125Khz RDM6300 RFID Reader Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The RDM6300 125kHz RFID Reader Module reads compatible low-frequency RFID cards and key fobs, commonly EM4100-compatible tags, and sends tag data through a UART serial interface. Suitable for Arduino, attendance and access-control prototypes. Verify antenna inclusion and 5V/logic-level requirements before wiring.

  • Frequency: 125kHz
  • Tag Compatibility: EM4100-compatible 125kHz tags
  • Interface: UART TTL serial
  • Baud Rate: 9600bps (common specification)
  • Supply: 5V DC (common specification)
  • Typical Read Range: 20–50mm, depending on tag and antenna
  • SKU: BC0002084

₨1,760.00

15 in stock

15 in stock

Description

The 125kHz RDM6300 RFID Reader Module is a low-frequency contactless reader for compatible RFID cards and key fobs, commonly using the EM4100 format. It sends detected tag identification data over a UART serial interface, making it useful for Arduino, access-control prototypes, attendance projects and embedded identification systems.

Read Compatible 125kHz RFID Tags

The RDM6300 is designed to read compatible 125kHz low-frequency tags. It is not a universal RFID or NFC reader: 13.56MHz cards such as many MIFARE and NFC tags are not compatible. Confirm that your card or key fob uses a supported 125kHz format before purchase.

Key Features

125kHz Low Frequency

Reads compatible 125kHz RFID cards and key fobs.

UART Serial Output

Sends tag data to a compatible microcontroller through a serial TX interface.

EM4100 Compatibility

Designed for EM4100-compatible identification tags and compatible variants.

External Antenna Connection

Provides antenna terminals for the compatible 125kHz loop antenna.

9600bps Communication

Common RDM6300 documentation specifies UART communication at 9600 baud.

Embedded Project Use

Useful for prototyping identification, access control and attendance applications.

Technical Specifications

Module RDM6300 RFID Reader
Operating Frequency 125kHz
RFID Compatibility EM4100-compatible 125kHz tags (verify exact tag type)
Communication Interface UART serial, TTL-level interface
Default Baud Rate 9600bps
Operating Voltage 5V DC (±5% in common RDM630 specifications)
Operating Current Less than 50mA (common RDM630 specification)
Typical Reading Distance Approximately 20–50mm; depends on tag, antenna and installation
Antenna External loop antenna connection; package inclusion not specified in this listing
Reader PCB Dimensions Approximately 38.5 × 19 × 9mm in common RDM630 documentation; confirm board revision
PcGuy SKU BC0002084

Connection and Microcontroller Integration

  • Provide a regulated 5V DC supply to the module’s correctly identified VCC and GND pins.
  • Connect the reader’s UART TX output to the microcontroller’s UART RX input.
  • Connect grounds together when using a separate power supply and controller.
  • Connect the compatible loop antenna to ANT1 and ANT2 on boards that provide these terminals.
  • Configure the receiving serial port for 9600 baud, using the correct framing for the board revision.
  • The module’s serial signal may be 5V logic. Check the controller’s input tolerance and use a suitable level shifter or divider when required; do not connect a 5V TX signal directly to a non-5V-tolerant 3.3V GPIO.

Compatible Applications

  • Arduino RFID identification and access-control prototypes.
  • Attendance and check-in projects using compatible 125kHz tags.
  • Electronic door-lock and cabinet-access prototypes.
  • Equipment identification and basic inventory projects.
  • Robotics, embedded systems and educational STEM experiments.

Important Compatibility Notes

  • This is a 125kHz LF reader, not a 13.56MHz NFC reader. It will not read ordinary NFC or MIFARE cards unless a tag specifically supports a compatible 125kHz format.
  • RDM6300 variants commonly read EM4100-compatible identification data. Do not assume support for every 125kHz tag technology or writable-tag functions.
  • Reading distance is affected by antenna type, tag size, orientation, nearby metal and electrical interference. A 20–50mm range is a typical reference, not a guaranteed distance for every setup.
  • The PcGuy listing names the reader module but does not explicitly confirm that a loop antenna, RFID card, key fob, cable or power supply is included.

What’s Included

1 × 125kHz RDM6300 RFID Reader Module, as stated in the PcGuy listing. The antenna and RFID tags are not confirmed as included accessories; please check with PcGuy if you need them supplied with the module.

Frequently Asked Questions

What frequency does the RDM6300 RFID reader use?

The RDM6300 operates at 125kHz and is designed for compatible low-frequency RFID tags.

Which RFID cards and key fobs are compatible?

It commonly supports EM4100-compatible 125kHz identification tags and compatible variants. Check the exact card or key-fob type; frequency alone does not guarantee compatibility.

Can it read 13.56MHz NFC or MIFARE cards?

No. This is a 125kHz low-frequency reader. Most 13.56MHz NFC and MIFARE cards use a different frequency and protocol.

How does the module communicate with Arduino?

It sends tag data through a UART serial interface. Connect the reader TX to the Arduino RX input, share ground and configure the serial connection to the module’s specified baud rate, commonly 9600bps.

Does the RDM6300 require 5V power?

Common RDM6300 specifications specify a 5V DC supply. Confirm the pin labels and voltage requirements on the exact board revision before powering it.

Can I connect it directly to an ESP32?

The UART data can be received by an ESP32, but check the reader’s TX logic level first. If its output is 5V, use a suitable level shifter or voltage divider for the ESP32’s 3.3V input.

What is the RFID reading distance?

Common RDM6300 documentation gives approximately 20–50mm. Actual range depends on the antenna, tag size, orientation, mounting and surrounding materials.

Does the module include an RFID antenna?

The product listing confirms an external antenna connection but does not explicitly list an antenna in the package. Confirm the supplied accessories with PcGuy before ordering.

Can the RDM6300 write data to RFID cards?

This listing describes the module as a reader and its common use is reading compatible tag identifiers. Do not assume it can write or reprogram cards.

Can I use it for an RFID attendance or door access project?

Yes, it can provide tag identification data for a compatible microcontroller-based prototype. A complete attendance or access-control system also needs suitable software, tag management and, for door control, properly designed driver and safety circuitry.

Buy the 125kHz RDM6300 RFID Reader Module in Pakistan for Arduino, access-control, attendance and embedded identification projects. Check tag compatibility, antenna inclusion and controller logic-level requirements before connecting the module.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “125Khz RDM6300 RFID Reader Module”

Your email address will not be published. Required fields are marked *