Keyestudio RJ11 IR Transmitter Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

Ā 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the Keyestudio RJ11 IR Transmitter Module in Pakistan for short-range infrared remote-control and communication projects. Designed for compatible Keyestudio EASY Plug control boards.

  • Brand: Keyestudio
  • Model: KS0126
  • Module Type: Infrared Transmitter
  • Power Supply: 3V–5V DC
  • IR Wavelength: 940nm
  • Modulation Frequency: 38kHz
  • Emission Angle: Approx. 20°
  • Specified Range: Approx. 1.3m at 5V/38kHz
  • Connector: RJ11 6P6C EASY Plug
  • Dimensions / Weight: 44 Ɨ 20 Ɨ 18mm / approx. 4.5g

₨1,760.00

15 in stock

15 in stock

Description

The Keyestudio RJ11 IR Transmitter Module sends infrared light signals for short-range remote-control and wireless communication experiments. Designed for compatible Keyestudio EASY Plug control boards, it can transmit coded IR commands to a matching infrared receiver or suitable IR-controlled device, making it useful for Arduino learning, robotics and DIY automation projects.

Key Features

Infrared Signal Transmission

Uses an infrared LED to send invisible light signals for remote-control experiments.

38kHz Modulation

Designed for common 38kHz IR remote-control communication when driven with a suitable signal.

3V–5V Supply

Operates from a low-voltage DC supply within the manufacturer’s specified range.

RJ11 EASY Plug

Connects to compatible Keyestudio EASY Plug control boards using an RJ11 6P6C cable.

Compact Mountable Board

Includes a mounting hole for fitting the transmitter into a prototype or project enclosure.

Short-Range IR Link

Manufacturer specifies approximately 1.3m transmission distance under stated 5V, 38kHz conditions.

Technical Specifications

Brand Keyestudio
Module Type EASY Plug Infrared Transmitter
Documentation Model KS0126
Power Supply 3V–5V DC
Infrared Wavelength 940nm
Modulation Frequency 38kHz
Emission Angle Approximately 20°
Specified Transmission Distance Approximately 1.3m (at 5V, 38kHz)
Connector RJ11 6P6C EASY Plug
Dimensions 44 Ɨ 20 Ɨ 18mm
Weight Approximately 4.5g

Compatible Devices and Controllers

  • Keyestudio EASY Plug control boards with an RJ11 6P6C interface.
  • Arduino-based projects using a compatible EASY Plug control board and suitable IR transmitter code/library.
  • IR receiver modules and devices that support the transmitted protocol and modulation.
  • Other microcontrollers only when the connector pinout, voltage and signal wiring are correctly confirmed and adapted.

Applications

  • DIY infrared remote-control experiments.
  • Sending commands to compatible IR-controlled appliances.
  • Arduino and STEM electronics lessons.
  • Robotics and interactive electronics prototypes.
  • Short-range infrared communication demonstrations.

Connection and Setup Guide

  1. Connect the transmitter to a compatible Keyestudio EASY Plug control board using the correct RJ11 6P6C cable.
  2. Connect and power the control board according to its documentation.
  3. Install and include a compatible IR remote library in your Arduino sketch.
  4. Configure the transmitter output according to the board’s pin mapping and the library instructions. Keyestudio’s example for a standard UNO setup uses digital pin 3.
  5. Send an IR command and point the transmitter toward a compatible IR receiver or target device. Test at a short distance first.

Important Before Buying

  • RJ11 pinout: The connector is not universally wired. Keyestudio states that this module is compatible with its EASY Plug control board; other brands may use a different internal wire sequence.
  • Line of sight: Infrared is light-based and generally needs a clear path to the receiver. It does not work like Wi-Fi or Bluetooth and cannot reliably pass through walls.
  • Range: The approximately 1.3m figure is a manufacturer-stated value under 5V/38kHz conditions. Actual range depends on alignment, ambient light, receiver sensitivity and target.
  • Receiver and controller: This is a transmitter module, not a complete remote-control system. A compatible controller, code and receiving device are required and are not confirmed as included.

Frequently Asked Questions

What does the Keyestudio RJ11 IR Transmitter Module do?

It converts an electrical control signal into infrared light pulses for short-range remote-control and IR communication projects.

Can it control a TV or other IR appliance?

It can be used in a project that sends the correct IR protocol and command codes for a compatible device. The module alone does not automatically know appliance commands.

What is the operating voltage?

The manufacturer’s KS0126 documentation specifies a 3V to 5V DC power supply.

What is its IR transmission range?

Keyestudio specifies approximately 1.3 metres at 5V and 38kHz. Real-world range can vary with alignment, ambient light and receiver sensitivity.

Does it work with an Arduino Uno?

Yes, as part of a compatible Keyestudio EASY Plug setup. The manufacturer’s example for a standard UNO uses digital pin 3 with an appropriate IR library.

Can I plug it into any RJ11 connector?

No. RJ11 only describes the connector. Confirm the internal pin sequence before connecting it to a board from another brand.

Does the module include an IR receiver?

No receiver is specified as part of this transmitter module. A compatible IR receiver or target device is needed to receive the transmitted commands.

Can infrared signals pass through walls?

No. IR remote-control signals generally require a clear path to the receiver, although reflections from nearby surfaces may sometimes help.

Why Buy from PcGuy Computers?

  • Shop electronics and STEM components from one place.
  • Product information focused on practical setup and compatibility.
  • Local order assistance for customers in Pakistan.
  • Support with product selection before you place an order.

Buy Keyestudio RJ11 IR Transmitter Module in Pakistan

Order the Keyestudio RJ11 IR Transmitter Module from PcGuy Computers for Arduino learning, infrared remote-control experiments and compatible EASY Plug projects. Check your controller’s RJ11 pinout and ensure your project has a compatible IR receiver or target device.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio RJ11 IR Transmitter Module”

Your email address will not be published. Required fields are marked *