30W PS1502D 15V 2A Adjustable Lab Linear Variable DC Power Supply

SKU: BC0000611 Category:
  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The PS1502D 30W Adjustable DC Bench Power Supply is designed for electronics testing, prototyping, repair work and DIY projects. It provides adjustable 0–15V DC output and up to 2A current, with LED voltage/current meters and CV/CC operation for controlled bench testing.

  • Model: PS1502D
  • Output Voltage: 0–15V DC Adjustable
  • Output Current: 0–2A Adjustable
  • Maximum Output: 30W
  • Regulation: Linear (listed configuration)
  • Modes: Constant Voltage / Constant Current
  • Display: LED Voltage & Current
  • Warranty: 1 Year Store Warranty

Note: Maximum output is 30W (15V × 2A). Confirm voltage, polarity and current requirements before connecting a device.

₨11,000.00

4 in stock

4 in stock

Description

The PS1502D 30W Adjustable DC Bench Power Supply is a compact laboratory power source for electronics testing, circuit development, repair work and DIY projects. It provides an adjustable DC output from 0–15V and an adjustable current limit up to 2A, with a maximum rated output of 30W.

Voltage and current controls let you set the supply to suit the circuit under test. Its LED meters make it easier to monitor the output while working on prototypes, modules and low-power electronic equipment.

Key Features

Adjustable 0–15V DC Output

Set the output voltage across a 0–15V range for testing and powering compatible low-voltage electronic circuits.

Adjustable 0–2A Current Limit

Set the current limit up to 2A to help control the maximum current available to a circuit during bench testing.

30W Maximum Output

With a 15V maximum output and 2A maximum current, the rated maximum output is 30W. Actual available power depends on the voltage and current settings.

Linear Regulation Design

The listed linear supply design is intended for stable DC bench power and low-noise electronics work. Actual ripple and regulation depend on the unit specification.

LED Voltage & Current Display

View output voltage and current on the front-panel LED meters while adjusting settings and monitoring a connected load.

Constant Voltage & Current Operation

CV and CC operating modes support voltage regulation or current limiting, depending on the connected load and selected settings.

Suitable Applications

  • Electronics prototyping: Supply adjustable DC power to compatible prototype circuits and development boards.
  • PCB and component testing: Apply a controlled voltage and current limit when checking low-voltage boards and components.
  • Repair workshops: Use as a bench supply for suitable electronics troubleshooting and repair tasks.
  • Education and learning: Demonstrate voltage, current and basic power-supply behaviour in electronics labs.
  • DIY projects: Power compatible low-voltage modules and small electronic projects within the unit’s 30W rating.

Technical Specifications

Product type Adjustable DC bench / laboratory power supply
Model PS1502D
Rated output power 30W maximum
Output voltage 0–15V DC adjustable
Output current 0–2A adjustable
Regulation type Linear (as listed for this product)
Operating modes Constant Voltage (CV) / Constant Current (CC)
Display LED voltage and current meters
Input supply 220–240V AC (listed specification; check rear-panel rating before use)
Protection Current limiting / overload protection (model listing)
Warranty 1 year store warranty (as listed)
Power calculation: 30W is the maximum rated output (15V × 2A). You cannot draw 2A at every voltage if the total output exceeds 30W. Confirm the voltage and current requirements of your device before connecting it.

How to Use the PS1502D Safely

  • Check the connected device’s required voltage and polarity before switching on the output.
  • Set the voltage and current limit before connecting sensitive electronics.
  • Start with a conservative current limit and increase it only when the circuit requirements are known.
  • Use a properly grounded mains outlet and keep ventilation openings clear.
  • Do not exceed the supply’s 15V, 2A or 30W maximum ratings.
  • Switch off the output before changing wiring or moving connections.

What’s Included?

The listed package includes the PS1502D DC power supply unit and a power cable. Output leads and printed documentation may vary by supplied batch; please confirm the exact accessories before ordering if a particular lead or manual is essential.

Why Buy from PcGuy Computers?

✓ Pakistan-Wide Order Support
✓ Help with Voltage & Current Selection
✓ Clear Product & Warranty Details
✓ Local Customer Assistance
✓ After-Sales Order Support

Frequently Asked Questions

What is the output voltage range of the PS1502D?

The PS1502D provides an adjustable DC output from 0V to 15V. Set the voltage to match the requirements of the device or circuit being tested.

What is the maximum current output?

The adjustable current range is up to 2A. The current limit should be set according to the requirements of the connected circuit.

Why is this power supply rated at 30W?

Its maximum output rating is 15V multiplied by 2A, which equals 30W. The combined voltage and current draw must stay within this limit.

What is the difference between CV and CC modes?

Constant Voltage (CV) mode regulates the set voltage while the load draws current within the limit. Constant Current (CC) mode limits current to the set value when the load requires it.

Can I use the PS1502D for PCB and electronics repair?

It can be used for suitable low-voltage electronics testing and repair tasks, provided the required voltage, current, polarity and power remain within the supply’s ratings.

Does it display voltage and current?

Yes. The listed PS1502D configuration has LED meters for monitoring output voltage and current.

Does the PS1502D have short-circuit protection?

The product listing specifies current-limiting / overload protection. Protection behaviour can vary by manufacturer revision, so do not intentionally short the output; follow the supplied unit instructions.

What is included in the box?

The listed package includes the power supply and power cable. Output leads and documentation may vary by batch; contact PcGuy Computers to confirm exact accessories before ordering.

Can I use it with any electronic device?

No. The connected device must be compatible with an adjustable 0–15V DC supply and must not exceed 2A or 30W. Always verify polarity and voltage requirements first.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “30W PS1502D 15V 2A Adjustable Lab Linear Variable DC Power Supply”

Your email address will not be published. Required fields are marked *