Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s

SKU: BC0000614 Category:
  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The Hantek DSO5102P is a 2-channel digital storage oscilloscope for electronics testing, circuit debugging, servicing and education. It offers 100MHz bandwidth, up to 1GSa/s real-time sampling, a 7-inch colour display, waveform storage, automatic measurements, FFT maths and USB connectivity.

  • Brand: Hantek
  • Model: DSO5102P
  • Bandwidth: 100MHz
  • Channels: 2
  • Real-Time Sampling: Up to 1GSa/s
  • Equivalent-Time Sampling: Up to 25GSa/s
  • Record Length: Up to 40K points
  • Display: 7-inch colour LCD, 800 × 480
  • Connectivity: USB host and device

Note: 25GSa/s is equivalent-time sampling for repetitive signals; real-time sampling is up to 1GSa/s. Confirm included accessories and warranty terms for the supplied batch.

₨77,000.00

3 in stock

3 in stock

Description

The Hantek DSO5102P Digital Storage Oscilloscope is a two-channel bench instrument for observing, capturing and analysing electrical signals. With 100MHz bandwidth and a 1GSa/s real-time sampling rate, it is designed for electronics development, circuit debugging, education, servicing and repair work.

Its 7-inch colour display, waveform storage, automatic measurements, trigger functions and USB connectivity make it useful for viewing signal behaviour and reviewing captured waveforms at the workbench.

Key Features

100MHz Analog Bandwidth

Supports signal observation up to its rated 100MHz bandwidth, making it suitable for a range of analogue and digital electronics testing tasks.

Two Independent Input Channels

Connect two signals and compare their timing, amplitude and relationship on the same display during circuit troubleshooting.

1GSa/s Real-Time Sampling

Captures waveform samples at up to one billion samples per second in real-time operation, helping reveal signal details within the instrument’s limits.

7-Inch Colour WVGA Display

The 800 × 480 colour LCD gives a clear view of waveforms, measurement readouts and instrument menus while testing.

40K Record Length & Acquisition Modes

Up to 40K record length with Normal, Peak Detect and Average acquisition modes supports waveform capture, glitch observation and noise reduction.

Triggering, Measurements & FFT

Edge, pulse-width and video-related trigger options help stabilise waveform views. Automatic measurements and FFT maths assist signal analysis.

USB Host & Device Connectivity

USB connectivity supports instrument-to-PC communication and USB storage workflows, with PC analysis software available for supported systems.

What Can You Use the DSO5102P For?

  • Circuit debugging: Observe clock, pulse and control signals while diagnosing electronic circuits.
  • Power electronics: Inspect ripple, switching behaviour and transient waveforms within safe input limits and suitable probe ratings.
  • Embedded development: Compare timing and signal activity across two points in a microcontroller or digital circuit.
  • Repair and servicing: Check signal presence, frequency, amplitude and timing when troubleshooting electronic equipment.
  • Education and training: Demonstrate waveform shape, frequency, voltage, triggering and basic signal analysis.

Technical Specifications

Brand Hantek
Model DSO5102P (DSO5000P series)
Instrument type Digital storage oscilloscope
Analog bandwidth 100MHz
Number of channels 2
Real-time sample rate Up to 1GSa/s
Equivalent-time sample rate Up to 25GSa/s
Record length Up to 40K points
Display 7-inch colour TFT LCD
Display resolution 800 × 480 (WVGA)
Vertical resolution 8-bit
Input coupling AC / DC / GND
Input impedance 1MΩ ±2% in parallel with 20pF ±3pF
Vertical scale 2mV/div to 10V/div
Acquisition modes Normal, Peak Detect, Average
Math functions +, −, ×, ÷ and FFT
Connectivity USB host and USB device
Input safety: Always check the oscilloscope’s manual, probe attenuation setting and input voltage limits before connecting a signal. Never connect mains or high-voltage circuits directly unless the measurement setup, probe and safety category are appropriate. Exceeding the specified input limits can damage the instrument and create an electric-shock hazard.

Understanding the Sampling Rate

The DSO5102P supports up to 1GSa/s real-time sampling. Hantek also lists up to 25GSa/s equivalent-time sampling for repetitive signals. Equivalent-time sampling is not the same as capturing a single, non-repetitive event at 25GSa/s; use the real-time rating when evaluating single-shot capture requirements.

What’s Included?

The listed package includes the Hantek DSO5102P oscilloscope, two probe sets, power cable, USB cable and user manual. Please confirm the exact probe model, accessories and regional power-cable configuration with PcGuy Computers before ordering.

Why Buy from PcGuy Computers?

✓ Pakistan-Wide Order Support
✓ Help Choosing the Right Test Instrument
✓ Clear Product & Warranty Details
✓ Local Customer Assistance
✓ After-Sales Order Support

Frequently Asked Questions

What is the bandwidth of the Hantek DSO5102P?

The DSO5102P has a 100MHz analog bandwidth, according to Hantek’s model specifications.

How many channels does this oscilloscope have?

It has two input channels, allowing you to observe and compare two signals at the same time.

What is its maximum sampling rate?

The maximum real-time sampling rate is 1GSa/s. Hantek also lists up to 25GSa/s equivalent-time sampling for repetitive signals.

What does 40K record length mean?

It refers to a waveform record of up to 40,000 sample points. The actual record length and sample rate available together depend on acquisition and time-base settings.

Can I connect the DSO5102P to a computer?

Yes. It provides USB host and USB device connectivity, and Hantek lists PC software for real-time analysis. Software compatibility depends on the computer operating system and software version.

Does it support FFT analysis?

Yes. The oscilloscope includes FFT as a maths function, which can help examine the frequency components of a waveform.

Can I use it for electronics repair?

Yes. It is suitable for many signal observation and troubleshooting tasks in electronics servicing, development and repair, provided the signal is within the instrument and probe ratings.

Are probes included with the oscilloscope?

The listed package includes two probe sets. Confirm the exact probe model and attenuation options supplied with the current batch before purchase.

Is the 25GSa/s rate the same as real-time sampling?

No. The 1GSa/s figure is the real-time sampling rate. The 25GSa/s figure is equivalent-time sampling, which applies to repetitive signals and should not be treated as single-shot real-time performance.

Can I measure mains voltage directly?

Do not connect mains voltage directly without checking the instrument’s input limits, probe rating and measurement safety category. Use an appropriately rated differential probe or safe measurement arrangement and qualified procedures.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s”

Your email address will not be published. Required fields are marked *