SHT20 Temperature and Humidity Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The SHT20 Temperature and Humidity Sensor Module provides digital temperature and relative-humidity readings through an I²C interface. Designed for compatible microcontroller projects, weather-station prototypes, indoor climate monitoring and IoT applications.

  • Sensor: Sensirion SHT20
  • Measurements: Temperature and relative humidity
  • Interface: Digital I²C
  • Typical Accuracy: ±0.3°C / ±3% RH
  • Temperature Range: −40°C to +125°C (sensor IC specification)
  • Humidity Range: 0–100% RH (normal operating range 0–80% RH)
  • Sensor IC Supply: 2.1–3.6V; breakout-board input voltage not confirmed
  • Package: 1 × SHT20 Sensor Module
  • SKU: BC0000321

₨3,300.00

5 in stock

5 in stock

Description

SHT20 Digital Temperature and Humidity Sensor Module

Monitor ambient temperature and relative humidity in microcontroller and electronics projects with this SHT20-based digital sensor module. It uses the Sensirion SHT20 sensing element and communicates through a digital I²C interface, allowing a controller to read both environmental measurements over the same bus.

The SHT20 sensor IC is factory calibrated and provides a typical relative-humidity accuracy of ±3% RH and typical temperature accuracy of ±0.3°C under the manufacturer’s stated test conditions. It is suited to indoor climate monitoring, weather-station prototypes, greenhouse projects, automation and IoT experiments.

Key Features

Dual Measurement

Reads both ambient temperature and relative humidity using one sensor IC.

Digital I²C Interface

Communicates with supported microcontrollers over a two-wire I²C bus.

Factory Calibrated

The SHT20 sensing element is individually calibrated by the manufacturer.

Low Power Sensor

The SHT20 IC is designed for low-power environmental sensing applications.

Technical Specifications

Sensor Sensirion SHT20
Measurements Temperature and relative humidity
Communication Digital I²C (two-wire interface)
Typical Humidity Accuracy ±3.0% RH
Typical Temperature Accuracy ±0.3°C
Humidity Measurement Range 0–100% RH (normal operating range 0–80% RH)
Temperature Measurement Range −40°C to +125°C sensor specification
Default Resolution 12-bit RH / 14-bit temperature
Sensor IC Supply Voltage 2.1–3.6V (SHT20 IC specification; breakout-board input voltage is not confirmed)
Module PCB Details Board dimensions, pin labels and onboard regulation are not specified in the supplied listing
Package Includes 1 × SHT20 Temperature and Humidity Sensor Module
PcGuy SKU BC0000321

Accuracy figures are typical values from Sensirion’s SHT20 datasheet, tested under specified conditions; they are not guaranteed maximum errors in every environment. The sensor’s humidity response can show a reversible offset after extended exposure above 80% RH. The 2.1–3.6V figure applies to the SHT20 sensor IC, not necessarily the complete breakout module’s input pin.

Projects and Applications

  • Arduino and compatible microcontroller environmental-monitoring projects
  • ESP32-based temperature and humidity monitoring, subject to electrical compatibility
  • Indoor climate and room-condition logging
  • DIY weather-station prototypes
  • Greenhouse and growing-environment monitoring
  • Home automation and IoT experiments
  • Educational electronics, STEM and sensor-interface learning

Connection and Integration

The SHT20 sensor communicates using I²C. A typical I²C connection uses clock (SCL) and data (SDA) lines along with power and ground. However, the supplied PcGuy listing does not show the breakout board’s pin labels, onboard voltage regulation or logic-level circuitry.

  • Identify the module’s actual power, ground, SDA and SCL labels before wiring.
  • Check the breakout board’s required supply voltage and logic-level compatibility against your controller before connecting it.
  • Use an I²C-capable microcontroller and an appropriate software library or I²C driver.
  • Keep wiring and electrical connections within the limits of the sensor and breakout board.

Do not assume that the complete module accepts 5V simply because it is sold as a microcontroller module. The SHT20 sensor IC itself is specified for 2.1–3.6V; confirm the breakout-board circuit before applying power.

What’s Included

1 × SHT20 Temperature and Humidity Sensor Module.

Frequently Asked Questions

What does the SHT20 sensor module measure?

It measures ambient temperature and relative humidity. Both readings are provided digitally through the SHT20 sensor’s I²C interface.

What communication interface does the SHT20 use?

The SHT20 uses a digital two-wire I²C communication interface, with clock (SCL) and data (SDA) signals.

How accurate is the SHT20?

Sensirion specifies typical accuracy of ±3.0% RH for relative humidity and ±0.3°C for temperature under its stated test conditions. Actual results can vary with environmental conditions and sensor handling.

What is the temperature measurement range?

The SHT20 sensor IC has a specified temperature measurement range of −40°C to +125°C. This is the sensor specification; the complete module’s practical operating limits may also depend on its PCB and components.

What is the humidity measurement range?

The sensor specification lists 0–100% relative humidity. Its normal operating range is 0–80% RH; prolonged exposure above 80% RH can cause a reversible measurement offset.

Can I use this module with Arduino?

It is intended for microcontroller projects using I²C, including Arduino-based projects. Before wiring, verify the breakout board’s pinout, supply-voltage requirement and logic-level compatibility.

Can I use it with an ESP32?

The SHT20’s I²C interface can be used with an ESP32 when the breakout board’s supply and signal levels are compatible. Check the actual board circuit and pin labels before connecting it.

Can I power the module with 5V?

The SHT20 sensor IC itself requires 2.1–3.6V. The PcGuy listing does not confirm whether this breakout board includes a regulator or level shifting, so do not apply 5V unless the board documentation or markings explicitly permit it.

What is included in the package?

The listed package includes one SHT20 Temperature and Humidity Sensor Module. Additional jumper wires, cables or controllers are not listed as included.

What projects can use this sensor?

It can be used in suitable I²C-based projects such as indoor climate monitoring, weather-station prototypes, greenhouse monitoring, home automation, IoT experiments and STEM learning.

Build Environmental Monitoring Projects with SHT20

This SHT20 Temperature and Humidity Sensor Module provides digital temperature and relative-humidity measurements over I²C. It is a useful sensing component for microcontroller, automation and educational projects. Confirm the breakout board’s power and pinout details before wiring it to your controller.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “SHT20 Temperature and Humidity Sensor Module”

Your email address will not be published. Required fields are marked *