Edimax EA3-005SFA Cat7 Flat Ethernet Cable (0.5m, black)
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
Edimax EA3-005SFA Cat7 Flat Ethernet Cable is a 0.5m black shielded network cable for short wired connections between compatible routers, switches, computers and other RJ45 devices. Its slim flat design supports neat routing around corners and behind furniture.
- Model: EA3-005SFA
- Category: Cat7 U/FTP
- Length: 0.5m / 1.64ft
- Colour: Black
- Speed: Up to 10Gbps (published maximum)
- Bandwidth: Up to 600MHz
- Conductor: 100% oxygen-free bare copper, 32AWG
- Shielding: Four foil-shielded twisted pairs and grounding wire
- Connectors: Gold-plated RJ45 (8P8C)
- Compatibility: Cat5, Cat5e, Cat6 and Cat6A equipment/cabling
₨1,760.00
4 in stock
4 in stock
Description
The Edimax EA3-005SFA Cat7 Flat Ethernet Cable is a 0.5-metre black shielded network cable for short, reliable wired connections between compatible routers, switches, computers, network adapters, smart TVs and other RJ45-equipped devices. Its slim flat profile helps route cable neatly along edges, around corners, behind furniture or under suitable carpets. The EA3 series is specified for up to 10Gbps Ethernet and 600MHz bandwidth under suitable network conditions.
Key Features
Cat7 Ethernet
Designed for high-performance wired networking, with a published maximum data rate of up to 10Gbps.
600MHz Bandwidth
Supports up to 600MHz bandwidth as specified for the Edimax EA3 series.
Flat, Slim Profile
Routes neatly along walls, furniture edges and corners, including suitable under-carpet installations.
Shielded U/FTP Construction
Four shielded twisted pairs with aluminium-foil shielding and a grounding wire help reduce interference and crosstalk.
Oxygen-Free Copper
Uses a 100% oxygen-free bare copper conductor core, according to Edimax specifications.
Gold-Plated RJ45
RJ45 (8P8C) connectors feature gold-plated contact pins for compatible Ethernet ports.
Technical Specifications
| Brand | Edimax |
|---|---|
| Series | EA3 |
| Model | EA3-005SFA |
| Cable Category | Cat7 |
| Length | 0.5m / 1.64ft |
| Colour | Black |
| Cable Construction | U/FTP, four shielded twisted pairs |
| Conductor | 100% oxygen-free bare copper |
| Shielding | Aluminium foil shielding and grounding wire |
| Connector | RJ45 (8P8C), gold-plated contact pins |
| Conductor Gauge | 32 AWG |
| Jacket | PVC |
| Maximum Bandwidth | Up to 600MHz |
| Maximum Data Rate | Up to 10Gbps |
| Standards | ISO/IEC 11801 Class Ea; TIA/EIA 568B |
| Certifications | REACH, CE and RoHS (EA3 series published specifications) |
| Compatibility | Backward compatible with Cat5, Cat5e, Cat6 and Cat6A cabling |
Compatible Devices and Applications
- Routers and switches: Connect a router to a switch or a nearby wired network device.
- Desktop PCs and laptops: Connect devices with an Ethernet RJ45 port or compatible network adapter.
- Smart TVs and media devices: Use a wired network connection where an RJ45 port is available.
- Network storage and servers: Connect compatible NAS devices, servers and other Ethernet equipment.
- Consoles and printers: Connect supported game consoles, network printers and other RJ45 devices.
- Neat cable routing: The flat profile is useful for short runs along edges, behind furniture and around corners.
Installation Guide
- Check that both devices have standard RJ45 Ethernet ports.
- Insert one connector into the source device and the other into the target device or network port.
- Ensure both connectors are fully seated and the cable is not sharply folded, crushed or stretched.
- For under-carpet routing, use a suitable low-traffic path and avoid heavy furniture or repeated foot pressure on the cable.
- Actual network speed depends on the Ethernet ports, connected equipment, network configuration and cable installation conditions.
Important Before Buying
This is a 0.5-metre cable, intended for short connections; measure the required route before ordering. The 10Gbps and 600MHz figures are maximum published cable-series specifications, not a guarantee that connected devices will operate at those speeds. Both ends of the network link and the rest of the network must support the desired speed. The cable uses standard RJ45 connectors and can be used with compatible lower-category Ethernet equipment. Flat construction helps with routing but should not be pinched, sharply creased or placed where it can be damaged.
Frequently Asked Questions
What is the length of the Edimax EA3-005SFA cable?
It is 0.5 metres long, approximately 1.64 feet.
Does this cable support 10Gbps Ethernet?
Edimax specifies up to 10Gbps data transmission for the EA3 Cat7 series. Actual link speed depends on the connected network ports and installation conditions.
What is the bandwidth rating?
The published maximum bandwidth rating is 600MHz.
Is this cable suitable for routers and switches?
Yes. It uses standard RJ45 connectors and can connect compatible routers, switches, computers and other Ethernet devices.
Can I use it with Cat5e or Cat6 equipment?
Yes. Edimax lists backward compatibility with Cat5, Cat5e, Cat6 and Cat6A cabling. The network link will operate according to the capabilities of the connected equipment and cabling.
What makes this cable flat?
Its slim flat profile is designed to route more neatly along edges, around corners, behind furniture and under suitable carpets compared with a conventional round cable.
Is the cable shielded?
Yes. The EA3 series uses U/FTP construction with four shielded twisted pairs, aluminium-foil shielding and a grounding wire.
Will it increase my internet speed?
A cable does not increase the speed provided by your internet package. It can provide a wired connection, while achievable speed depends on your router, device, network port and internet service.
Why Buy from PcGuy Computers?
PcGuy Computers provides product information and assistance to help customers select suitable networking accessories. Check current availability, delivery arrangements and applicable warranty terms with the store before ordering.
Edimax EA3-005SFA – Summary
The Edimax EA3-005SFA is a black 0.5m Cat7 flat Ethernet cable with shielded U/FTP construction, oxygen-free bare copper conductors and gold-plated RJ45 connectors. Its slim profile suits short wired network connections where tidy cable routing is important.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.