2 18650 Battery Holder with Switch

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Use two removable 18650 lithium-ion cells in your DIY electronics or portable project with this battery holder featuring an integrated on/off switch and wired output leads. Check the holder’s cell configuration and output voltage before connecting it to your circuit.

  • Battery Format: 18650 Lithium-Ion
  • Capacity: 2 Cells
  • Switch: Integrated On/Off
  • Output: Wired Leads
  • Cells: Removable / Replaceable
  • Batteries Included: No
  • Important: Series/parallel wiring and built-in protection are not confirmed

₨1,100.00

120 in stock

120 in stock

Description

The 2 18650 Battery Holder with Switch is a removable two-cell holder for compatible 18650 lithium-ion batteries. It includes an integrated on/off switch and wired output leads, making it useful for DIY electronics, robotics and portable battery-powered prototypes.

Important: The electrical arrangement of the two cells (series or parallel) is not confirmed in the product details. Check the holder’s wiring or measure its output voltage and polarity before connecting it to a circuit. Batteries are not included.

Key Features

Dual 18650 Capacity

Designed to accommodate two compatible 18650 cylindrical lithium-ion cells.

Integrated On/Off Switch

Conveniently switches the holder’s output without removing the batteries or unplugging the leads.

Wired Output Leads

Provides wired connections for integration with suitable project circuits and power-management hardware.

Removable Cells

Allows compatible batteries to be installed and removed without soldering directly to the cells.

DIY Electronics

Useful for prototypes, sensor systems, portable electronics and educational projects.

Robotics Projects

Can form part of a suitable robot or mobile project power setup when paired with appropriate regulation and drivers.

Product Specifications

Product Type Battery holder with switch
Battery Format 18650 cylindrical cells
Cell Capacity 2 cells
Compatible Chemistry Compatible rechargeable lithium-ion cells
Switch Integrated on/off switch
Output Connection Wired leads
Cell Installation Removable / replaceable
Battery Configuration Series or parallel arrangement not confirmed; verify before use
Batteries Included No
Protection Circuit Not specified; do not assume a built-in BMS
Typical Applications DIY electronics, robotics, portable power and prototyping

Check the Battery Configuration Before Connecting

A dual-cell holder may be wired in series or parallel. The two arrangements produce different electrical outputs, and the holder’s appearance alone does not establish which configuration this product uses.

  • Series connection: Two conventional 3.6V–3.7V nominal Li-ion cells would provide around 7.2V–7.4V nominal and up to approximately 8.4V when fully charged.
  • Parallel connection: The voltage remains similar to one cell, while the combined capacity can increase when suitable matched cells are used.
  • Before use: Check the wiring or measure the output with a multimeter, confirming both voltage and polarity before connecting electronics.

Compatibility & Safe Use

  • Use compatible 18650 cells that physically fit the holder; protected cells may be longer than unprotected versions.
  • Install both cells according to the positive and negative markings.
  • Use cells of the same chemistry, type, capacity and similar age and condition.
  • Do not connect the holder directly to an Arduino, ESP32 or other controller until its actual output voltage is confirmed and suitable for that board’s input.
  • Use an appropriate voltage regulator or DC-DC converter if the project needs a stable supply voltage.

Battery Protection & Charging

The integrated switch is for output control; it is not a battery protection circuit. Do not assume the holder includes overcharge, over-discharge, over-current or cell-balancing protection. Use a correctly rated protection system where required by the battery design.

This holder is not a charger. Charge 18650 cells using a charger designed for their chemistry and configuration. Do not connect USB or another power source directly to the holder to charge the cells.

Prevent short circuits and insulate exposed leads. Lithium-ion cells can deliver high fault current; stop using damaged, swollen or overheated cells.

Frequently Asked Questions

How many batteries does this holder take?

It is designed to hold two compatible 18650 cylindrical cells.

Are the 18650 batteries included?

No. The product is the holder with switch and wired output leads; batteries are not included.

Does it have an on/off switch?

Yes. An integrated switch is provided to control the holder’s output.

What voltage does the holder output?

The output depends on whether its cells are wired in series or parallel. The exact configuration is not confirmed here, so verify the wiring or measure the output before connecting a device.

What voltage would two 18650 cells provide in series?

With conventional 3.6V–3.7V nominal lithium-ion cells, a series pair provides approximately 7.2V–7.4V nominal and up to about 8.4V when fully charged.

Can I power an Arduino with it?

Possibly, but first confirm the holder’s output configuration, voltage and polarity. Use a suitable regulated supply if the measured voltage is not within the board’s permitted input range.

Can I connect it directly to an ESP32?

Do not connect it directly without checking the actual output and the specific ESP32 board’s power-input requirements. A suitable regulator or converter may be needed.

Does the holder include a BMS?

No BMS is specified in the product details. Treat it as a holder and switch, and provide suitable battery protection separately where required.

Can I charge the batteries through the holder?

Do not assume it supports charging. Use a compatible external 18650 charger or a properly designed charging and protection circuit for the battery configuration.

Can I use protected 18650 cells?

Fit depends on the holder’s internal dimensions and spring travel. Protected cells can be longer than standard unprotected 18650 cells, so check their physical fit.

Can I mix different-capacity 18650 cells?

Using matched cells of the same type, capacity, age and condition is recommended, particularly when cells operate together in one pack.

Does the switch provide battery protection?

No. The switch controls the output but should not be treated as overcharge, over-discharge, over-current or short-circuit protection.

Why Buy from PcGuy Computers?

Electronics Components Browse related holders, modules and components for practical electronics projects.
Battery & Power Accessories Explore battery compartments and power-related accessories for DIY builds.
Practical Product Guidance Clear compatibility and electrical-use information helps you choose suitable components.
Pakistan-Focused Catalogue Product information and electronics selections for customers shopping in Pakistan.

Choose the 2 18650 Battery Holder with Switch for a removable two-cell battery mounting option with convenient output switching for compatible DIY electronics and portable projects.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “2 18650 Battery Holder with Switch”

Your email address will not be published. Required fields are marked *