DC-DC 12V to 3.3V 5V Multi Output Power Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Step down a 12V DC supply to 3.3V and 5V with this compact DC-DC Multi-Output Power Module. Designed for compatible Arduino, ESP8266, ESP32, sensor, robotics and DIY electronics projects.

  • Module Type: DC-DC Step-Down / Buck Converter
  • Input Voltage: 12V DC (as listed)
  • Output Voltages: 3.3V DC and 5V DC
  • Function: Voltage Regulation / Power Conversion
  • Applications: Microcontrollers, sensors and embedded electronics
  • Compatibility: Arduino / ESP8266 / ESP32 / DIY Electronics

Warranty: 1 Year Store Warranty. Exact maximum output current is not specified; confirm load requirements before use.

₨1,320.00

194 in stock

194 in stock

Description

The DC-DC 12V to 3.3V / 5V Multi-Output Power Module converts a 12V DC input into two lower-voltage supply rails: 3.3V DC and 5V DC. It is designed for electronics prototyping and projects that need these common logic and sensor supply voltages from a 12V source.

12V to 3.3V and 5V Power Conversion

This compact DC-DC step-down module provides separate 3.3V and 5V outputs from a 12V DC supply. It can be used as a power-regulation stage in Arduino setups, ESP8266 and ESP32 projects, sensor circuits, robotics prototypes and other low-voltage embedded electronics.

Use the module to supply the required voltage rail to compatible components rather than connecting 12V directly to a 3.3V or 5V input. Confirm the board’s input polarity, output labels and load requirements before powering your circuit.

Key Features

Dual Output Rails

Provides 3.3V DC and 5V DC outputs from a 12V DC input.

Step-Down Conversion

Designed to reduce the input supply voltage for lower-voltage electronics.

Compact Module

A practical power-conversion board for prototyping and embedded projects.

Multiple Project Uses

Suitable for compatible microcontroller, sensor, robotics and DIY electronics circuits.

Technical Specifications

  • Product: DC-DC 12V to 3.3V / 5V Multi-Output Power Module
  • Module Type: DC-DC step-down / buck converter
  • Input Voltage: 12V DC (as listed)
  • Output Voltages: 3.3V DC and 5V DC
  • Function: Voltage regulation and power conversion
  • Typical Applications: Microcontroller, sensor and embedded-system power
  • Listed Compatibility: Arduino, ESP8266, ESP32 and DIY electronics projects
  • Warranty: 1-year store warranty

Current capacity and board-specific details: The exact board revision and maximum output current are not identified in the supplied product information. Check the module label or confirm its load rating before connecting components with significant current demand. The 3.3V and 5V outputs should not be assumed to support the same load simultaneously without a confirmed rating.

Suitable Applications

  • Arduino development and prototyping projects
  • ESP8266 and ESP32-based electronics projects, where the required supply current and voltage are within the module’s rating
  • Low-voltage sensor and control circuits
  • Robotics and DIY electronics builds
  • Embedded-system projects requiring 3.3V and 5V supply rails

What’s Included

  • 1 × DC-DC 12V to 3.3V / 5V Multi-Output Power Module

Important Usage Notes

  • Use a regulated or otherwise suitable 12V DC source and verify input polarity before connection.
  • Check the board’s printed input and output markings; do not rely on wire colour alone.
  • Do not exceed the module’s rated output current. The exact current rating is not confirmed in this listing.
  • Check the supply requirements of your Arduino, ESP board or sensor before connecting it.
  • This is a DC power-conversion module, not a USB data interface or a battery charger.

Why Buy from PcGuy Computers?

  • Product information presented for electronics and DIY project use
  • 1-year store warranty as listed
  • Support for product-related questions

Frequently Asked Questions

What does this DC-DC power module do?

It steps down a 12V DC input and provides 3.3V DC and 5V DC output rails for compatible electronic circuits.

What input voltage does this module require?

The PcGuy product listing specifies a 12V DC input. Confirm the board markings and supply polarity before connecting power.

What output voltages are available?

The listed outputs are 3.3V DC and 5V DC.

Can I use it with an Arduino?

Yes, it is listed for Arduino projects. Match the selected output to the board or peripheral’s required input voltage and current.

Is it suitable for ESP8266 and ESP32 projects?

It is listed for ESP8266 and ESP32 projects. Use the 3.3V rail only where the connected board’s power-input arrangement supports it, and verify that the module can supply the required current.

What is the maximum output current?

The exact maximum output current is not stated in the supplied PcGuy product specifications. Please confirm the rating for the specific board before powering a load.

Can the 3.3V and 5V outputs be used at the same time?

The module is described as a multi-output board with both voltage rails. However, the combined output-current limit is not specified here, so confirm the board’s rating before using both outputs under load.

Can I connect a 12V device to the 3.3V or 5V output?

No. The 3.3V and 5V outputs are intended for components that require those lower voltages. A 12V-rated device needs an appropriate 12V supply.

Does this module include a USB connection?

A USB connection is not specified in the product information. It is listed as a DC-DC power module.

What warranty is included?

The PcGuy listing specifies a 1-year store warranty. Contact the store for warranty terms and claim requirements.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “DC-DC 12V to 3.3V 5V Multi Output Power Module”

Your email address will not be published. Required fields are marked *