MB-102 830 Tie Points Breadboard
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
MB-102 830 Tie Points Breadboard is a full-size solderless prototyping board for Arduino, microcontroller, sensor and electronics projects. It provides 830 connection points, standard 2.54mm spacing, a 630-point main terminal area and 200 points across the power rails for larger circuit layouts.
- Model: MB-102
- Product Type: Solderless breadboard
- Tie Points: 830
- Main Terminal Area: 630 tie points
- Power Distribution Area: 200 tie points
- Pitch: 2.54mm / 0.1 inch
- Format: Full-size breadboard
- Connection: Internal spring contacts
- Centre Channel: Yes, for compatible DIP ICs
- Reusable: Yes
- Package: 1 x MB-102 830 tie points breadboard
₨1,540.00
40 in stock
40 in stock
Description
The MB-102 830 Tie Points Breadboard is a full-size solderless prototyping board for building, testing and modifying low-voltage electronic circuits without soldering. It provides 830 tie points, typically arranged as a 630-point main terminal area and 200 points across the power distribution rails, with standard 2.54mm spacing and a centre channel for compatible DIP ICs. It is suitable for Arduino, microcontroller, sensor, STEM and general electronics projects.
Key Features
830 Tie Points
Provides a larger working area for multi-component circuits, experiments and electronics prototypes.
630-Point Terminal Area
The central area accommodates compatible through-hole components, DIP ICs and jumper connections.
200-Point Power Rails
Side connection strips provide convenient points for distributing supply and ground connections around a prototype.
Standard 2.54mm Pitch
Works with many common through-hole components, pin headers and breadboard-compatible jumper wires.
Solderless Spring Contacts
Build and change temporary circuit connections without permanently soldering components.
Full-Size Reusable Format
Offers more prototyping space than a compact 400-point breadboard and can be reused across projects.
830 Tie Points for Larger Prototypes
The MB-102 provides 830 tie points, commonly divided into 630 points in the main terminal area and 200 points across the side power distribution rails. This full-size layout gives you room to arrange multiple components, integrated circuits, sensors, LEDs, resistors and jumper wires within one prototype.
Solderless Circuit Building
Internal spring contacts connect groups of holes underneath the breadboard. Insert compatible component leads and jumper wires into these contacts to create temporary electrical connections. You can then move components, change resistor values, troubleshoot wiring or rebuild the circuit without soldering.
Standard 2.54mm Pitch and DIP Centre Channel
The 2.54mm (0.1-inch) spacing is common in hobby electronics and suits many through-hole components, including resistors, LEDs, capacitors, transistors, diodes, push buttons, pin headers and compatible DIP integrated circuits. The centre channel separates the two main terminal sections so a compatible DIP IC can straddle the gap with its pin rows on opposite sides.
Power Distribution Rails
The MB-102 includes side power rails intended to make it easier to distribute supply and ground connections around a prototype. The printed rail markings are guides only; the actual polarity depends on how you connect the power supply.
Power-rail continuity can vary between MB-102 manufacturers and revisions. Some versions may have a break in the centre. If you need a continuous rail, check it with a multimeter or continuity tester rather than assuming every section is internally connected.
For Arduino, ESP32 and Raspberry Pi Projects
Use suitable male-ended Dupont jumper wires to connect compatible development boards and modules to components on the breadboard. The full-size layout is useful for larger circuit arrangements and projects with several components or circuit sections.
- Arduino UNO and Mega circuit experiments
- Compatible ESP32 and ESP8266 development boards
- Raspberry Pi GPIO learning circuits
- LEDs, switches, resistors and potentiometers
- Temperature, humidity and light sensor interfaces
- 555 timer, logic IC and operational amplifier experiments
- Transistor switching and communication circuits
Check the physical width and header arrangement of your development board before placing it on the breadboard. ESP32, ESP8266 and Raspberry Pi GPIO generally use 3.3V logic. The breadboard does not provide voltage regulation or logic-level conversion.
Organise Circuits with Jumper Wires
Male-ended Dupont jumper wires can connect development boards, modules and components to the MB-102. Preformed breadboard wires can help keep connections shorter and more organised. Using different wire colours for power, ground and signal connections can also make a prototype easier to inspect and troubleshoot.
Passive Platform for Low-Voltage Prototyping
The MB-102 is a passive electrical connection platform. It does not generate or regulate power and does not provide voltage regulation, current limiting, logic-level conversion, reverse-polarity protection, short-circuit protection or over-current protection. Any required protection must be provided by the circuit and its power system.
