Keyestudio Water Vapour Sensor Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Keyestudio Water Vapour Sensor Module is an analog steam and surface-moisture sensor for Arduino and compatible microcontroller projects. It detects moisture changes on its sensing face and provides an analog signal for simple rain, water-drop and steam detection experiments.
- Brand: Keyestudio
- Reference Model: KS0203 (verify board marking)
- Sensor Type: Vapor / Steam Sensor
- Operating Voltage: 3.3V or 5V
- Operating Current: Less than 20mA
- Output: Analog signal
- Pins: S (Signal), + (VCC), – (GND)
- Temperature Range: -10°C to +70°C
- Applications: Steam, rain and water-drop detection prototypes
- Note: Connector is not waterproof; not a calibrated room-humidity sensor
₨1,320.00
10 in stock
10 in stock
Description
The Keyestudio Water Vapour Sensor Module is an analog steam and moisture detection module designed for Arduino and compatible electronics projects. It senses changes in moisture on its detection surface and produces an analog output voltage that can be read by a microcontroller. It can be used for simple rain detection, water-drop sensing, steam experiments and liquid-level indication prototypes. This is a surface moisture/steam sensor, not a calibrated room-humidity sensor.
Key Features
Analog Output
Provides a changing analog signal as moisture on the sensing face increases.
Steam and Moisture Detection
Detects moisture changes on the sensor surface and can be used in simple steam or water-drop experiments.
3.3V or 5V Operation
Keyestudio specifies a 3.3V or 5V operating supply for the KS0203 vapor sensor.
Microcontroller Friendly
Analog signal output can be read by a compatible microcontroller analog input.
Simple Three-Pin Interface
Signal, power and ground pins make basic wiring straightforward.
STEM Prototyping
Useful for learning analog sensing and building simple rain, moisture and automation demonstrations.
Technical Specifications
| Brand | Keyestudio |
|---|---|
| Product Type | Vapor / Steam Sensor Module |
| Reference Model | KS0203 (confirm the printed model on the supplied board) |
| Operating Voltage | 3.3V or 5V |
| Operating Current | Less than 20mA |
| Output Type | Analog signal output |
| Pin Configuration | S: Signal; +: VCC; -: GND |
| Operating Temperature | -10°C to +70°C |
| Detection | Surface moisture, steam and water droplets |
| Controller Compatibility | Arduino and compatible boards with suitable analog input and voltage levels |
Applications and Project Ideas
- Steam detection demonstrations: Observe changes in analog readings when moisture or steam reaches the sensing face.
- Rain detection prototypes: Use the analog output to experiment with simple rain or water-drop alerts.
- Liquid-level experiments: Build basic detection prototypes where moisture contacts the sensing surface.
- Arduino projects: Read the sensor value through an analog input and display it in the Serial Monitor.
- STEM learning: Explore analog signals, sensor thresholds and microcontroller programming.
Wiring and Setup
- Connect the module’s + pin to a suitable 3.3V or 5V supply supported by your board.
- Connect the – pin to GND.
- Connect the S pin to a compatible analog input, such as Arduino A0.
- Read the analog value and compare readings under dry and moist conditions to establish a threshold for your project.
- Use the correct logic and input voltage limits for your microcontroller. Do not apply a 5V analog signal to a 3.3V-only input.
Important Handling Notes
The connector and electronic connection area are not waterproof. Do not immerse the module or its connector in water. The sensor is intended to detect moisture at its sensing face; it is not a calibrated relative-humidity instrument and should not be used as a safety-critical water detector. Readings can vary with the environment, surface condition, supply voltage and individual module.
Frequently Asked Questions
What does the Keyestudio Water Vapour Sensor detect?
It detects moisture changes on its sensing surface, including steam or water droplets, and provides an analog output that changes with the detected moisture.
Is this a room humidity sensor?
No. It is a surface-based vapor or steam sensor. It is not a calibrated relative-humidity sensor for measuring room humidity as a percentage.
What is its operating voltage?
Keyestudio specifies 3.3V or 5V operation for the KS0203 vapor sensor. Ensure the supply and signal levels are suitable for your controller.
Can I connect it to Arduino?
Yes. Connect signal to an analog input, power to a supported supply pin and ground to GND. You can read the analog value using analogRead().
Does it provide digital output?
The documented KS0203 module provides analog signal output. You can create a digital threshold in your code by comparing the analog reading with a value you choose after testing.
Can the module be submerged in water?
No. Keyestudio warns that the connection parts are not waterproof. Do not immerse the board or connector in water.
Can it be used for rain detection?
It can be used in simple rain or water-drop detection prototypes by monitoring changes in its analog output. Protect the electronics and connections from water exposure.
Which microcontrollers are compatible?
It can be used with Arduino and other controllers that provide a compatible analog input. Check the controller’s voltage limits and wiring requirements before connecting it.
Why Buy from PcGuy Computers?
PcGuy Computers provides product information and assistance to help customers select suitable electronics and STEM development modules. Confirm current availability, package contents and applicable warranty terms with the store before ordering.
Keyestudio Water Vapour Sensor Module – Summary
The Keyestudio Water Vapour Sensor Module is an analog surface moisture and steam sensor for compatible Arduino and microcontroller projects. With 3.3V or 5V operation and a simple signal output, it is useful for rain-detection experiments, moisture alerts and STEM prototyping. Keep its connector and electronic areas dry.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.