Keyestudio KS0304 W5500 Ethernet Development Board
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Keyestudio KS0304 W5500 Ethernet Development Board combines an ATmega328 microcontroller, W5500 wired Ethernet controller, RJ45 port, MicroSD/TF slot and Micro USB interface. Its UNO-compatible layout supports embedded web servers, network monitoring, wired IoT, automation and data logging.
- Brand: Keyestudio
- Model: KS0304
- Microcontroller: ATmega328, 16MHz
- Ethernet Controller: W5500
- Network: RJ45 wired Ethernet
- Digital I/O: 14 pins, including 6 PWM
- Analogue Inputs: 6
- Storage: MicroSD / TF card slot
- USB: Micro USB, 5V
- External Power: 7–12V DC, 9V recommended
- PoE: Not supported
₨11,000.00
28 in stock
28 in stock
Description
The Keyestudio KS0304 W5500 Ethernet Development Board combines an ATmega328 microcontroller with an onboard W5500 Ethernet controller, RJ45 port, MicroSD/TF card slot and Micro USB interface. Its UNO-compatible pin layout provides 14 digital I/O pins, including 6 PWM outputs, and 6 analogue inputs for embedded networking and electronics projects.
Use it to develop wired IoT devices, local web servers, network sensor monitors, automation controllers and data-logging prototypes. It is a complete ATmega328 development board with Ethernet built in, rather than a standalone Ethernet shield.
Key Features
ATmega328 Controller
16MHz microcontroller platform with familiar Arduino-compatible development workflow.
W5500 Ethernet
Hardware TCP/IP Ethernet controller for wired network communication.
RJ45 Network Port
Connect to a compatible router, Ethernet switch or local network using a network cable.
MicroSD / TF Slot
Add compatible removable storage for measurements, event logs and project files.
UNO-Compatible I/O
14 digital I/O pins, 6 PWM-capable pins and 6 analogue inputs.
Micro USB Interface
Connect the board to a computer for programming, serial communication and USB power.
Standalone Power Options
Use 5V USB power or the specified 7–12V DC external input, with 9V recommended.
Integrated W5500 Ethernet Networking
The onboard W5500 controller provides hardware TCP/IP networking for embedded applications. The ATmega328 can communicate over a wired Ethernet connection without needing a separate Ethernet shield. With compatible libraries and project code, you can build:
- Embedded web servers and local network dashboards
- Network sensor monitoring systems
- Remote digital I/O controllers
- Home and workshop automation prototypes
- Equipment and environmental monitoring projects
- Wired IoT and data-logging applications
ATmega328 Microcontroller & UNO-Compatible Layout
The board uses an ATmega328 running at 16MHz and provides a familiar UNO-compatible pin arrangement for compatible sensors, displays, switches and other project hardware.
- 14 digital input/output pins
- 6 PWM-capable digital pins
- 6 analogue input pins
- 32KB Flash memory
- 2KB SRAM
- 1KB EEPROM
Physical pin-layout compatibility does not guarantee that every UNO shield will work without conflicts. The onboard W5500 and MicroSD interface use microcontroller resources, so check pin assignments and SPI chip-select requirements before adding expansion hardware.
MicroSD Storage for Data Logging
The integrated MicroSD/TF card slot can provide removable storage for sensor readings, event records, configuration files and other project data. A compatible memory card is required separately unless the package contents specifically state otherwise.
Ethernet and MicroSD can support projects that record measurements locally while also making current readings available over a wired network. Follow the relevant Keyestudio example instructions for card use and interface configuration.
Micro USB & Power Options
The Micro USB interface provides a computer connection for programming and serial communication, as well as the specified 5V USB power input. A suitable Micro USB data cable is needed for computer programming.
For standalone projects, the specified external input is 7–12V DC, with 9V recommended. Ensure the supply is correctly connected and suitable for the complete setup, including attached modules.
Ethernet, Not Wi-Fi or PoE
The W5500 provides wired RJ45 Ethernet networking. The board does not provide onboard Wi-Fi or Bluetooth, and this KS0304 version does not support Power over Ethernet (PoE). Network communication uses the Ethernet cable; power must be supplied through the appropriate USB or external power input.
Network & Expansion Considerations
- SPI resource sharing: W5500 and MicroSD interfaces use SPI-related resources. Check chip-select assignments and peripheral pin use when expanding the project.
- MAC address: Configure an appropriate unique MAC address for each board on the same network to avoid address conflicts.