Use the breadboard for low-voltage, relatively low-current experiments. Do not treat it as high-current power wiring or use it for exposed mains-voltage circuits. Motors, pumps, solenoids, large servos, heaters and other substantial loads need suitable drivers, external power supplies and appropriately rated wiring.
MB-102 830 Tie Points vs 400 Tie Points Breadboard
The MB-102 830-point breadboard offers substantially more working space than a compact 400-point board. A 400-point breadboard is convenient for smaller circuits and compact prototypes, while the MB-102 is better suited to projects involving more components, multiple ICs or several circuit sections. Choose the size according to the layout and complexity of your project.
Product Specifications
| Model | MB-102 |
|---|---|
| Product Type | Solderless breadboard |
| Total Tie Points | 830 |
| Main Terminal Area | 630 tie points |
| Power Distribution Area | 200 tie points |
| Pitch | 2.54mm / 0.1 inch |
| Format | Full-size breadboard |
| Connection Type | Internal spring contacts |
| Centre Channel | Yes, for compatible DIP ICs |
| Power Rails | Side distribution rails; continuity may vary by version |
| Soldering Required | No |
| Reusable | Yes |
| Typical Components | Jumper wires, DIP ICs and through-hole components |
| Applications | Arduino, microcontrollers, circuit testing, STEM and electronics prototyping |
What’s Included?
- 1 x MB-102 830 Tie Points Breadboard
Development boards, jumper wires, power supplies and electronic components are not included unless a specific bundle listing states otherwise.
Frequently Asked Questions
How many tie points does the MB-102 have?
It provides 830 tie points, commonly arranged as 630 points in the main terminal area and 200 points across the power distribution rails.
Does the MB-102 require soldering?
No. Its internal spring contacts hold compatible component leads and jumper wires to create temporary connections without soldering.
Can I reuse the breadboard?
Yes. Components and jumper wires can be removed after testing and the board reused for other prototype circuits.
Can I use it with Arduino UNO or Mega?
Yes. Suitable male-to-male Dupont jumper wires can connect Arduino power, ground and GPIO pins to components on the breadboard.
Can I use Dupont jumper wires?
Yes. Male-ended Dupont jumper wires are commonly used to connect the MB-102 to development boards, modules and other prototyping components.
Can I install DIP integrated circuits?
Yes. Compatible DIP ICs can be positioned across the centre channel so their two pin rows connect to separate terminal groups. Check the package width and pin spacing for fit.
Is the MB-102 a full-size breadboard?
Yes. The common 830 tie point MB-102 format is generally regarded as a full-size solderless breadboard.
Are the power rails continuous from end to end?
This varies between manufacturers and revisions. Some versions have split power rails, so check continuity with a multimeter when full-length connectivity is required.
Can I use it with ESP32 or ESP8266?
Yes, if the particular development board fits the breadboard layout and has compatible headers. These controllers generally use 3.3V GPIO logic; the breadboard does not provide level shifting.
Can I use it with Raspberry Pi?
Yes. Suitable jumper wires can connect Raspberry Pi GPIO to breadboard circuits. Raspberry Pi GPIO uses 3.3V logic and must be protected from incompatible higher-voltage signals.
Can I run a motor or pump through the breadboard?
The board is intended primarily for low-current prototyping. Motors and other substantial loads should use suitable driver circuitry, external power wiring and appropriately rated connectors.
Can I use the MB-102 for 240V mains circuits?
No. Hobby solderless breadboards are intended for low-voltage prototyping and do not provide the insulation, spacing or enclosure required for mains electrical work.
Are jumper wires and components included?
The listed package includes one MB-102 830 tie points breadboard. Development boards, jumper wires, power supplies and other components are separate unless a bundle listing states otherwise.
Why Buy from PcGuy Computers?
| Pakistan-Focused Support | Product information and practical guidance for customers in Pakistan. |
|---|---|
| Pakistan-Wide Shipping Options | Shipping options can be selected according to destination and service availability. |
| Related Project Components | Explore Arduino boards, jumper wires, sensors, modules and prototyping accessories for related builds. |
| Practical Product Guidance | Clear specifications and compatibility notes help you plan your electronics project. |
Buy the MB-102 830 Tie Points Breadboard in Pakistan for full-size solderless circuit building, Arduino development, electronics education, testing and rapid prototyping.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.