YP-05 FTDI FT232L USB Mini to TTL UART Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy the YP-05 FTDI FT232L USB Mini to TTL UART Module in Pakistan for programming, firmware uploads and serial debugging. It converts USB communication into TTL UART for compatible microcontrollers and embedded devices.
- Model: YP-05
- Chipset: FT232RL
- Interface: Mini USB to TTL UART
- Logic Voltage: Selectable 3.3V / 5V (jumper)
- Signal Pins: DTR, RXD, TX, VCC, CTS, GND
- Indicators: TX/RX activity LEDs
- Applications: Arduino programming, UART communication and serial debugging
₨1,540.00
13 in stock
13 in stock
Description
The YP-05 FTDI FT232L USB Mini to TTL UART Module is a USB-to-serial adapter for connecting a computer to microcontrollers and other devices that communicate through TTL-level UART. Built around the FT232RL USB-UART chipset, it is useful for programming, firmware uploads, serial monitoring and troubleshooting compatible boards such as Arduino Pro Mini and other embedded systems.
Key Features
Converts a computer’s USB connection into a TTL-level serial UART interface.
Connects to a computer through the board’s Mini USB port.
Supports common 3.3V and 5V logic configurations; check and set the board jumper before connecting.
Provides DTR, RXD, TX, VCC, CTS and GND connections for compatible serial devices.
Onboard transmit and receive indicators help monitor serial activity.
Useful for development boards and embedded devices without an onboard USB-to-UART interface.
Technical Specifications
| Model | YP-05 |
|---|---|
| USB-UART Chip | FT232RL |
| Module Type | USB to TTL UART converter |
| USB Connector | Mini USB |
| Serial Interface | TTL-level UART |
| Logic Voltage | Selectable 3.3V / 5V (board jumper) |
| Signal Pins | DTR, RXD, TX, VCC, CTS, GND |
| Indicators | TX and RX activity LEDs |
| Header Pitch | 2.54mm (reported for this module style) |
Compatible Devices and Controllers
- Arduino Pro Mini boards that require an external USB-to-serial adapter
- Compatible Arduino and AVR development boards with TTL UART programming pins
- ESP8266 and ESP32 boards with a compatible UART interface and correct logic voltage
- STM32 and other embedded boards that expose TTL UART pins
- UART-enabled modules, routers and serial debugging interfaces where voltage and pinout match
Applications
- Uploading sketches or firmware to compatible development boards
- Serial monitor communication and debugging
- Testing UART data transmission between a PC and embedded hardware
- Configuring and troubleshooting serial-enabled modules
- DIY electronics, robotics and STEM development projects
Connection and Setup Guide
- Install the appropriate FTDI VCP driver if your operating system does not recognise the adapter automatically.
- Connect the module to the computer using a suitable Mini USB data cable.
- Set the module’s voltage-selection jumper to match the target board’s required logic voltage (3.3V or 5V).
- Connect GND to GND, adapter TX to device RX, and adapter RX to device TX.
- Connect VCC only if the target board is intended to be powered from the adapter’s selected output.
- Use DTR where supported for automatic reset/programming; connect CTS only when the target setup uses hardware flow control.
- Select the detected serial/COM port and the baud rate required by your board or application.
Important Before Buying
- This is a TTL UART adapter, not an RS-232 voltage-level converter. Do not connect it directly to traditional RS-232 signals.
- Confirm the target device’s voltage and pinout before wiring. A matching connector does not guarantee matching signal order.
- TX and RX must be crossed between the adapter and target device, and both devices must share GND.
- Do not connect 5V logic to a 3.3V-only input. Set the jumper correctly and verify the board’s actual output levels before use.
- VCC is a power output, not a signal pin. Avoid powering a board from it if the required current exceeds the adapter’s capability.
- A Mini USB data cable is required. Cable and additional programming wires are not confirmed as included.
Frequently Asked Questions
What does the YP-05 FTDI module do?
It converts USB communication from a computer into TTL-level UART serial communication for compatible microcontrollers and embedded devices.
Does it use the FT232RL chipset?
Yes. The YP-05 module is specified with the FT232RL USB-to-UART chipset.
Does the module support both 3.3V and 5V?
This module style provides selectable 3.3V and 5V operation through a board jumper. Set it to match the target device and verify the signal voltage before connecting.
Can I program an Arduino Pro Mini with it?
Yes, it can be used with a compatible Arduino Pro Mini. Connect TX, RX and GND correctly, and use DTR for auto-reset if supported by your board.
Can it work with ESP8266 or ESP32?
It can communicate with boards exposing UART pins when the logic voltage, wiring and boot/programming requirements are compatible. Use 3.3V logic for 3.3V-only inputs.
What are the six pins on the module?
The commonly listed pins are DTR, RXD, TX, VCC, CTS and GND. Check the labels printed on your particular board before wiring.
Is this the same as an RS-232 adapter?
No. It provides TTL-level UART signals. Traditional RS-232 uses different voltage levels and requires a suitable RS-232 transceiver.
Does the package include a Mini USB cable?
The cable is not confirmed as included. Please arrange a compatible Mini USB data cable unless the product listing explicitly states otherwise.
Why Buy from PcGuy Computers?
- Practical electronics and development modules for DIY projects
- Product information focused on compatibility and setup
- Online ordering for customers across Pakistan
- Support for choosing components for your project requirements
Buy YP-05 FTDI FT232L USB Mini to TTL UART Module in Pakistan
Looking to buy a YP-05 FTDI FT232L USB Mini to TTL UART Module in Pakistan? Order online from PcGuy Computers for Arduino programming, UART communication, firmware uploads and embedded-system debugging. Check your device’s pinout and logic voltage before connecting.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.