- Throughput: A 10/100-class Ethernet interface does not mean the ATmega328 application can process data continuously at 100Mbps. Actual throughput depends on the controller, software, SPI communication and protocol overhead.
- External loads: Motors, pumps, solenoids and high-power lighting require suitable external drivers, relays and power supplies. Do not power them directly from microcontroller I/O pins.
KS0304 Development Board vs. Ethernet Shield
The KS0304 is a complete ATmega328 development board with an integrated W5500 Ethernet controller. A standalone Ethernet shield is an expansion board that normally requires a separate compatible controller board.
Keyestudio’s KS0443 is a W5500 Ethernet shield for a separate compatible controller, while the KS0304 combines the controller and Ethernet hardware on one board.
Product Specifications
| Brand | Keyestudio |
|---|---|
| Model | KS0304 |
| Product Type | Ethernet development board |
| Main Microcontroller | ATmega328 |
| Ethernet Controller | W5500 |
| Network Interface | RJ45 wired Ethernet |
| Digital I/O Pins | 14 |
| PWM Outputs | 6 |
| Analogue Inputs | 6 |
| Flash Memory | 32KB |
| SRAM | 2KB |
| EEPROM | 1KB |
| Clock Frequency | 16MHz |
| USB Power | 5V |
| External Power Input | 7–12V DC |
| Recommended External Power | 9V DC |
| USB Interface | Micro USB |
| Storage | MicroSD / TF card slot |
| Pin Layout | UNO-compatible |
| Wi-Fi / Bluetooth | Not provided onboard |
| PoE | Not supported |
Example Project Applications
- Arduino Ethernet and embedded web-server projects
- Wired IoT and local network dashboards
- Temperature or humidity monitoring with compatible sensors
- MicroSD data logging and event recording
- Home, greenhouse and workshop automation prototypes
- Network-controlled relay systems using suitable external driver hardware
- Educational embedded networking experiments
Why Buy from PcGuy Computers?
| Pakistan-Focused Support | Product information and practical guidance for customers in Pakistan. |
|---|---|
| Development Hardware Range | Explore Arduino-compatible boards, Keyestudio modules and microcontroller accessories. |
| Networking Components | Find related Ethernet, communication, sensor and automation components for compatible projects. |
| Shipping Options | Pakistan-wide shipping options, subject to destination and service availability. |
Frequently Asked Questions
Which microcontroller does the KS0304 use?
It uses an ATmega328 microcontroller operating at 16MHz.
Which Ethernet controller is built in?
The board integrates a W5500 hardware Ethernet controller for wired network communication.
Do I need a separate Arduino UNO?
No. The KS0304 is a complete ATmega328-based development board with Ethernet hardware integrated.
Does it have an RJ45 Ethernet port?
Yes. It has an onboard RJ45 interface for a compatible wired Ethernet connection.
Does the KS0304 support Wi-Fi or Bluetooth?
No onboard Wi-Fi or Bluetooth is specified. The W5500 provides wired Ethernet networking.
Does it support Power over Ethernet?
No. This is the non-PoE version. Power the board through its Micro USB or specified external DC input.
Is a MicroSD card included?
The board has a MicroSD/TF slot, but a memory card is not listed as included. Check the package contents if you need one supplied.
What USB connector does it use?
It uses a Micro USB interface. Use a suitable data cable for programming and computer communication.
How many I/O pins are available?
The board provides 14 digital I/O pins, including 6 PWM-capable pins, and 6 analogue inputs.
Can I build a web server with this board?
Yes. Compatible Ethernet libraries can be used to serve pages and respond to requests over a wired local network.
What external power supply does it require?
The specified external input is 7–12V DC, with 9V recommended. It can also be powered through its 5V Micro USB connection.
Can I use other SPI modules with it?
Potentially, but check SPI pin usage and chip-select assignments because the onboard W5500 and MicroSD interface share microcontroller resources with other SPI peripherals.
Is the KS0304 the same as the KS0443 Ethernet shield?
No. The KS0304 is a complete ATmega328 development board with integrated W5500 Ethernet. The KS0443 is an Ethernet shield intended for a separate compatible controller board.
Can I connect motors or pumps directly to its I/O pins?
No. Use suitable external driver or relay hardware and an appropriately rated power supply for motors, pumps and other substantial loads.
The Keyestudio KS0304 W5500 Ethernet Development Board combines ATmega328 control, wired Ethernet and MicroSD storage in one UNO-compatible platform. It is suited to embedded web servers, network monitoring, wired IoT, automation and data-logging prototypes.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.