HC-SR04 Ultrasonic Sensor Fixed Mounting Bracket

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Securely position your HC-SR04 ultrasonic distance sensor with this fixed mounting bracket. Designed for Arduino robotics, obstacle detection, distance measurement and DIY automation projects, it helps keep the sensor aligned while leaving its dual transducers facing the measurement area.

  • Product: HC-SR04 fixed mounting bracket
  • Compatibility: HC-SR04 ultrasonic sensor module
  • Mounting: Fixed position; no pan/tilt movement
  • Design: Dual transducer access
  • Function: Mechanical sensor support and positioning
  • Applications: Robotics, obstacle detection, distance measurement and automation
  • Sensor: Not included unless specifically stated

₨330.00

20 in stock

20 in stock

Description

The HC-SR04 Ultrasonic Sensor Fixed Mounting Bracket provides a simple way to secure and position a compatible HC-SR04 ultrasonic distance sensor in Arduino, robotics, automation and DIY electronics projects. Its fixed-position design helps keep the sensor aligned for obstacle detection, proximity sensing and distance-measurement installations.

Key Features

HC-SR04 Compatibility

Designed to accommodate the common HC-SR04 ultrasonic sensor module.

Fixed Position Mount

Holds the sensor facing a consistent direction for stationary or moving project installations.

Dual Transducer Access

Provides openings for the HC-SR04’s ultrasonic transmitter and receiver to face the measurement area.

Robotics Integration

Useful for fitting a forward-facing distance sensor to a compatible robot chassis.

Cleaner Installation

Offers a dedicated mounting solution instead of leaving the sensor loosely supported.

Passive Accessory

No electronics, power connection or programming are required for the bracket itself.

Designed for the HC-SR04 Ultrasonic Sensor

The HC-SR04 module uses two front-facing ultrasonic transducers. This bracket is designed around that dual-transducer layout, supporting the sensor while allowing both transducers to face the area being monitored. Confirm the physical fit with your specific HC-SR04 board version before final installation.

Fixed Sensor Positioning for Robotics

A fixed mount keeps the sensor pointed in one direction. This is useful for forward-facing robot cars, obstacle-avoidance prototypes, equipment proximity detection, parking-distance experiments, wall-mounted sensing and other installations where the measurement area remains in a consistent direction.

On a robot, a typical setup may include an Arduino-compatible controller, HC-SR04 sensor, this mounting bracket, a motor driver, motors, chassis and a suitable power source. The bracket only provides mechanical support; the sensor and controller perform the distance measurement and navigation logic.

Obstacle Detection and Distance Measurement

The HC-SR04 measures distance by sending an ultrasonic pulse and timing the returning echo. A compatible microcontroller processes that timing to estimate the distance to a target. A stable mounting position helps keep the sensor’s direction consistent between readings.

The commonly quoted HC-SR04 measurement range is approximately 2cm to 400cm under suitable conditions. This bracket does not increase the sensor’s range, sensitivity or accuracy. Actual readings depend on the sensor, target size and surface, angle, temperature and surrounding environment.

Mounting and Alignment Tips

  • Keep both ultrasonic transducers unobstructed and facing the intended measurement area.
  • Avoid placing chassis panels, cables or enclosure edges directly in front of the transducers.
  • Secure the bracket so vibration does not continually change the sensor’s angle.
  • Hard, flat surfaces facing the sensor generally return stronger echoes than small, soft, angled or irregular targets.
  • Check the bracket’s physical fit and mounting arrangement with your sensor and project chassis.

Fixed Bracket vs Pan/Tilt Mount

This is a fixed mounting bracket; it does not rotate or scan automatically. It is suitable when the sensor should continuously face one direction. To scan multiple directions, a compatible servo-driven pan/tilt assembly and its additional wiring, power and control are required.

