AMG8833 IR 8×8 Infrared Camera Thermal Imager Module Example Code

0
AMG8833 IR 8×8 Thermal Imager Module Pakistan| Arduino & ESP32

AMG8833 IR 8×8 Thermal Imaging Sensor Module Guide

The AMG8833 IR 8×8 Infrared Camera Thermal Imager Module, often referred to as the Grid-EYE sensor, is a compact thermal imaging sensor capable of detecting heat signatures across an 8×8 array of infrared sensing elements. It provides temperature data for 64 individual zones, allowing microcontrollers to create basic thermal images and heat maps.

Unlike conventional cameras, the AMG8833 detects infrared radiation emitted by objects and people, making it useful for temperature monitoring, occupancy detection, motion sensing, smart home automation, robotics, and STEM education projects.

Using an I²C interface, the module can be easily connected to Arduino, ESP32, Raspberry Pi, and other development platforms while providing temperature measurements without physical contact.


Required Arduino Library

Before uploading code, install the Adafruit AMG88xx Library through the Arduino Library Manager.

Arduino Example Code

#include <Wire.h>
#include <Adafruit_AMG88xx.h>

Adafruit_AMG88xx amg;

float pixels[64];

void setup() {
  Serial.begin(9600);

  if (!amg.begin()) {
    Serial.println("AMG8833 not detected");
    while (1);
  }

  Serial.println("AMG8833 Ready");
}

void loop() {

  amg.readPixels(pixels);

  for (int i = 0; i < 64; i++) {
    Serial.print(pixels[i]);
    Serial.print(" ");
  }

  Serial.println();
  delay(1000);
}

Typical Wiring

AMG8833 VIN -> 3.3V or 5V*
AMG8833 GND -> GND
AMG8833 SDA -> Arduino SDA
AMG8833 SCL -> Arduino SCL

*Check your module specifications, as some breakout boards include onboard voltage regulation while others require 3.3V operation.

Key Features

  • 8×8 infrared thermal sensor array
  • 64 independent temperature measurement zones
  • I²C communication interface
  • Non-contact temperature sensing
  • Human presence and motion detection
  • Low power operation

Common Applications

  • Thermal imaging projects
  • Occupancy detection systems
  • Smart home automation
  • Temperature monitoring
  • Robotics and navigation
  • People counting systems
  • STEM and educational projects

Understanding the Data

The sensor returns a temperature value for each of its 64 sensing zones. These values can be displayed as a heat map on a screen, sent to a computer for visualization, or processed by a microcontroller to detect movement and temperature changes.

While the AMG8833 does not produce high-resolution thermal images like professional thermal cameras, it provides an affordable way to experiment with infrared thermal sensing and thermal imaging concepts.

Usage Tips

For best results, avoid placing the sensor near direct heat sources unless they are part of the intended application. Ensure the sensor has a clear view of the area being monitored and allow a short warm-up period after power-up for stable readings.

Leave a Reply

Your email address will not be published. Required fields are marked *