AB11 12V DC Peristaltic Dosing Pump White
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The AB11 12V DC Peristaltic Dosing Pump (White) is a compact liquid transfer pump for dosing, dispensing and automation projects. Rollers compress flexible tubing to move liquid through the tube, making it useful for compatible hydroponic, aquarium, Arduino, ESP32 and DIY fluid-handling setups.
- Model: AB11
- Product Type: Peristaltic Dosing Pump
- Operating Voltage: 12V DC
- Colour: White
- Pumping Method: Roller-compressed flexible tubing
- Fluid Path: Inside the pump tubing
- Control: External relay, MOSFET or suitable motor driver
- Applications: Dosing, dispensing, liquid transfer and automation
- Flow Rate: Not specified; calibrate the individual pump
₨4,840.00
5 in stock
5 in stock
Description
AB11 12V DC Peristaltic Dosing Pump – White is a compact pump for transferring and dispensing compatible liquids in dosing, automation and DIY fluid-handling projects. Its rollers compress flexible tubing to move liquid through the tube, keeping the fluid path separate from the motor and pump drive components.
Key Features
Designed for a 12V DC supply, making it suitable for low-voltage dosing and automation setups with an appropriately rated power source.
Rotating rollers compress the flexible tube to move liquid forward through the pump head.
The liquid travels inside the flexible tubing rather than through the motor or gearbox, helping keep the fluid path separate from the drive mechanism.
Pair the pump with a timer or controller and calibrate the delivered volume for your specific liquid and installation.
Can be switched through a suitable relay, MOSFET or motor driver in Arduino, ESP32 and other controller-based builds.
This product listing is specifically for the white-colour AB11 12V DC pump.
How the Peristaltic Pump Works
Inside the pump head, rollers press against flexible tubing in sequence. This compression pushes a portion of liquid along the tube; as the tubing recovers, it draws more liquid into the inlet side. The liquid remains within the tube during normal operation.
This design is useful for small-scale liquid transfer and dosing projects where the fluid path should remain separate from the motor and drive mechanism.
Typical Applications
- DIY hydroponic nutrient dosing
- Aquarium additive dosing projects
- Automated plant watering and liquid dispensing
- Arduino and ESP32-controlled fluid systems
- Laboratory and educational prototypes
- Small-scale liquid transfer and timed dosing
Use only liquids compatible with the supplied pump tubing. The application examples do not imply food-grade, medical-grade or chemical-resistant certification.
Arduino and ESP32 Control
The AB11 uses a 12V DC motor. A microcontroller can provide the control signal, but it must not power the pump directly from a GPIO pin. Use a suitably rated external switching device, such as a MOSFET driver or relay module, and a separate 12V supply capable of handling the pump’s operating and start-up current.
- Arduino or ESP32 controller
- Suitable MOSFET, relay or motor driver
- Regulated 12V DC power supply
- AB11 pump and compatible tubing
- Liquid reservoir and secure inlet/outlet arrangement
Choose the driver and power supply based on the actual pump current requirements. Those electrical ratings are not confirmed in the available product information.
Dosing and Flow Calibration
Do not assume a fixed flow rate or exact dose from the pump model alone. Delivered volume can vary with tubing condition, supply voltage, liquid viscosity, suction lift, discharge restriction and the individual pump.
For repeatable dosing, prime the tubing, run the pump for a measured period, collect the output in a graduated container and calculate the delivered volume per unit of time. Repeat the test under the same conditions used in your project, and recalibrate when tubing condition or setup changes.
Tubing and Liquid Compatibility
The liquid contacts the inside of the pump tubing. Confirm that the tubing material is compatible with the liquid before use. Do not assume that the pump is suitable for every chemical, solvent, concentrated acid or alkali.
This general-purpose pump should not be treated as food-grade, medical-grade or sterile equipment unless the exact pump and tubing have the required certification.
Product Specifications
| Model | AB11 |
| Product Type | Peristaltic Dosing Pump |
| Operating Voltage | 12V DC |
| Colour | White |
| Pumping Method | Roller compression of flexible tubing |
| Fluid Path | Flexible pump tubing |
| Drive | DC electric motor |
| Control | External DC power switching / suitable driver |
| Flow Rate | Not specified for this listing; calibrate the individual pump |
| Current Rating | Not confirmed for this listing |
| Applications | Liquid dosing, dispensing, transfer and automation |
Installation and Use Checklist
- Use a correctly regulated 12V DC supply.
- Confirm the supply and switching device can handle the pump’s current demand.
- Do not connect the pump motor directly to a microcontroller GPIO pin.
- Check tubing condition and chemical compatibility before use.
- Secure the inlet and outlet tubing and check for leaks.
- Prime the tubing before measuring or calibrating a dose.
- Measure the actual output if dosing accuracy matters.
- Disconnect power before servicing or changing wiring.
Why Buy from PcGuy Computers?
✓ Help with Product Selection
✓ Clear Product Information
✓ Electronics & Robotics Components
✓ After-Sales Order Assistance
Frequently Asked Questions
What voltage does the AB11 pump require?
This AB11 listing is for a 12V DC pump. Use a suitable regulated supply.
What colour is this version?
This listing is for the white AB11 peristaltic dosing pump.
How does a peristaltic pump move liquid?
Rotating rollers compress flexible tubing in sequence, pushing liquid through the tube while the fluid remains inside the tubing.
Can I control it with Arduino or ESP32?
Yes. Use a suitably rated external MOSFET, relay or motor driver and a separate 12V supply. Do not power the pump directly from a controller GPIO pin.
Can it be used for hydroponic dosing?
It can be integrated into DIY hydroponic dosing systems if the tubing is compatible with the nutrient solution. Calibrate the delivered volume for your setup.
Can it be used for aquarium dosing?
It can be used in a DIY aquarium dosing system when the tubing is compatible with the additive and the pump has been calibrated for the required dose.
What is the pump’s flow rate?
A verified flow rate is not specified for this product listing. Measure the output of your individual pump under the intended operating conditions before setting dosing times.
Does the liquid pass through the motor?
No. In normal peristaltic operation, the liquid travels through the flexible pump tubing rather than through the motor or gearbox.
Can I pump any chemical with this unit?
No. Check the tubing’s chemical compatibility first. Do not use aggressive chemicals or solvents unless the tubing material is confirmed suitable.
Is this pump food-grade or medical-grade?
Do not assume food-grade, medical-grade or sterile suitability unless the exact pump and tubing have the relevant certification.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.