Keyestudio KS0178 Sensor Kit for Arduino Starters- K1

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Buy the Keyestudio KS0178 Sensor Kit for Arduino Starters – K1 in Pakistan. This beginner electronics kit includes a Keyestudio REV4 Arduino-compatible controller, 830-hole breadboard, USB cable, jumper wires, LEDs, buzzers and sensor modules for hands-on programming and circuit experiments.

  • Model: KS0178 Sensor Starter Kit K1
  • Controller: Keyestudio REV4 included
  • Prototyping: 830-hole solderless breadboard
  • Sensors: DS18B20, IR receiver/transmitter, touch, knock, tilt, MQ-3 and obstacle avoidance
  • Components: LEDs, resistors, potentiometers, button and buzzers
  • Connections: USB cable, jumper wires and Dupont wires
  • Programming: Arduino-compatible
  • Suitable for: Beginners, students, STEM learning and electronics hobbyists

₨15,400.00

5 in stock

5 in stock

Description

Buy the Keyestudio KS0178 Sensor Kit for Arduino Starters – K1 in Pakistan for a practical introduction to Arduino programming, breadboard circuit building and sensor experiments. The kit includes a Keyestudio REV4 controller board, 830-hole solderless breadboard, USB cable, jumper wires, LEDs, buzzers, resistors and sensor modules, so you can start learning without buying a separate controller.

REV4 Controller Included

Arduino-compatible main control board and USB cable are supplied in the kit.

Sensor Experiments

Explore temperature, infrared, touch, knock, tilt, alcohol-vapour and obstacle detection modules.

Breadboard Learning

Build reusable circuits with the 830-hole breadboard and jumper wires.

Guided Projects

Keyestudio tutorials provide connection diagrams and sample code for the experiments.

What Is the Keyestudio KS0178 K1 Sensor Kit?

The Keyestudio KS0178 Sensor Kit for Arduino Starters – K1 is a beginner-friendly electronics learning package. It combines a programmable controller with common circuit components and sensor modules, allowing learners to explore how code interacts with physical electronics.

Start with basic tasks such as uploading a program and blinking an LED, then progress to buttons, PWM brightness control, buzzer sounds, temperature measurement, infrared communication, touch sensing and obstacle detection. Keyestudio provides learning tutorials with wiring diagrams and example programs.

Keyestudio REV4 Main Control Board Included

The kit includes one Keyestudio REV4 main control board, an Arduino-compatible controller used to run the learning projects. Connect the board to a computer using the supplied 0.5m USB cable to upload programs and communicate with the Arduino development environment.

A separate Arduino UNO is therefore not normally required for the standard KS0178 lessons. Install the appropriate board driver and select the matching board and port in your programming software before uploading a sketch.

Learn Arduino Programming Step by Step

The KS0178 learning material introduces core programming and electronics concepts through practical activities, including:

  • Digital inputs and outputs: Read button and sensor states, then control LEDs and other outputs.
  • Analogue inputs: Read changing values from components such as a potentiometer.
  • PWM output: Explore LED brightness control using pulse-width modulation.
  • Serial communication: Send messages between the controller and a computer.
  • Conditions and loops: Use program logic to respond to input changes.
  • Sensor projects: Read and respond to temperature, touch, tilt, knock and infrared modules.
  • Libraries: Learn to use the software libraries required by selected modules.

830-Hole Solderless Breadboard and Jumper Wires

The included 830-hole solderless breadboard lets you assemble and modify circuits without permanently soldering components together. Use the supplied 65-piece jumper wire set and male-to-female Dupont wires to connect components to the controller.

Breadboard prototyping is useful for learning circuit layout, power and ground connections, component placement and signal wiring. You can dismantle and reuse the components for different experiments.

Explore the Included Sensor Modules

DS18B20 Digital Temperature Sensor

Measure temperature using the DS18B20 digital sensor module. The sensor supports a documented measurement range of approximately -55°C to +125°C and communicates digitally with a compatible controller program.

Infrared Receiver and Transmitter

The IR receiver detects compatible modulated infrared signals, while the IR transmitter sends infrared output under program control. Use them to explore remote-control concepts and short-range infrared communication.