Sensor Wiring and Controller Compatibility

The bracket has no electrical connections and does not change the HC-SR04 wiring. A standard HC-SR04 module commonly uses four pins:

  • VCC: Sensor power
  • TRIG: Trigger input
  • ECHO: Echo output
  • GND: Ground

3.3V controller caution: Standard HC-SR04 modules are commonly powered at 5V and their ECHO output may be 5V logic. When using an ESP32, ESP8266 or Raspberry Pi, check the signal level and use a suitable voltage divider or level shifter to protect 3.3V GPIO inputs.

Indoor and Outdoor Use

The bracket is a mounting accessory; it does not make the HC-SR04 waterproof or weatherproof. The standard HC-SR04 should not be assumed suitable for exposed outdoor, wet or condensing environments. For those conditions, consider a suitably rated waterproof ultrasonic sensor such as an appropriate JSN-SR04T-style module.

Example Applications

  • Arduino robot cars and obstacle-avoidance robots
  • Distance and proximity measurement prototypes
  • Parking-distance experiments
  • Object detection and robot navigation
  • Automation and equipment monitoring
  • Educational robotics, STEM and DIY electronics
  • Custom enclosures and prototype installations

Product Specifications

Product Type Ultrasonic Sensor Mounting Bracket
Compatible Sensor HC-SR04 Ultrasonic Sensor Module
Mounting Style Fixed position
Adjustment No powered pan/tilt movement
Function Mechanical sensor support and positioning
Sensor Openings Dual ultrasonic transducer layout
Electronics None; passive mechanical accessory
Typical Applications Robotics, obstacle detection, distance measurement and automation
HC-SR04 Sensor Included No, unless specifically stated in the product package

What Is Included?

  • 1 × HC-SR04 Ultrasonic Sensor Fixed Mounting Bracket

The HC-SR04 sensor, controller board, wiring, mounting hardware and other project components are not included unless specifically stated in the supplied product package.

Frequently Asked Questions

Which sensor is this bracket designed for?

It is designed for the common HC-SR04 ultrasonic distance sensor module. Check the physical fit against your board version before installation.

Does the bracket include the HC-SR04 sensor?

No. This listing is for the fixed mounting bracket only unless the product package specifically states otherwise.

Can the bracket measure distance?

No. It is a passive mechanical accessory. A separately installed HC-SR04 sensor and compatible controller are needed for distance measurement.

Can I install it on an Arduino robot car?

Yes. It is suitable for mounting a compatible HC-SR04 in a fixed, forward-facing position on a robot project.

Does this bracket rotate or scan?

No. It is a fixed mount. Multi-direction scanning requires a suitable servo-driven pan/tilt assembly.

Does the bracket improve the HC-SR04 range or accuracy?

No. It provides mechanical support and positioning only. Measurement performance depends on the sensor, target and environment.

What is the typical HC-SR04 measurement range?

The HC-SR04 is commonly specified for approximately 2cm to 400cm under suitable conditions. Actual results vary with the target and installation.

Can I use the HC-SR04 with an ESP32?

Yes, with suitable electrical interfacing. The ECHO output may be 5V while ESP32 GPIO is 3.3V, so use an appropriate voltage divider or level shifter where required.

Is the standard HC-SR04 waterproof?

No. The standard HC-SR04 should not be treated as waterproof or weatherproof. Use a sensor designed for wet or exposed conditions where necessary.

Can I use this bracket for water-level monitoring?

The fixed mount can position a sensor for experimental level measurement, but the standard HC-SR04 is not waterproof. Choose an appropriately rated sensor for wet or humid installations.

Why Buy from PcGuy Computers?

Pakistan-focused support Product guidance for electronics, robotics and DIY projects in Pakistan.
Pakistan-wide shipping options Shipping options are available subject to destination and service availability.
Related project components Explore Arduino boards, ultrasonic sensors, robot chassis and other electronics components for your build.
Practical product guidance Clear product details and compatibility notes to help plan your installation.

Buy the HC-SR04 Ultrasonic Sensor Fixed Mounting Bracket from PcGuy Computers for secure sensor positioning in Arduino robot cars, obstacle-detection builds and distance-measurement projects in Pakistan.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “HC-SR04 Ultrasonic Sensor Fixed Mounting Bracket”

Your email address will not be published. Required fields are marked *