650nm Copper Head Red Dot Laser Diode Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

Ā 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the 650nm Copper Head Red Dot Laser Diode Module in Pakistan for suitable optical alignment, robotics and DIY electronics projects. It produces a continuous visible red dot and is listed for a 3V–5V DC supply. Use an external driver circuit and follow laser eye-safety precautions.

  • Product Type: Red dot laser diode module
  • Wavelength: Approximately 650nm
  • Output: Visible red dot, continuous
  • Operating Voltage: 3V–5V DC (verify exact variant)
  • Housing: Copper-head metal housing
  • Output Power: Not confirmed for this exact stock variant
  • Control: External driver/switching circuit required
  • Applications: Optical alignment, robotics, STEM and DIY electronics

Laser safety: Never look into the beam or point it at people, animals, aircraft, vehicles or reflective surfaces. Not a toy.

₨660.00

22 in stock

22 in stock

Description

The 650nm Copper Head Red Dot Laser Diode Module is a compact visible-red laser emitter for suitable low-voltage electronics, optical experiments and alignment projects. It produces a continuous red dot and is listed for a 3V–5V DC supply. Its small copper-head housing makes it convenient to mount in compatible DIY assemblies, robotics prototypes and STEM demonstrations.

Key Features

Visible 650nm Red Beam

Emits visible red laser light at approximately 650nm for optical and alignment experiments.

Red Dot Output

Produces a focused dot-style beam for basic positioning and optical demonstration setups.

Copper-Head Housing

Compact metal-head construction helps with mounting in compatible project brackets and enclosures.

Low-Voltage DC Supply

Listed for 3V–5V DC operation. Use a regulated supply and confirm the exact module variant before powering it.

Continuous Output

Designed to emit a continuous red dot while correctly powered, rather than acting as a programmable laser scanner.

DIY Project Integration

Can be incorporated into suitable optical experiments, alignment fixtures and robotics prototypes with proper driver circuitry.

Technical Specifications

Product Type Red dot laser diode module
Wavelength Approximately 650nm
Laser Colour Visible red
Beam Output Dot / continuous output
Operating Voltage 3V–5V DC (listed module range; verify the supplied variant)
Housing Copper-head metal housing
Output Power Not independently confirmed for this exact stock variant
Operating Current Not specified for this exact stock variant
Control DC power input; external switching/driver required for microcontroller control

Compatible Controllers and Project Setups

  • Arduino projects using a suitable transistor or laser driver stage
  • ESP32 and ESP8266 projects with an external switching circuit and suitable supply
  • Raspberry Pi projects using a compatible external driver circuit
  • Low-voltage optical alignment and educational experiment setups
  • Robotics prototypes that use a visible optical reference point

The module should not be powered directly from a microcontroller GPIO pin. Use a correctly rated external supply and a suitable transistor/driver stage, with a shared ground where required by the circuit. Confirm the module’s lead polarity before connecting power.

Applications

  • Basic optical alignment and positioning experiments
  • STEM and electronics demonstrations
  • Robotics prototypes requiring a visible reference dot
  • Beam-break and photoelectric sensor experiments when paired with a suitable receiver
  • DIY optical fixtures and low-voltage electronic assemblies

Connection and Setup Guide

  1. Read the markings or supplier information for the exact module variant and confirm its rated input voltage and lead polarity.
  2. Keep the laser switched off while preparing the circuit. Mount the module securely so the beam cannot accidentally point toward people, animals, vehicles or reflective surfaces.
  3. Use a regulated DC supply within the confirmed module rating. The product listing specifies 3V–5V DC; do not exceed 5V.
  4. For Arduino, ESP32, ESP8266 or Raspberry Pi control, use a suitable external transistor/driver circuit. Do not connect the laser directly to a GPIO output.
  5. Check wiring and beam direction before applying power. Use the shortest practical test and switch off when the laser is not needed.
  6. Never look into the aperture or along the beam path, even when the dot appears dim.

Important Laser Safety and Buying Notes

  • Eye hazard: Never look directly into the laser aperture or beam. Direct or reflected exposure can injure eyes.
  • Safe direction: Never aim at people, animals, aircraft, road users, vehicles, mirrors or other reflective surfaces.
  • Output rating: The exact optical output power and laser safety class of this stock variant have not been confirmed. Do not assume it is eye-safe or treat it as a toy.
  • Supply voltage: The listing specifies 3V–5V DC. Applying a higher voltage can damage the diode. Verify the exact variant and polarity before connection.
  • GPIO protection: Do not drive the laser directly from a microcontroller pin. Use an appropriate driver circuit and supply.
  • Focus and beam size: Exact spot size, divergence and focus adjustment are not specified for this stock variant.
  • Variant differences: Housing dimensions, lead length, current draw and optical output can vary between similar-looking 650nm modules. Confirm these if your design requires exact values.
  • Supervision: Keep the module switched off and inaccessible when not in use; educational demonstrations should be supervised by a responsible adult.

Frequently Asked Questions

What colour laser does this module produce?

It produces visible red laser light at approximately 650nm with a dot-style output.

What is the operating voltage?

The product listing specifies 3V–5V DC. Confirm the exact variant and polarity before connecting it, and never exceed 5V.

Can I connect it directly to an Arduino or ESP32 GPIO pin?

No. Do not power the laser directly from a GPIO pin. Use a suitable external supply and transistor or driver circuit controlled by the microcontroller.

Does it produce a dot or a line?

This is a red dot laser module. It is not a line-laser module.

Can it be used in robotics projects?

It can be used as a visible optical reference in suitable robotics prototypes. Secure the module and ensure the beam is contained and directed away from people and reflective surfaces.

What is its optical output power and safety class?

The exact output power and safety classification of this product’s stock variant are not confirmed. Do not assume a particular class or consider it safe for direct viewing.

Can the focus or spot size be adjusted?

Focus adjustment and exact spot-size specifications are not confirmed for this listing. Check the supplied module before designing around a specific beam size.

Is this module suitable for children?

It is an electronic laser component, not a toy. Keep it secured and switched off when not in use; any educational demonstration requires responsible adult supervision and strict beam safety.

Why Buy from PcGuy Computers?

  • Electronics and STEM components for practical projects
  • Product information to help you check electrical compatibility
  • Local Pakistan ordering and customer assistance
  • Components for Arduino, robotics and DIY electronics

Buy 650nm Copper Head Red Dot Laser Diode Module in Pakistan

Order the 650nm Copper Head Red Dot Laser Diode Module from PcGuy Computers for suitable low-voltage optical, alignment and DIY electronics projects. Confirm the supply requirements and use proper laser safety precautions before operation.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “650nm Copper Head Red Dot Laser Diode Module”

Your email address will not be published. Required fields are marked *