CRUCIAL 4GB DDR3L 1600MHz CL11 1.35V MEMORY

SKU: BC0000080 Categories: ,
  • Pick up from PcGuy Computers Store

Tara 4421, Queensland

Free

  • AusPost Standard

Standard post to your specified address using PakistanPost

 

2-6 Days

From $10

  • AusPost Express

Express post to your specified address using PakistanPost

1-4 Days

From $15

Upgrade a compatible legacy system with Crucial 4GB DDR3L 1600MHz CL11 memory. This single 4GB low-voltage DDR3L module is designed for supported platforms, with compatibility depending on the exact DIMM or SO-DIMM variant supplied.

  • Capacity: 4GB (1 × 4GB)
  • Memory: DDR3L · 1600MHz · PC3L-12800
  • Latency / Voltage: CL11 · 1.35V
  • Memory Type: Unbuffered · Non-ECC
  • Form Factor: Confirm exact DIMM / SO-DIMM variant before ordering
  • Compatibility: Systems specifically supporting DDR3L 1600 memory

₨8,800.00

7 in stock

7 in stock

Description

Crucial 4GB DDR3L 1600MHz CL11 1.35V Memory is a single 4GB low-voltage memory module for compatible DDR3L desktop or notebook systems. It offers PC3L-12800 data rate and CL11 timing for supported legacy platforms.

DDR3L memory for compatible legacy system upgrades

Important compatibility note: The store listing does not identify the exact Crucial part number or whether the supplied module is a desktop UDIMM or laptop SO-DIMM. These formats are physically different. Confirm the exact form factor and pin layout with PcGuy Computers before ordering.

4GB Capacity

One 4GB memory module for a compatible DDR3L system.

DDR3L 1600MHz

PC3L-12800 data rate for supported legacy platforms.

CL11 Timing

CAS latency 11 for standard DDR3L operation.

1.35V Low Voltage

Designed for platforms that support 1.35V DDR3L memory.

Non-ECC Memory

Standard unbuffered, non-ECC memory for compatible systems.

Crucial by Micron

Memory from Crucial, a Micron brand.

Product Overview

Crucial DDR3L memory is intended for older desktop and notebook platforms that specifically support the DDR3L generation. A memory upgrade may improve responsiveness when a system is running short of available RAM, but the result depends on the operating system, processor, storage and installed memory configuration.

This listing describes a 4GB DDR3L-1600 CL11 module. Crucial has produced both desktop UDIMM and laptop SO-DIMM versions with similar capacity and speed. Since the store listing does not state the exact module part number or physical format, do not assume that this module fits both laptop and desktop systems. Confirm the exact variant before purchase.

Technical Specifications

Brand Crucial (Micron)
Capacity 4GB (single module)
Memory Technology DDR3L SDRAM
Rated Speed 1600MHz (PC3L-12800)
CAS Latency CL11
Rated Voltage 1.35V
ECC Non-ECC
Buffering Unbuffered
Module Quantity 1
Form Factor Not specified in the store listing; confirm UDIMM or SO-DIMM variant
Pin Count Variant-dependent: common DDR3 desktop UDIMM is 240-pin; DDR3 SO-DIMM is 204-pin
Part Number Exact Crucial manufacturer part number not provided in the listing
Warranty Crucial publishes limited lifetime warranty for its memory products; local eligibility and claim terms must be confirmed with the seller

Compatibility & Installation

  • Check your motherboard or laptop manual to confirm DDR3L support, maximum capacity and supported memory speed.
  • Confirm whether your system requires a 240-pin desktop UDIMM or a 204-pin laptop SO-DIMM. These modules are not interchangeable.
  • Do not confuse DDR3L with DDR4 or DDR5; different memory generations use different slots and are not interchangeable.
  • Confirm voltage requirements. DDR3L is designed for 1.35V operation; some compatible platforms and modules also support 1.5V, but this must be verified for the exact module and system.
  • Supported systems may run memory below 1600MHz depending on the processor and motherboard.
  • Power off the system and disconnect it from power before installation. Follow the device manufacturer’s service instructions.

Frequently asked questions

Is this Crucial RAM 4GB?

Yes. The listing is for one 4GB DDR3L memory module.

What speed and latency does it offer?

The listed specification is DDR3L-1600 (PC3L-12800) with CL11 timing.

Does it operate at 1.35V?

Yes. The listed rated voltage is 1.35V. Confirm your system supports DDR3L low-voltage memory.

Is this RAM for a laptop or desktop?

The current store listing does not specify the exact form factor. Crucial offers similar 4GB DDR3L modules as both desktop UDIMM and laptop SO-DIMM, so confirm the supplied variant before ordering.

How many pins does this memory have?

The pin count depends on the physical variant: common desktop DDR3 UDIMMs use 240 pins, while DDR3 SO-DIMMs use 204 pins. Please verify the exact variant.

Can I use it with standard DDR3 memory?

Only if the exact module and system support the required voltage and DDR3L compatibility. Check the system manufacturer’s memory specifications before mixing modules.

Is it compatible with DDR4 or DDR5 systems?

No. DDR3L is a different memory generation and cannot be installed in DDR4 or DDR5 slots.

Is this ECC or registered RAM?

The listed specification is unbuffered, non-ECC memory.

Will it run at 1600MHz in my computer?

Only if the processor and motherboard support that speed. Otherwise, the system may run it at a lower supported speed.

What warranty is available?

Crucial publishes a limited lifetime warranty for memory products. Local coverage and claim eligibility can vary, so confirm the applicable terms with PcGuy Computers.

Why Buy from PcGuy Computers?

  • Product information presented to help you check compatibility.
  • Assistance with selecting suitable memory for older systems.
  • Pakistan-wide order and delivery support.
  • Help with product and after-sales queries.

Choose Crucial 4GB DDR3L 1600MHz memory for a compatible legacy system, after confirming the exact module format and voltage requirements.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “CRUCIAL 4GB DDR3L 1600MHz CL11 1.35V MEMORY”

Your email address will not be published. Required fields are marked *