Nano I/O Expansion Sensor Shield V3.0 Red
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Buy Nano I/O Expansion Sensor Shield V3.0 Red in Pakistan from PcGuy Computers for Arduino Nano sensor, servo, robotics and prototyping projects. This red expansion board breaks out the Nano’s existing I/O into convenient headers with grouped signal, power and ground connections.
- Compatibility: Arduino Nano V2.x and V3.x format boards
- Digital I/O: 14 servo-style connections
- Analogue: 8 connections
- PWM: 6 pins
- Expansion: 5-pin I2C, servo power input, AREF and 3.3V output
- PCB colour: Red
- Controller: Arduino Nano not included
A practical breakout shield for organising compatible sensors, servos and electronic modules.
₨1,320.00
9 in stock
9 in stock
Description
The Nano I/O Expansion Sensor Shield V3.0 Red is a compact breakout board that makes it easier to connect sensors, servos and compatible modules to an Arduino Nano. It routes the Nano’s existing digital and analogue connections to accessible headers, including grouped signal, power and ground connections for compatible three-wire devices.
The red PCB version is designed for Nano V2.x and V3.x style boards. It is an expansion interface, not a separate microcontroller; a compatible Arduino Nano is required and is not included unless the package explicitly says otherwise.
Key Features
Arduino Nano Compatibility
Designed for compatible Arduino Nano V2.x and V3.x format development boards.
14 Digital I/O Connections
Breaks out the Nano’s digital connections into accessible servo-style headers with signal, power and ground.
8 Analogue Connections
Provides convenient access to the Nano’s analogue input connections for compatible variable-output sensors.
6 PWM Connections
Offers access to the Nano’s PWM-capable pins for compatible control and output projects.
I2C Expansion
Includes a 5-pin I2C expansion connection for compatible displays, sensors and peripheral modules.
Servo and Power Interfaces
Includes a servo power input, AREF output and 3.3V output for supported project connections.
Organised Sensor Connections
Many Arduino-compatible modules use three connections: Signal for data or control, Power for the module supply and Ground for the common reference. The shield groups these connections into convenient headers, helping reduce loose jumper wiring when several devices are used together.
Check each module’s pin order, supply voltage and logic-level requirements before connecting it. A matching three-pin plug does not guarantee that every sensor uses the same wiring order.
Digital, Analogue and PWM Access
The digital breakout connections can be used with compatible switches, LEDs, digital sensors and control modules. Analogue connections are useful for potentiometers and sensors that provide a variable voltage within the Nano’s permitted input range.
PWM-capable pins can be used for supported output-control tasks such as LED brightness or compatible servo signal generation through the appropriate Arduino code and libraries. The shield exposes the Nano’s existing pins; it does not add extra programmable GPIO.
I2C Module Expansion
The I2C expansion connection provides convenient access to the Nano’s I2C bus for compatible peripherals such as OLED displays, real-time clocks and digital sensor modules. Multiple devices may share the bus when their addresses and electrical requirements are compatible.
Servo Connections and External Power
The grouped signal, power and ground headers are convenient for standard three-wire hobby servos. The Nano supplies the control signal while the shield provides an organised connection point.
Servos can draw considerably more current than sensors, especially during startup or under load. Use a suitably rated external supply when required, follow the shield’s power-input markings and ensure the controller and servo supply share a common ground where the circuit requires it. Do not assume the Nano’s USB connection or onboard regulator can power multiple servos.
Typical Project Applications
- Arduino Nano sensor experiments
- Robotics and robot-car projects
- Servo and pan-and-tilt control
- Digital and analogue sensor integration
- I2C display and peripheral connections
- Automation and monitoring prototypes
- STEM learning and DIY electronics
Technical Specifications
| Product name | Nano I/O Expansion Sensor Shield V3.0 Red |
|---|---|
| Product type | Arduino Nano I/O and sensor expansion shield |
| Version | V3.0 |
| PCB colour | Red |
| Compatibility | Arduino Nano V2.x and V3.x format boards |
| Digital I/O headers | 14 servo-style I/O connections |
| Analogue connections | 8 analogue connections |
| PWM connections | 6 PWM-capable pins |
| I2C expansion | 5-pin I2C connection |
| Sensor header format | Signal, power and ground (G-V-S style) |
| Servo power input | Available |
| Additional outputs | AREF and 3.3V output |
| Board dimensions | Approximately 55 × 52 × 12 mm |
| Approximate weight | 20 g |
| Main function | Breakout of existing Nano I/O and power connections |
| Controller included | No – Arduino Nano required separately |
| Applications | Sensors, servos, robotics, automation and prototyping |
Important Setup and Power Notes
- Check Nano header alignment and orientation before inserting the controller.
- Verify the pin order and operating voltage of each sensor or module before connecting it.
- Use the servo power input according to the board markings and the connected device’s voltage/current requirements.
- Do not connect motors, pumps or solenoids directly to Nano GPIO pins; use suitable driver circuitry and a correctly rated supply.
- Traditional ATmega328P Nano V3 boards use 5V logic. Check whether 3.3V-only peripherals require level shifting.
- Exact power routing and connector details can vary between generic board revisions. Treat the markings on the supplied PCB as the final reference.
Frequently Asked Questions
What does the Nano I/O Expansion Sensor Shield V3.0 Red do?
It breaks out the Arduino Nano’s existing digital and analogue connections into more accessible headers for sensors, servos and compatible modules.
Does it include an Arduino Nano?
No. This listing is for the expansion shield. A compatible Nano controller is required separately unless the package explicitly states otherwise.
Which Nano versions are compatible?
It is designed for Nano V2.x and V3.x style boards. Check the physical pin layout and electrical characteristics of your exact Nano before use.
How many digital connections does it provide?
The commonly specified V3.0 layout provides 14 digital I/O connections in servo-style signal, power and ground headers.
Can I connect analogue sensors?
Yes. The shield exposes 8 analogue connections for compatible analogue sensors and variable-voltage devices.
Does it support PWM?
Yes. The common V3.0 specification provides access to 6 PWM-capable Nano pins.
Can I connect an I2C display or sensor?
Yes. The shield provides a 5-pin I2C expansion connection for compatible displays, sensors and peripherals. Check voltage and pin assignments first.
Can I connect hobby servos?
Yes. The grouped three-wire headers are convenient for compatible servos. Use an appropriately rated external supply when the servo current exceeds what the Nano can safely provide.
Why is there a servo power input?
It provides a separate power connection for servo-related loads where required. Follow the board’s printed power instructions and the servo’s voltage and current requirements.
Does the shield add more programmable pins?
No. It makes the Nano’s existing I/O easier to access but does not add a second microcontroller or extra programmable GPIO.
Can I connect a motor directly to the shield?
No. The expansion headers are not motor drivers. Use a suitable MOSFET, transistor or motor-driver module and an appropriately rated power source.
Does the red PCB have different functionality from other colours?
Red describes the PCB colour. Confirm electrical features and connector arrangements from the exact board revision rather than assuming colour indicates a different circuit design.
Why Buy from PcGuy Computers?
| Arduino project range | Browse related Nano boards, sensors, servos and expansion accessories. |
|---|---|
| Project selection | Find components for robotics, automation, STEM learning and electronics prototyping. |
| Practical product details | Review compatibility and connection guidance before choosing project hardware. |
The Nano I/O Expansion Sensor Shield V3.0 Red provides an organised connection platform for compatible Arduino Nano boards, with digital and analogue breakouts, sensor-style headers, I2C access and servo power input for robotics, automation and prototyping projects.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.