Bitmain APW7 1600W 1U Mining Power Supply Unit (PSU)
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The Bitmain APW7 Antminer Mining Power Supply is a dedicated 12V PSU for compatible ASIC miners. Bitmain documentation specifies up to 1800W at 200–240V AC input and 800W at 100–140V AC input, with ten standard 6-pin PCIe output terminals. Verify your miner model and input supply before use.
- Model: APW7 / APW7-12-1800 Series
- DC Output: 12V
- Rated Power: 1800W (200–240V) · 800W (100–140V)
- Connectors: 10 × 6-pin PCIe mining outputs
- AC Input: C14 inlet · compatible C13 cord
- Cooling: Forced-Air Fan
- Warranty: 12-Month PcGuy Listing Warranty
₨26,400.00
6 in stock
6 in stock
Description
The Bitmain APW7 Antminer Mining Power Supply is a dedicated 12V power supply designed for compatible ASIC cryptocurrency miners. It provides up to 1800W at 200–240V AC input and is rated for reduced output at lower input voltage. Its standard cable configuration includes ten 6-pin PCIe output connectors. Match the PSU to your exact miner model and local electrical supply before use.
Purpose-Built for Compatible ASIC Miners
The APW7 is designed for Bitmain Antminer mining hardware that requires a compatible 12V power supply and 6-pin PCIe power connections. It is not a conventional ATX desktop computer PSU. Confirm your miner’s supported PSU model, required power and connector arrangement before connecting it.
Output Depends on AC Input Voltage
Bitmain’s APW7-12-1800 documentation specifies 1800W (150A at 12V) with 200–240V AC input. At 100–140V AC input, the documented rated output is reduced to 800W (67A). Do not assume the full rated output is available from every wall outlet or circuit. Follow the miner and PSU input-voltage requirements.
12V DC Output and PCIe Connections
The APW7 supplies 12V DC output. Its standard output cable configuration contains ten 6-pin PCIe terminals, each intended for compatible mining hardware connections. These are mining PSU 6-pin outputs, not the 6+2-pin PCIe connectors commonly found on desktop graphics-card power supplies.
Forced-Air Cooling
The APW7 uses an integrated forced-air cooling system to move air through the power supply during operation. Maintain clear airflow around the unit and keep ventilation openings free of dust and obstructions, especially in a mining environment.
Electrical Protection and Operating Conditions
APW7 documentation lists low-voltage input, output short-circuit, output over-current and over-temperature protection. The manual specifies an operating temperature range of -20°C to 60°C and non-condensing humidity conditions. Actual safe operation depends on installation, airflow, input supply and connected miner load.
Key Features
Up to 1800W Output
Rated 1800W at 200–240V AC input; output is reduced at lower input voltage.
12V DC Output
150A rated current at 200–240V input, according to APW7 documentation.
10 PCIe 6-Pin Outputs
Standard output cable configuration with ten 6-pin mining power terminals.
ASIC Mining Application
Designed for compatible Bitmain Antminer mining hardware, not standard ATX PCs.
Forced-Air Cooling
Integrated fan cooling for operation under sustained mining loads.
Built-In Protection
Low-voltage input, short-circuit, over-current and over-temperature protection.
Technical Specifications
| Brand | Bitmain |
|---|---|
| Model | APW7 / APW7-12-1800 Series |
| DC Output Voltage | 12.0V |
| Rated Power (200–240V AC Input) | 1800W |
| Rated Current (200–240V AC Input) | 150A |
| Rated Power (100–140V AC Input) | 800W |
| Rated Current (100–140V AC Input) | 67A |
| Standard Output Connections | 10 × 6-pin PCIe terminals |
| AC Input Connector | C14 (uses compatible C13 power cord) |
| Input Frequency | 50/60Hz |
| Power Factor | Greater than 0.99 at full load |
| Ripple and Noise | Less than 1% |
| Voltage Accuracy | 12.0–12.5V |
| Cooling | Forced-air cooling |
| Operating Temperature | -20°C to 60°C |
| Operating Humidity | 20%–90% RH, non-condensing |
| Dimensions | 206 × 110 × 62mm (manual specification) |
| Weight | Approximately 2.0kg (manual specification) |
| Protection | Low-voltage input, output short-circuit, output over-current, over-temperature |
| Warranty | 12-Month PcGuy Listing Warranty |
Compatibility and Installation
- Use only with a Bitmain Antminer model that explicitly supports the APW7 and its 12V output.
