Board

The probe connects to an electronic control module, allowing the board to be mounted away from the sensing point.

Trigger & Echo Interface

Digital trigger and echo signals make it suitable for microcontroller-based measurement projects.

Robotics & Automation

Can be used for obstacle detection, proximity sensing and automated distance-monitoring builds.

Water-Level Projects

Useful for non-contact level estimation in tanks and containers, subject to suitable mounting and target-surface conditions.

Technical Specifications

  • Model: JSN-SR04T
  • Sensor type: Waterproof ultrasonic distance transducer
  • Measurement method: Non-contact ultrasonic ranging
  • Interface: VCC, TRIG, ECHO and GND on the common pulse-output board
  • Construction: Separate transducer probe and control PCB
  • Version: Not confirmed on the supplied product listing
Version note: JSN-SR04T boards are sold in different revisions. Common V2.0 specifications are approximately 25–450cm range at 5V, while V3.0 variants may support a shorter blind zone and a longer range with different electrical limits. Confirm the exact PCB revision before relying on voltage, range, current or timing figures. The waterproof rating of the probe does not mean the control board is waterproof.

How It Works

A trigger pulse starts an ultrasonic measurement. The probe emits ultrasonic sound and listens for its reflection. The control board provides an echo pulse whose duration represents the measured distance. A compatible controller can read this pulse and calculate distance.

Applications

  • Water tank and container level monitoring
  • Arduino and compatible microcontroller projects
  • Robotics and obstacle detection
  • Outdoor distance-monitoring prototypes
  • Automatic control and IoT experiments

Connection & Usage Notes

The common pulse-output board uses VCC, TRIG, ECHO and GND connections. Check the markings and documentation for your exact revision before powering it. Some controller boards use 3.3V logic, so verify echo-signal compatibility and use suitable level shifting where required. Mount the probe facing the target and keep the control PCB protected from water.

Why Buy from PcGuy Computers?

Pakistan-Wide Order SupportHelp with Product SelectionClear Product InformationElectronics & Robotics ComponentsAfter-Sales Order Assistance

Frequently Asked Questions

What is the JSN-SR04T sensor used for?

It is used for non-contact ultrasonic distance measurement, including water-level monitoring, robotics and obstacle-detection projects.

Is the JSN-SR04T probe waterproof?

The separate transducer probe is designed for wet environments. The control PCB and its connections should be kept protected from moisture.

Can I use this module with Arduino?

Yes. The common pulse-output version uses trigger and echo signals and can be interfaced with Arduino after checking the board revision and logic levels.

Can it measure water tank level?

It can be mounted above a tank to estimate the distance to the water surface. Mounting, condensation, surface movement and the sensor’s minimum range can affect readings.

What are the VCC, TRIG, ECHO and GND pins?

They are the power input, measurement trigger input, echo timing output and ground connection respectively on the common pulse-output board. Follow the labels on your board.

What is the measurement range?

It depends on the JSN-SR04T revision. Common V2.0 boards are specified around 25–450cm, while V3.0 versions may have a different range. Check the exact revision before designing around a range.

Does the control board also need waterproofing?

Yes. Do not assume the control PCB is waterproof just because the transducer probe is sealed. Place the board in a suitable protected enclosure.

Does it work directly with a 3.3V microcontroller?

Compatibility depends on the specific board revision and echo output voltage. Check the output level and use a suitable logic-level interface if the controller input is not 5V tolerant.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “JSN-SR04T Waterproof Ultrasonic Transducer Sensor Module”

Your email address will not be published. Required fields are marked *