Keyestudio KS0087 DIY Electronic Scale Kit (Arduino)

SKU: BC0001246 Category:
  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Build an Arduino-based digital weighing scale with the Keyestudio KS0087 DIY Electronic Scale Kit. It includes a 5kg load cell, HX711 24-bit weighing module, I2C 1602 LCD, Keyestudio control board, push button and assembly hardware for hands-on electronics and STEM learning.

  • Brand: Keyestudio
  • Model: KS0087
  • Sensor: 5kg load cell
  • Weighing Module: HX711 24-bit ADC
  • Display: I2C 1602 LCD (16×2)
  • Controller: Keyestudio / Arduino-compatible board
  • Functions: Weight reading and tare
  • Includes: 50g and 100g test weights
  • Battery: 18650 case included; battery not listed

₨8,800.00

6 in stock

6 in stock

Description

Build your own digital weighing scale with the Keyestudio KS0087 DIY Electronic Scale Kit. This Arduino-based educational kit combines a 5kg load cell, HX711 24-bit weighing amplifier, I2C 1602 LCD and a Keyestudio control board to create a working electronic scale. It is designed for hands-on learning in electronics, sensor interfacing, Arduino programming and STEM projects.

Key Features of Keyestudio KS0087

5kg Load Cell Sensor

Measure applied weight using the included 5kg strain-gauge weighing sensor.

HX711 24-bit Converter

Read the load cell’s very small electrical signal through a dedicated weighing amplifier and ADC module.

I2C 1602 LCD

Display the scale interface and measured weight on the included 16×2 character LCD.

Keyestudio Control Board

Program the scale using the included Keyestudio board and Arduino-compatible development workflow.

Tare Function

Use the included digital push button and sample project code to implement zero/tare functionality.

Hands-on Assembly

Build the scale using the supplied acrylic parts, mounting hardware, jumper wires and assembly instructions.

Calibration Learning

Experiment with calibration values and sensor readings to understand practical weighing measurements.

Arduino Programming

Explore sensor data, LCD output and program logic with the supplied example code and learning resources.

Build an Arduino-Powered Digital Scale

The KS0087 is a practical electronics project in which you assemble a digital weighing scale rather than simply using a finished device. The load cell detects force through tiny mechanical deformation. Its electrical output is then handled by the HX711 module, which provides a 24-bit analogue-to-digital conversion interface for the control board.

The control board processes the readings and the I2C 1602 LCD displays the result. The included push button can be used for the tare function shown in the project examples.

5kg Load Cell and HX711 Weighing Module

The included 5kg load cell is the scale’s weight-sensing component. It uses strain-gauge technology to produce a small electrical signal as force is applied. The HX711 is designed specifically for weighing applications and includes a low-noise programmable gain amplifier and 24-bit ADC.

The HX711 supports selectable channel gain and output data rates of 10Hz or 80Hz. The Keyestudio documentation describes channel A gain settings of 64 or 128 and channel B gain of 32.

I2C 1602 LCD and Push-Button Control

The included I2C 1602 LCD provides a 16-character, 2-line display for showing the project interface and weight readings. A digital push button is also included for interacting with the scale, including the tare operation demonstrated in the sample code.

Learn Calibration and Weight Measurement

Calibration is an important part of building a working scale. The sample project demonstrates how to use sensor readings, offset and correction values to convert raw measurements into weight values. Actual results depend on calibration, assembly, wiring, environmental conditions and the load cell setup. Keyestudio’s documentation notes that practical measurement error can be around 1% under its described setup, so this is an educational DIY scale rather than a certified commercial weighing instrument.

Keyestudio KS0087 Technical Specifications

Brand Keyestudio
Model KS0087
Product Type DIY Electronic Scale Kit
Weighing Sensor 5kg strain-gauge load cell
Weighing Interface HX711 24-bit ADC amplifier module
Display I2C 1602 LCD (16×2 characters)
Controller Keyestudio control board (Arduino-compatible)
Amplifier Gain Channel A: 64 or 128; Channel B: 32
HX711 Output Rate 10Hz or 80Hz
Project Functions Weight reading and tare operation
Programming Arduino IDE with sample code

What Is Included in the KS0087 Kit?

  • Keyestudio control board – 1
  • I2C 1602 LCD – 1
  • Keyestudio digital push button – 1
  • Keyestudio HX711 weighing module – 1
  • 5kg load cell sensor – 1
  • Upper and bottom scale boards – 1 each
  • R=120mm bearing acrylic board – 1
  • 15×11×4mm acrylic spacer – 2
  • 50g test weight – 1
  • 100g test weight – 1
  • Self-adhesive anti-slip pads – 4 pieces
  • M3×6mm round-head screws – 24
  • M3 nuts – 2
  • M4×10mm round-head screws – 2
  • M3×10mm copper standoffs – 8
  • M3×40mm copper standoffs – 3
  • 15cm female-to-female Dupont wires – 20
  • USB cable – 1
  • 18650 battery case – 1

Note: The kit list includes an 18650 battery case, not an 18650 battery. The battery itself is not listed as included. The kit is supplied as components for assembly, not as a pre-assembled weighing scale.

Educational Applications

  • Arduino and microcontroller learning
  • STEM classroom demonstrations
  • Load cell and sensor-interfacing experiments
  • Understanding HX711 signal conversion
  • LCD display and push-button programming
  • DIY measurement and maker projects

Frequently Asked Questions

What is the Keyestudio KS0087 DIY Electronic Scale Kit?

It is an Arduino-based educational kit for assembling a digital weighing scale using a load cell, HX711 module, LCD and control board.

What is the maximum capacity of the included load cell?

The kit documentation identifies the included weighing sensor as a 5kg load cell.

Does the KS0087 include an Arduino-compatible board?

Yes. The official kit list includes one Keyestudio control board. The manufacturer’s KS0087 starter-kit listing describes the kit as based on UNO R3.

What does the HX711 module do?

It amplifies and converts the small analogue signal from the load cell into digital readings that the control board can process.

Which display is included?

The kit includes an I2C 1602 LCD with a 16-character by 2-line display.

Does the scale support tare?

Yes. The included digital push button and sample code demonstrate a tare operation to zero the reading.

Are test weights included?

Yes. The kit list includes one 50g weight and one 100g weight for testing and calibration exercises.

Is an 18650 battery included?

The kit list includes an 18650 battery case, but it does not list an 18650 battery as included. Arrange a compatible battery separately if you intend to use battery power.

Does the kit require assembly?

Yes. The kit is supplied as separate components that you assemble using the included boards, wires and mounting hardware.

Can beginners use the KS0087?

It is designed as a learning project for students, makers and electronics enthusiasts. Basic familiarity with Arduino and following wiring instructions will help during assembly.

What programming environment does it use?

The project uses Arduino programming and the manufacturer provides sample code and learning resources.

Is the KS0087 a certified commercial weighing scale?

No. It is a DIY educational electronics kit. Measurement results depend on calibration and setup, and it should not be treated as a certified trade or laboratory instrument.

Buy the Keyestudio KS0087 DIY Electronic Scale Kit in Pakistan to explore Arduino programming, load cell technology and digital weight measurement through a practical build-it-yourself project.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Keyestudio KS0087 DIY Electronic Scale Kit (Arduino)”

Your email address will not be published. Required fields are marked *