- Check the miner’s exact power demand and connector layout; compatibility varies between Antminer generations and models.
- Confirm the available AC supply voltage. The rated output is 1800W at 200–240V input and 800W at 100–140V input.
- The PSU has a C14 AC inlet and requires a compatible C13 power cord. Bitmain advises using a suitable cord rated for the required current and local electrical standards.
- Connect the 6-pin outputs only to compatible miner power inputs. Do not treat them as standard desktop GPU 6+2-pin cables.
- Provide adequate ventilation and keep the PSU’s cooling air path unobstructed.
- Power down and disconnect AC input before installing, removing or changing output connections.
What’s Included
- 1 × Bitmain APW7 mining power supply
- Standard attached output cable assembly, subject to the supplied unit configuration
- AC power cord is not confirmed as included; check the package contents before installation.
Ideal For
- Compatible Bitmain Antminer ASIC miners
- Replacement power supply for supported mining hardware
- ASIC mining installations with the correct AC input supply
- Mining setups requiring multiple 6-pin PCIe power outputs
Why Choose the Bitmain APW7?
The Bitmain APW7 is a purpose-built mining PSU with 12V output, ten standard 6-pin PCIe terminals and a rated 1800W output at 200–240V AC input. It is important to match its voltage, available input power and output connectors to the exact Antminer model. This unit is not intended as a general-purpose desktop ATX power supply.
Frequently Asked Questions
Is the Bitmain APW7 compatible with desktop PCs?
No. The APW7 is a dedicated mining power supply for compatible ASIC hardware. It does not use the standard ATX motherboard power connections expected by ordinary desktop PCs.
Does the APW7 provide 1600W or 1800W?
Bitmain’s APW7-12-1800 documentation specifies 1800W at 200–240V AC input and 800W at 100–140V AC input. The actual unit label and revision should be checked before installation; do not rely on the 1600W wording in the product title alone.
Can the APW7 run at full output from a 110V supply?
No. The APW7 manual rates output at 800W for 100–140V AC input. Its 1800W rating applies at 200–240V AC input.
How many power connectors does it have?
The standard APW7 output cable configuration described in the manual contains ten 6-pin PCIe output terminals. Confirm the cable arrangement on the supplied unit.
Are these standard GPU PCIe 6+2-pin connectors?
No. The APW7 manual describes 6-pin mining power terminals. They should only be connected to compatible miner inputs and must not be assumed to be desktop GPU 6+2-pin cables.
Which Antminer models are compatible?
Compatibility depends on the exact Antminer model and its power requirements. Check Bitmain’s current PSU compatibility guidance for your miner before purchase; do not assume every Antminer supports the APW7.
What AC power cable does the APW7 use?
The PSU has a C14 inlet and uses a compatible C13 AC power cord. Bitmain advises selecting a cord with an appropriate current rating and compliance with local electrical standards.
What cooling and protection features are included?
The APW7 uses forced-air cooling and documents low-voltage input, output short-circuit, output over-current and over-temperature protection.
What are the APW7 dimensions?
The APW7 manual lists dimensions of approximately 206 × 110 × 62mm. Check the physical dimensions of the supplied unit and your intended mounting space.
Can the APW7 operate continuously for mining?
It is designed for mining PSU use, but continuous operation depends on correct miner compatibility, input voltage, load, ventilation and operating conditions. Follow the manufacturer’s safety and installation instructions.
Shop the Bitmain APW7 Antminer Mining Power Supply at PcGuy Computers. This 12V ASIC mining PSU has ten standard 6-pin PCIe outputs and is rated for 1800W at 200–240V AC input or 800W at 100–140V AC input. Confirm compatibility with your exact miner before ordering.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.