Hantek DSO2C15 Digital Storage Oscilloscope 150MHZ Bandwidth Dual Channel 1GSa/s
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Hantek DSO2C15 is a two-channel 150MHz digital storage oscilloscope for electronics development, circuit debugging, repair and signal analysis. It supports up to 1GSa/s single-channel real-time sampling, 7-inch colour TFT display, up to 8Mpts memory depth, serial bus decoding, FFT and USB connectivity.
- Brand: Hantek
- Model: DSO2C15
- Bandwidth: 150MHz
- Channels: 2
- Sampling Rate: 1GSa/s single channel; 500MSa/s per channel with two channels
- Memory Depth: 8Mpts single channel; 4Mpts two channels
- Display: 7-inch colour TFT, 800 × 480
- Serial Decode: UART, LIN, CAN, SPI, I²C
- Connectivity: USB host and device
- Waveform Generator: Not included on DSO2C15
Note: Sampling rate and memory depth vary with the number of active channels. DSO2C15 does not include the waveform generator found on DSO2D models.
₨77,000.00
3 in stock
3 in stock
Description
The Hantek DSO2C15 Digital Storage Oscilloscope is a two-channel bench instrument for observing, capturing and analysing electrical signals. With 150MHz bandwidth and up to 1GSa/s single-channel real-time sampling, it is designed for electronics development, circuit debugging, servicing, education and repair work. When both channels are active, the maximum sampling rate is 500MSa/s per channel.
Its 7-inch colour TFT display, 8Mpts single-channel memory depth, trigger and serial-bus decode functions, automatic measurements, FFT analysis and USB connectivity make it a capable tool for waveform inspection at the workbench.
Key Features
Observe signals up to the instrument’s rated 150MHz bandwidth for a broad range of analogue and digital electronics testing tasks.
View and compare two electrical signals at the same time to investigate timing, amplitude and signal relationships in a circuit.
Supports up to 1GSa/s real-time sampling with one channel active. With two channels active, the maximum rate is 500MSa/s per channel.
Capture longer waveform records with up to 8Mpts memory on a single channel, or up to 4Mpts when both channels are used.
The 800 × 480 colour display presents waveform traces, measurement values and instrument menus in a clear bench-top layout.
Supports protocol trigger and decode options including UART, LIN, CAN, SPI and I²C to assist embedded-system troubleshooting.
Use automatic measurement functions, mathematical operations and FFT analysis to examine waveform values and frequency components.
USB host and device interfaces support PC communication and saving waveform data, settings and screenshots to supported USB storage.
What Can You Use the DSO2C15 For?
- Electronics development: Inspect analogue and digital signals while designing or testing circuit boards.
- Embedded systems: Trigger on and decode supported UART, LIN, CAN, SPI and I²C signals during microcontroller debugging.
- Power supply testing: Examine ripple, switching waveforms and transients using correctly rated probes and safe measurement methods.
- Repair and diagnostics: Check signal presence, frequency, amplitude and timing when troubleshooting electronic equipment.
- Education and training: Demonstrate waveform behaviour, triggering, sampling, measurements and frequency-domain analysis.
Technical Specifications
| Brand | Hantek |
|---|---|
| Model | DSO2C15 (DSO2000 series) |
| Instrument type | Digital storage oscilloscope |
| Analog bandwidth | 150MHz |
| Oscilloscope channels | 2 |
| Real-time sampling rate | 1GSa/s (single channel); 500MSa/s (two channels) |
| Memory depth | 8Mpts (single channel); 4Mpts (two channels) |
| Display | 7-inch colour TFT LCD |
| Display resolution | 800 × 480 |
| Vertical resolution | 8-bit |
| Vertical sensitivity | 2mV/div to 10V/div |
| Input coupling | AC / DC / GND |
| Input impedance | 1MΩ ±2% in parallel with 13pF ±3pF |
| Maximum input rating | 300V CAT II (observe probe and instrument limits) |
| Acquisition modes | Normal, Peak Detect, Average, High Resolution |
| Trigger types | Edge, Pulse Width, Video, Slope, Timeout, Window, Pattern, Interval, Under Amp and supported serial buses |
| Serial bus decode | UART, LIN, CAN, SPI, I²C |
| Math functions | Add, subtract, multiply, divide and FFT |
| Connectivity | USB host and USB device |
| Waveform generator | Not included on DSO2C15 (generator is available on DSO2D models) |
What’s Included?
The current product listing specifies the DSO2C15 oscilloscope, two probe sets, power cable, USB cable and user manual. Confirm the exact probe model, accessory configuration and regional power-cable details with PcGuy Computers before ordering.
Why Buy from PcGuy Computers?
✓ Help Choosing the Right Test Instrument
✓ Clear Product & Warranty Details
✓ Local Customer Assistance
✓ After-Sales Order Support
Frequently Asked Questions
What is the bandwidth of the Hantek DSO2C15?
The DSO2C15 has a 150MHz analog bandwidth, according to Hantek’s DSO2000 series specifications.
How many channels does the DSO2C15 have?
It has two oscilloscope input channels, allowing you to observe and compare two signals simultaneously.
Does it sample at 1GSa/s on both channels?
No. The maximum real-time rate is 1GSa/s with one channel active. When both channels are active, the maximum is 500MSa/s per channel.
What is the memory depth?
Hantek specifies up to 8Mpts in single-channel operation and up to 4Mpts when both channels are active.
Does the DSO2C15 have a built-in waveform generator?
No. The DSO2C15 is an oscilloscope-only model. A built-in arbitrary waveform generator is offered on the DSO2D models in the DSO2000 series.
Can it decode UART, CAN, SPI and I²C signals?
Yes. The DSO2C15 supports serial bus trigger and decode functions for UART, LIN, CAN, SPI and I²C protocols.
Does it support FFT analysis?
Yes. FFT is available as a mathematical function to help inspect the frequency components of captured waveforms.
Can I connect the oscilloscope to a PC?
Yes. It provides USB host and USB device interfaces for supported USB storage and PC communication workflows.
Are probes included?
The current product listing states that two probe sets are included. Please confirm the exact probe model and attenuation rating for the supplied batch.
Can I measure mains voltage directly with it?
Do not connect mains voltage directly without checking the oscilloscope’s input rating, probe rating and measurement category. Use an appropriate rated probe and safe measurement setup; seek qualified assistance when needed.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.