Capacitive Touch Sensor

Experiment with touch-based input using the capacitive touch sensor. A touch can trigger a programmed response such as switching an LED or buzzer, without relying on a conventional mechanical button.

Knock Sensor

The knock sensor detects a mechanical tap or vibration and provides a signal that a program can read. Try simple knock-triggered indicators, alarms or introductory electronic percussion experiments.

Tilt Sensor

The digital tilt sensor detects a change in orientation. It can be used in basic movement-triggered projects, warning indicators and tilt-sensitive experiments.

MQ-3 Alcohol Sensor

The MQ-3 module responds to alcohol vapour and provides a sensor signal for educational analogue-reading and threshold experiments. It is not a certified or calibrated breathalyser and must not be used to determine whether someone is safe or legally permitted to drive.

Infrared Obstacle Avoidance Sensor

The adjustable infrared obstacle avoidance module detects reflected infrared light from nearby objects. Keyestudio documents an approximate adjustable detection distance of 2–40cm under suitable conditions. Actual results vary with object colour, surface reflectivity, angle and ambient light.

LEDs, Buttons and Buzzer Experiments

The kit includes red, yellow and green LEDs, an additional digital white LED module, push-button hardware, an active buzzer and passive buzzer components. These parts introduce the relationship between digital inputs and outputs.

  • LED blinking and multi-LED sequences
  • Traffic-light simulations
  • Button-controlled lights and simple response games
  • Active buzzer alerts
  • Passive buzzer tones using program-generated frequencies
  • Digital input and output exercises

The passive buzzer requires an appropriate signal to generate different tones. Use suitable current-limiting resistors with conventional LEDs and follow the wiring diagrams in the learning guide.

Potentiometers and Resistor Colour Codes

Two 10K potentiometers allow learners to experiment with variable analogue input values. Read the potentiometer position through an analogue input and use the value in a program, for example to adjust LED brightness through PWM.

The included resistor colour code card supports resistor identification. The kit list specifies 330Ω, 1KΩ and 10KΩ resistors for circuit experiments.

Key Features of the KS0178 Sensor Starter Kit

  • Controller supplied: Includes one Keyestudio REV4 Arduino-compatible main control board.
  • Beginner learning path: Covers basic programming, circuit building and sensor interaction.
  • Multiple sensor types: Temperature, IR, touch, knock, tilt, MQ-3 and obstacle avoidance modules.
  • Reusable prototyping: 830-hole solderless breadboard and jumper wires for hands-on circuit assembly.
  • Basic electronic components: LEDs, resistors, potentiometers, buttons and buzzers.
  • Learning resources: Keyestudio tutorials include connection diagrams and sample code.

Keyestudio KS0178 Kit Contents

The following list is based on Keyestudio’s current KS0178 documentation. Check the physical package on delivery if an exact item or quantity is essential.

Component Quantity
330Ω Resistor 10
1KΩ Resistor 10
10KΩ Resistor 10
Red LED 5
Yellow LED 5
Green LED 5
10K Potentiometer 2
Passive Buzzer 1
Active Buzzer 1
Push Button 1
Blue Button Cap 2
Yellow Button Cap 2
830-Hole Breadboard 1
65-Piece Jumper Wire Set 1 set
20cm Male-to-Female Dupont Wires 10
Resistor Colour Code Card 1
Keyestudio REV4 Main Control Board 1
0.5m USB Cable 1
Digital White LED Module 1
Passive Buzzer Module 1
Knock Sensor Module 1
Tilt Sensor Module 1
DS18B20 Temperature Sensor Module 1
IR Receiver Module 1
IR Transmitter Module 1
Capacitive Touch Sensor Module 1
MQ-3 Alcohol Sensor Module 1
Obstacle Avoidance Sensor Module 1
Component Storage Box 1

Technical Overview

Brand Keyestudio
Model KS0178
Kit name Sensor Kit for Arduino Starters – K1
Main controller Keyestudio REV4 included
Programming platform Arduino-compatible programming
Breadboard 830-hole solderless breadboard
Temperature sensor DS18B20 digital module
Other sensors IR receiver/transmitter, capacitive touch, knock, tilt, MQ-3 and obstacle avoidance
Connection accessories USB cable, jumper wire set and male-to-female Dupont wires

Does the KS0178 Require Soldering?

