PNY PERFORMANCE 8GB DDR4 2666MHz DESKTOP MEMORY – MD8GSD42666BL
-
Pick up from PcGuy Computers Store
Tara 4421, Queensland
Free
-
AusPost Standard
Standard post to your specified address using PakistanPost
2-6 Days
From $10
-
AusPost Express
Express post to your specified address using PakistanPost
1-4 Days
From $15
The PNY Performance 8GB DDR4 2666MHz Desktop Memory is a single 8GB RAM module for compatible desktop PCs. With 2666MHz speed, CL19 timing, 1.2V operation and a standard 288-pin UDIMM design, it is a practical upgrade for everyday computing and multitasking.
- Capacity: 8GB (1 × 8GB)
- Memory Type: DDR4 Desktop RAM
- Speed: 2666MHz (PC4-21300)
- Latency: CL19
- Form Factor: 288-pin UDIMM
- Voltage: 1.2V
- Configuration: Non-ECC, unbuffered, single module
- Compatible Speeds: 2666 / 2400 / 2133MHz, subject to system support
- Model: MD8GSD42666BL (store listing)
- Warranty: PNY limited lifetime manufacturer warranty; regional terms apply
₨8,800.00
Out of stock
Out of stock
Description
Upgrade a compatible desktop PC with the PNY Performance 8GB DDR4 2666MHz Desktop Memory module. This single 8GB memory stick is designed for everyday computing, office work and general multitasking, with a 2666MHz data rate, CL19 latency and efficient 1.2V operation. Its standard 288-pin UDIMM format is intended for desktop motherboards that support DDR4 memory.
Add 8GB of DDR4 memory using one desktop RAM module.
PC4-21300 data rate for supported desktop platforms.
JEDEC-standard timing for dependable everyday desktop operation.
Designed to run at a standard DDR4 memory voltage of 1.2 volts.
Standard desktop DIMM form factor; not intended for laptop SO-DIMM slots.
Supports compatible systems running memory at 2666, 2400 or 2133MHz.
Technical Specifications
| Brand | PNY |
|---|---|
| Product Series | Performance Desktop Memory |
| Model (store listing) | MD8GSD42666BL |
| Capacity | 8GB (1 × 8GB) |
| Memory Type | DDR4 SDRAM |
| Speed | 2666MHz |
| Bandwidth | PC4-21300 |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| Form Factor | 288-pin desktop UDIMM |
| Channel Configuration | Single module / single-channel module |
| ECC | Non-ECC |
| Registered / Buffered | Unbuffered |
| Compatible Memory Speeds | 2666MHz, 2400MHz and 2133MHz, subject to system support |
| Manufacturer Warranty | PNY limited lifetime warranty; regional terms and local claim eligibility may vary |
Compatibility & Installation
- Desktop only: Check that your motherboard uses 288-pin DDR4 UDIMM memory. This module will not fit laptop SO-DIMM slots.
- Check motherboard support: Confirm that your motherboard and processor support 8GB DDR4 modules and the listed speeds.
- Speed configuration: The module can operate at a lower supported speed such as 2400MHz or 2133MHz when required by the platform. Actual speed depends on motherboard, processor and installed memory.
- Upgrade planning: For dual-channel operation, consult your motherboard manual and use a matched memory configuration in the recommended slots.
- Before installation: Shut down the PC, disconnect power and follow the motherboard manufacturer’s memory installation instructions.
Frequently Asked Questions
Why Buy from PcGuy Computers?
- Clear product specifications to help you check desktop compatibility.
- Pakistan-based assistance for product and order questions.
- Guidance on choosing compatible PC components for your upgrade.
- Warranty information can be confirmed with the store before ordering.
The PNY Performance 8GB DDR4 2666MHz Desktop Memory is a straightforward single-module upgrade for compatible DDR4 desktop PCs. Check your motherboard’s supported memory type, capacity and speed before purchase.

Arduino Modules & Sensors
Battery Compartments
Component Cases
Electronics Kits
Microcontroller Boards
Project Enclosures
Shields & Hats
Tablets
Laptops
Laptop Accessories
CPU (Processor)
CPU Coolers
GPU (Graphics)
HDD/ SSD (Storage)
MOBO (Motherboard)
PSU (Power Supply)
RAM (Memory)
Keyboard & Mouse Combo
Keyboards
Printers
USB
Reviews
There are no reviews yet.