MAX3485 TTL to RS485 Module
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The MAX3485 TTL to RS485 Module converts UART serial signals to differential RS485 communication for half-duplex embedded and industrial networks. It is suitable for compatible 3.3V controller projects, Modbus RTU interfaces, remote sensors and longer-distance serial links.
- Transceiver: MAX3485
- Interface: UART TTL to RS485
- IC Supply: 3.3V DC
- Communication: Half-duplex RS485
- IC Data Rate: Up to 10Mbps (system-dependent)
- Bus: Differential A/B pair
- Applications: Modbus RTU, industrial control, remote monitoring
- Controller Use: Arduino, ESP32, STM32 and compatible UART systems (verify board pinout and electrical levels)
₨1,100.00
46 in stock
46 in stock
Description
The MAX3485 TTL to RS485 Module converts UART serial signals from a microcontroller into differential RS485 signals, and converts received RS485 data back to UART logic. Built around the MAX3485 transceiver, it supports half-duplex communication for embedded systems, Modbus RTU projects, remote monitoring and industrial control networks.
RS485 is useful when devices need to communicate over longer cable runs or in electrically noisy environments. The differential A/B bus helps improve noise rejection compared with ordinary single-ended UART wiring. Actual cable distance and reliable data rate depend on cable quality, wiring topology, termination, biasing, baud rate and the surrounding electrical environment.
Key Features
Bridges a microcontroller’s serial UART interface and an RS485 differential bus.
Uses a 3.3V RS485 transceiver designed for half-duplex communication.
Supports transmitting and receiving over the same differential bus pair.
Suitable for distributed controllers, remote sensors and multi-device serial networks when the bus is designed correctly.
Differential transmission helps reduce the effect of common-mode electrical noise.
Useful for Arduino, ESP32, STM32 and other UART-equipped controllers when their electrical levels and the module pinout are compatible.
Technical Specifications
| Transceiver IC | MAX3485 |
|---|---|
| Interface | UART TTL to RS485 |
| Supply voltage | 3.3V DC (MAX3485 IC supply) |
| Communication | Half-duplex RS485 |
| Data rate | Up to 10Mbps at the IC level; achievable module/network speed depends on wiring and system conditions |
| Bus signalling | Differential RS485 A/B pair |
| Typical applications | Modbus RTU, industrial control, remote sensors and serial data links |
| Controller use | UART-equipped microcontrollers with compatible electrical levels and pinout |
Note: The 10Mbps figure is the MAX3485 transceiver’s data-rate capability, not a guarantee for every assembled module or cable installation. The frequently quoted 1200-metre RS485 distance is not a guaranteed specification for this module; practical distance depends strongly on data rate, cable and network design. The exact board pin labels, termination/bias components and module layout should be checked on the supplied hardware.
How to Use the MAX3485 RS485 Module
- Connect the module’s supply and ground according to the board’s printed labels and confirm the required 3.3V supply before powering it.
- Connect the controller’s UART transmit and receive signals to the module’s corresponding logic-side pins, following the actual board pinout.
- Connect the RS485 A and B terminals to the matching differential bus pair. Keep polarity consistent across devices.
- Configure the controller’s UART settings to match the other devices on the network.
- Manage transmit/receive direction using the module’s enable arrangement as shown by its pin labels or documentation; do not assume the direction-control pins are automatically handled.
- For a multi-device or long cable bus, use appropriate twisted-pair cable, topology, termination and biasing for the network.
Compatible Projects and Applications
- Modbus RTU communication between controllers and industrial devices
- ESP32, STM32 and Arduino UART-based communication projects
- Remote temperature, humidity and other sensor networks
- Smart monitoring and metering prototypes
- Industrial automation and distributed control experiments
- Longer-distance serial links between embedded systems
Compatibility and Wiring Notes
The MAX3485 IC operates from a 3.3V supply and its datasheet specifies interoperability with 5V logic. However, the assembled module’s supply input, onboard circuitry and logic-side pin arrangement can vary between board versions. Check the actual module markings and documentation before connecting it to a 5V controller. Do not apply 5V to a 3.3V supply pin.
RS485 is a physical-layer standard, not a complete communication protocol. Devices still need compatible UART settings and a shared protocol such as Modbus RTU. A/B naming conventions can differ between manufacturers, so check device documentation if communication does not start.
Package Contents
- 1 × MAX3485 TTL to RS485 Module
Frequently Asked Questions
What does the MAX3485 TTL to RS485 Module do?
It converts UART serial data from a controller into differential RS485 signals and converts received RS485 data back to UART logic.
Is the MAX3485 a half-duplex module?
Yes. The MAX3485 transceiver is designed for half-duplex RS485 communication, where transmission and reception share the same differential bus pair.
What voltage does the MAX3485 use?
The MAX3485 IC operates from a 3.3V supply. Check the assembled board’s labels and documentation to confirm its required supply connection; never assume a board’s VCC pin accepts 5V.
Can I use this module with an ESP32?
It can be used in an ESP32 UART project when the module’s supply, logic connections and direction-control arrangement match the ESP32 and the actual board pinout.
Can I connect it to a 5V Arduino?
The MAX3485 IC is specified as interoperable with 5V logic, but the complete module’s supply and interface circuitry must also be suitable. Verify the board version and do not connect 5V to its 3.3V supply input.
What is the maximum data rate?
The MAX3485 IC supports data rates up to 10Mbps. The practical rate of an assembled module and RS485 network depends on cable length, cable characteristics, termination, topology and electrical conditions.
Can this module be used for Modbus RTU?
Yes. It can provide the RS485 physical-layer connection for a Modbus RTU system, but the controller still needs suitable Modbus software and matching serial settings.
Does RS485 support long-distance communication?
RS485 is commonly used for longer cable runs than ordinary UART wiring. The achievable distance is dependent on baud rate, cable type, bus layout, termination and noise; 1200 metres should not be treated as a guaranteed range for this module.
Do I need to control transmit and receive direction?
Half-duplex MAX3485 designs use driver-enable and receiver-enable control. Check the module’s actual pinout and onboard connections to determine whether direction must be controlled by the microcontroller.
What is included in the package?
The listed package contents are one MAX3485 TTL to RS485 Module. Cables and other accessories are not specified as included.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.