Standard experiments are built around the solderless breadboard and pre-assembled sensor modules, so soldering is generally not required. Components can be inserted, tested, removed and reused as you work through different projects.

Projects You Can Build

After learning the supplied experiments, combine the controller, sensors and components to explore your own ideas, such as:

  • Temperature monitoring and alert projects
  • Infrared transmitter and receiver experiments
  • Touch-activated lights
  • Knock-triggered indicators or alarms
  • Tilt-sensitive warning systems
  • Obstacle detection experiments
  • Traffic-light simulations
  • Button-controlled electronic games
  • LED brightness control using a potentiometer

Who Is This Arduino Sensor Kit For?

  • Arduino and electronics beginners
  • Students learning programming and circuit fundamentals
  • STEM education activities and classroom demonstrations
  • Hobbyists starting with sensor modules
  • Makers learning conventional breadboard prototyping
  • Anyone looking for a starter kit with a controller board included
Usage note: The MQ-3 module is for educational sensor experiments only, not alcohol testing for driving or safety decisions. Always follow the module wiring and voltage instructions, use suitable current-limiting resistors, and avoid short circuits when powering the board.

Frequently Asked Questions

Does the KS0178 include a controller board?

Yes. The KS0178 kit includes one Keyestudio REV4 Arduino-compatible main control board.

Do I need to purchase an Arduino UNO separately?

No. The included Keyestudio REV4 controller provides the Arduino-compatible controller required for the standard KS0178 experiments.

Does the kit include a breadboard?

Yes. An 830-hole solderless breadboard is included for building prototype circuits.

Does the kit require soldering?

No soldering is normally required for the standard breadboard-based experiments. Components and jumper wires plug into the supplied solderless breadboard.

Does it include jumper wires?

Yes. The kit includes a 65-piece jumper wire set along with 20cm male-to-female Dupont wires.

Does it include a temperature sensor?

Yes. A DS18B20 digital temperature sensor module is included. Keyestudio documents a measurement range of approximately -55°C to +125°C.

Does it include infrared modules?

Yes. Both an IR receiver module and an IR transmitter module are included, allowing infrared detection and communication experiments.

Does it include an obstacle sensor?

Yes. An adjustable infrared obstacle avoidance sensor module is included. Keyestudio documents an approximate detection distance of 2–40cm under suitable conditions.

What is the MQ-3 module used for?

The MQ-3 module responds to alcohol vapour and is useful for educational gas-sensing and analogue sensor experiments. It is not a calibrated or certified breathalyser.

Is the KS0178 suitable for beginners?

Yes. It is designed as a Sensor Kit for Arduino Starters, with learning material that progresses through fundamental programming, electronics and sensor concepts.

What is the difference between this and an EASY Plug kit?

The KS0178 uses traditional breadboard and jumper-wire connections. This involves more manual wiring than an EASY Plug kit but provides experience with conventional breadboard prototyping and circuit construction.

Can the components be reused?

Yes. The controller, breadboard, sensors, LEDs, buttons and other components can be reused for your own Arduino and electronics projects after completing the supplied tutorials.

Why Buy from PcGuy Computers?

PcGuy Computers offers Keyestudio development boards, sensor kits, Arduino-compatible hardware, modules and electronic components for students, makers and DIY electronics projects in Pakistan. Check the product listing for current price and stock before ordering.

Buy the Keyestudio KS0178 Sensor Kit for Arduino Starters – K1 in Pakistan for a practical starter platform with a REV4 controller, breadboard, electronic components and multiple sensor modules. It is a useful choice for learning Arduino programming and building your first sensor-based circuits.

Manufacturer documentation: Keyestudio KS0178 product introduction and kit list.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio KS0178 Sensor Kit for Arduino Starters- K1”

Your email address will not be published. Required fields are marked *