HW-038 Water Level Detection Sensor Module

  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The HW-038 Water Level Detection Sensor Module uses conductive sensing tracks to detect water contact and provide an analogue signal for relative water-level monitoring. Suitable for Arduino and compatible DIY electronics projects.

  • Model: HW-038
  • Sensor Type: Conductive Water Level Sensor
  • Operating Voltage: 3V–5V DC (common HW-038 specification)
  • Operating Current: Less than 20mA (common specification)
  • Output: Analogue Signal
  • Detection Area: Approx. 40 × 16mm
  • Applications: Water contact detection, monitoring and STEM projects

Warranty: 1 Year Store Warranty. Avoid continuous powered immersion to reduce corrosion.

₨880.00

27 in stock

27 in stock

Description

The HW-038 Water Level Detection Sensor Module is a conductive, analogue water-sensing board for detecting water contact and estimating relative water level. Its exposed parallel conductive tracks change electrical resistance as water reaches more of the sensing area, producing an analogue signal that a compatible microcontroller can read.

Conductive Water Level Detection

The HW-038 is designed for simple water presence and level-monitoring experiments. Connect its power and ground pins, then read the signal output with an analogue input on a compatible controller. As the wetted area changes, the analogue reading changes, allowing a program to set its own thresholds for alarms or pump-control logic.

This is a basic contact-based sensor rather than a sealed industrial level transmitter. It is best suited to educational, prototype and DIY applications where periodic water contact can be monitored.

Key Features

Conductive Sensing

Uses exposed conductive tracks to detect water contact across the sensing surface.

Analogue Output

Provides a changing analogue signal for reading water contact or relative level.

Low-Power Operation

Common HW-038 specifications list operating current below 20mA.

Microcontroller Projects

Useful for Arduino-based monitoring, alarms and learning projects with a suitable ADC input.

Technical Specifications

  • Model: HW-038
  • Sensor Type: Conductive water level / water contact sensor
  • Detection Method: Exposed parallel conductive tracks
  • Operating Voltage: 3V–5V DC (common HW-038 specification)
  • Operating Current: Less than 20mA (common HW-038 specification)
  • Output: Analogue signal
  • Effective Detection Area: Approximately 40 × 16mm
  • Typical Interface: VCC, GND and signal
  • Applications: Water contact detection, relative level monitoring and DIY electronics
  • Warranty: 1-year store warranty (as listed)

Output clarification: Standard HW-038 water-sensing boards are commonly documented as analogue-output sensors. The supplied product text also mentions analogue and digital outputs and an optional potentiometer, but those features may belong to a different board variant or an additional comparator circuit. They are not presented here as confirmed features of this stock item.

Suitable Applications

  • Water contact and rising-level demonstrations
  • Arduino water-level monitoring experiments
  • DIY water alarms and threshold-based notifications
  • Educational STEM and electronics projects
  • Prototype reservoir and container monitoring

For an automatic pump or safety-critical tank-control system, use appropriate control circuitry, electrical isolation and a sensor designed for continuous service. This exposed-track sensor is not a substitute for a certified industrial level sensor.

Connection and Usage Notes

  • Connect VCC to a supported 3V–5V supply, GND to circuit ground and the signal pin to a suitable analogue input.
  • Check the exact board labels and supply requirements before wiring.
  • Keep the electronic connector and controller away from water; only expose the sensing area as required.
  • Do not leave the conductive sensing surface continuously powered and wet. Intermittent powering can help reduce electrochemical corrosion.
  • Rinse and dry the sensing surface after use where appropriate, and inspect it for corrosion over time.
  • Water conductivity, impurities and temperature can affect readings; calibrate thresholds in the actual application.
  • Do not use with corrosive chemicals or assume it is suitable for every conductive liquid.

What’s Included

  • 1 × HW-038 Water Level Detection Sensor Module

Warranty

The supplied PcGuy product listing states a 1-year store warranty. Contact PcGuy Computers for the applicable warranty terms and claim process.

Why Buy from PcGuy Computers?

  • Product information for electronics and STEM projects
  • Warranty information stated on the product listing
  • Support for product-related questions

Frequently Asked Questions

What does the HW-038 water level sensor do?

It detects water contact using exposed conductive tracks and provides an analogue signal that can be used to estimate relative water level.

What operating voltage does the HW-038 require?

Common HW-038 specifications list a 3V–5V DC supply. Check the markings on your particular board before powering it.

Does this sensor provide analogue or digital output?

The standard HW-038 conductive sensing board is commonly documented with an analogue output. A digital threshold output or adjustment potentiometer should only be expected if the supplied version includes the corresponding comparator circuit.

Can I use the HW-038 with Arduino?

Yes. Connect its signal output to a suitable Arduino analogue input and read the changing value in your sketch.

Can I use it with an ESP32 or ESP8266?

It can be used in compatible microcontroller projects if the sensor output voltage stays within the controller’s ADC input limits. In particular, do not feed a 5V signal directly into a 3.3V-only input; use a suitable divider or level interface where required.

Can it measure an exact water depth?

It provides a relative analogue response to the wetted area, not a calibrated measurement in centimetres. Readings depend on installation, water conductivity and sensor geometry, so application-specific calibration is needed.

Can I leave the sensor in water continuously?

Continuous wet operation is not recommended for this exposed conductive-track type. Corrosion and electrochemical wear can occur; power it intermittently and inspect the sensing surface.

Is the HW-038 waterproof?

The exposed sensing board is designed to contact water, but the complete PCB and its connector should not be treated as a sealed waterproof assembly. Keep the electronics and connections dry.

Can it control a water pump directly?

No. Its signal is intended for a microcontroller or suitable control circuit. A pump requires a correctly rated driver, relay or switching device and appropriate electrical protection.

What warranty is included?

The supplied PcGuy listing states a 1-year store warranty. Contact the store for the applicable warranty terms and claim process.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “HW-038 Water Level Detection Sensor Module”

Your email address will not be published. Required fields are marked *