AB11 12V DC Peristaltic Dosing Pump Blue

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the AB11 12V DC Peristaltic Dosing Pump Blue for controlled liquid transfer, dispensing and DIY automation projects. Its roller-based pumping action moves liquid through flexible tubing, making it suitable for compatible Arduino and ESP32 systems, hydroponic setups and aquarium dosing projects.

  • Model: AB11
  • Operating Voltage: 12V DC
  • Colour: Blue
  • Pump Type: Peristaltic Dosing Pump
  • Fluid Path: Flexible Pump Tubing
  • Control: External DC Switching / Motor Driver
  • Applications: Liquid Dosing, Dispensing & Transfer

₨4,840.00

2 in stock

2 in stock

Description

AB11 12V DC Peristaltic Dosing Pump – Blue is a compact pump for controlled liquid transfer, dispensing and DIY dosing systems. Its peristaltic mechanism moves liquid by compressing flexible tubing, keeping the fluid path inside the tube rather than passing through the motor or gearbox. The 12V DC design makes it suitable for compatible Arduino and ESP32 projects, hydroponic setups, aquarium dosing and other low-voltage automation builds.

Key Features

12V DC Operation

Designed for a 12V DC supply, making it suitable for integration into compatible low-voltage electronics and automation projects.

Peristaltic Pumping Action

Rotating rollers compress flexible tubing to move liquid through the pump in a controlled, continuous pumping action.

Separate Fluid Path

The liquid stays inside the pump tubing instead of flowing through the motor or gearbox, helping isolate the fluid from the drive mechanism.

Blue Housing

This listing is the Blue AB11 variant, useful for identifying a particular pump in colour-coded or multi-channel dosing projects.

External Electronic Control

Can be switched using a suitably rated MOSFET, transistor, relay or motor driver controlled by an Arduino, ESP32 or other controller.

Timed Dosing Projects

Run the pump for a measured duration and calibrate the delivered volume to build repeatable DIY liquid-dosing routines.

How the Peristaltic Pump Works

Inside the pump head, rotating rollers squeeze a flexible tube in sequence. This pushes the liquid ahead of the rollers while the released section of tubing draws more liquid into the pump. The transferred liquid primarily contacts the inside of the tube, not the motor or gearbox.

Applications

  • Automated liquid dosing and dispensing
  • Hydroponic nutrient and compatible solution dosing
  • DIY aquarium dosing systems
  • Arduino and ESP32 liquid-handling projects
  • Timed fluid transfer and plant-watering prototypes
  • Educational, laboratory and electronics experiments
  • Multi-channel dosing systems using separate pumps

Arduino & ESP32 Control

An Arduino or ESP32 can control the pump through an appropriately rated external switching device. Use a separate 12V supply for the pump and connect the controller to a suitable MOSFET, transistor, relay or motor driver input. Do not connect the pump motor directly to a microcontroller GPIO pin. Select the power supply and switching hardware according to the pump’s actual current requirements, and use suitable suppression for the inductive motor load.

Product Specifications

Model AB11
Product Type Peristaltic Dosing Pump
Operating Voltage 12V DC
Colour Blue
Pump Mechanism Roller Compression of Flexible Tubing
Fluid Path Flexible Pump Tubing
Control External DC Switching / Motor Driver
Typical Uses Dosing, Dispensing, Liquid Transfer & Automation

Flow Rate & Dosing Calibration

Do not assume a fixed flow rate or dosing accuracy without testing the individual pump. Delivered volume can vary with tubing condition, supply voltage, liquid viscosity, suction height, discharge conditions and the specific installation.

  1. Install the pump with the intended tubing and liquid.
  2. Prime the tubing before measuring.
  3. Run the pump for a known period into a measuring container.
  4. Measure the delivered volume and calculate the approximate flow rate.
  5. Use the measured result to set timed dosing intervals.

Recheck calibration if the tubing is replaced, becomes worn or operating conditions change.

Tubing & Liquid Compatibility

The peristaltic design keeps liquid inside the flexible tubing, but it does not make the pump compatible with every fluid. Confirm that the supplied tube material is suitable for the liquid before use. Do not pump aggressive chemicals, solvents, concentrated acids or alkalis unless tubing compatibility has been established.

Power & Installation Notes

  • Use a regulated 12V DC source with adequate current capacity.
  • Keep the pump motor supply separate from the controller’s GPIO output.
  • Use a correctly rated switching device and appropriate wiring.
  • Secure inlet and outlet tubing to reduce leaks or accidental disconnection.
  • Test the complete setup with water before using the intended liquid.

This general-purpose pump should not be assumed to be food-grade, medical-grade or suitable for sterile applications unless the exact pump and tubing have the relevant certification.

Why Buy from PcGuy Computers?

✓ Pakistan-Wide Order Support
✓ Help with Product Selection
✓ Clear Product Information
✓ Electronics & Robotics Components
✓ After-Sales Order Assistance

Frequently Asked Questions

What voltage does the AB11 Blue pump require?

It is designed for a 12V DC power supply.

What type of pump is the AB11?

It is a peristaltic pump that moves liquid by progressively compressing flexible tubing with rotating rollers.

Can I control this pump with Arduino?

Yes. Use an appropriately rated external MOSFET, transistor, relay or motor driver and a suitable 12V supply. Do not power the pump directly from an Arduino GPIO pin.

Is it compatible with ESP32?

It can be used in ESP32 projects through a suitable external switching circuit. The pump needs its own appropriately rated 12V power source.

Can I use it for hydroponic nutrient dosing?

It can be incorporated into DIY hydroponic dosing systems. Confirm that the tubing is compatible with the nutrient solution and calibrate the delivered volume.

Can it be used for aquarium dosing?

Yes, for compatible liquids in a properly tested DIY aquarium dosing setup. Measure the actual output before relying on timed doses.

What is the flow rate of this pump?

A verified flow-rate figure is not specified for this listing. Actual output depends on the pump, tubing, liquid and operating conditions, so measure and calibrate your individual unit.

Does the liquid pass through the motor?

No. In a peristaltic pump, the liquid travels inside the flexible tubing and does not normally contact the motor or gearbox.

Can it pump any type of chemical?

No. Check the tubing’s chemical compatibility before transferring chemicals, solvents or aggressive liquids.

Is the AB11 Blue pump food-grade or medical-grade?

Do not assume food-grade, medical-grade or sterile suitability unless the exact pump and tubing are supplied with the required certifications.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “AB11 12V DC Peristaltic Dosing Pump Blue”

Your email address will not be published. Required fields are marked *