Crucial P3 Plus 1TB PCIe Gen4 NVMe M.2 SSD

SKU: J786363 Categories: ,
  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

The Crucial P3 Plus 1TB (CT1000P3PSSD8) is a PCIe Gen4 x4 NVMe M.2 2280 SSD for compatible desktops, laptops and gaming PCs. It offers rated sequential speeds up to 5,000MB/s read and 3,600MB/s write, with 220TBW endurance and a limited 5-year manufacturer warranty.

  • Capacity: 1TB
  • Model: CT1000P3PSSD8
  • Interface: PCIe Gen4 x4 NVMe
  • Form Factor: M.2 2280
  • Sequential Read: Up to 5,000MB/s
  • Sequential Write: Up to 3,600MB/s
  • NAND: Micron 3D NAND (QLC series)
  • Endurance: 220TBW
  • Warranty: Limited 5-year manufacturer warranty

₨22,000.00

Out of stock

Out of stock

Description

The Crucial P3 Plus 1TB PCIe Gen4 NVMe M.2 SSD (CT1000P3PSSD8) is an internal solid-state drive for compatible desktops, laptops and gaming PCs. It uses a PCIe 4.0 x4 NVMe interface and compact M.2 2280 form factor, with rated sequential speeds of up to 5,000MB/s read and 3,600MB/s write. Its 1TB capacity provides fast storage for your operating system, applications, games and everyday files.

Crucial P3 Plus 1TB – Key Features

PCIe Gen4 NVMe

PCIe 4.0 x4 interface designed for high-speed data transfer on compatible systems.

Up to 5,000MB/s Read

Rated sequential read speeds up to 5,000MB/s and write speeds up to 3,600MB/s for the 1TB model.

1TB M.2 2280 Storage

Compact internal storage for compatible M.2 NVMe slots in desktops and laptops.

Micron 3D NAND

Built with Micron 176-layer 3D NAND technology in the original product specification.

220TBW Endurance

The 1TB model carries a manufacturer endurance rating of 220 terabytes written.

SSD Management Support

Crucial provides Storage Executive and Acronis True Image for Crucial software resources.

Performance for Everyday Computing and Gaming

The P3 Plus 1TB is rated for sequential reads up to 5,000MB/s and sequential writes up to 3,600MB/s. These are manufacturer maximum figures measured under specified test conditions; actual results vary by system, workload, drive capacity and available PCIe bandwidth.

The drive is backward compatible with many PCIe Gen3 systems, but will operate at the lower speeds supported by the host interface. It is designed for general client workloads and is not the same product tier as Crucial’s higher-end P5 Plus.

Technical Specifications

Brand Crucial (Micron)
Series P3 Plus
Model / Part Number CT1000P3PSSD8
Capacity 1TB
Form Factor M.2 2280
Interface PCIe Gen4 x4 NVMe
Sequential Read Up to 5,000MB/s
Sequential Write Up to 3,600MB/s
Random Read Up to 650,000 IOPS
Random Write Up to 800,000 IOPS
NAND Micron 3D NAND (176-layer at launch)
Endurance 220TBW
MTTF 1.5 million hours
Operating Temperature 0°C – 70°C
Features Dynamic write acceleration, TRIM, SMART, ECC, RAIN, adaptive thermal protection
Warranty Limited 5-year manufacturer warranty, or until rated TBW limit is reached, subject to terms

Compatibility and Installation

  • Requires an M.2 slot that supports PCIe NVMe SSDs. M.2 SATA-only slots are not compatible.
  • Check your motherboard or laptop manual for M.2 2280 support and PCIe lane availability.
  • Compatible with PCIe Gen4 systems for rated Gen4 performance and backward compatible with many Gen3 systems at reduced speeds.
  • Confirm the physical clearance and thermal requirements of your system before installation. Heatsink inclusion is not specified for this part number in the product flyer; check the actual package before assuming one is included.
  • After installation, initialize and format the drive in your operating system if it is not automatically detected.

Frequently Asked Questions

What are the speeds of the Crucial P3 Plus 1TB?

The 1TB model is rated for sequential read speeds up to 5,000MB/s and write speeds up to 3,600MB/s. Actual performance depends on the system and workload.

Is the P3 Plus compatible with PCIe Gen3?

Yes, it is backward compatible with many PCIe Gen3 systems. It will run at the speed supported by the host system rather than its full Gen4 rating.

Will it work in any M.2 slot?

No. Your device must support an M.2 2280 PCIe NVMe drive. An M.2 SATA-only slot will not work. Check your motherboard or laptop specifications first.

What is the endurance rating of the 1TB model?

The Crucial P3 Plus 1TB is rated for 220TBW (terabytes written). The limited 5-year warranty is subject to the manufacturer’s terms, including the rated TBW limit.

Does the Crucial P3 Plus use TLC or QLC NAND?

The P3 Plus series uses QLC NAND. The original product specification references Micron 176-layer 3D NAND. NAND components may vary across production revisions.

Is the P3 Plus suitable for gaming?

Yes. It can store games and help reduce loading times on compatible systems. Game load performance also depends on the game, CPU, platform and other system components.

Does it include a heatsink?

Heatsink inclusion is not confirmed for this part number in the product flyer. Check the actual package and your motherboard’s M.2 cooling arrangement before installation.

Why Buy from PcGuy Computers?

  • Product details to help you check M.2 NVMe and PCIe compatibility.
  • Assistance choosing storage for gaming, work and everyday computing.
  • Order support for customers across Pakistan.
  • Contact PcGuy Computers to confirm restock timing and applicable local warranty arrangements.

Explore the Crucial P3 Plus 1TB NVMe SSD in Pakistan for PCIe Gen4 storage, up to 5,000MB/s sequential reads, 3,600MB/s writes and 220TBW endurance in an M.2 2280 design. Confirm your device supports PCIe NVMe before ordering.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Crucial P3 Plus 1TB PCIe Gen4 NVMe M.2 SSD”

Your email address will not be published. Required fields are marked *